TANDBERG D5018501 - Manual
TANDBERG D5018501 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
D5018501
Installation of X-Port 10 with Director
This document explains how to connect the X-Port 10 to the Director system. This feature allows easy
connections for an external portable computer and automatic switching between the internal and external
computer with the Director system.
Supplied Components:
•
1 Connector Box
•
1 RS232 Blanking Plate
•
1 Pair of export 10 Mounting Bracket (Left and Right)
•
2 T201-0036 Cables, 1 T201-0072 Cable, 1 T237-0072 Cable, 2 T112-0036 Cables, 1 T323-
0036 Cable, 1 T325-0072 Cable, 1 T324-0036 Cable, 1 T308-0036 Cable, 1 HD15D-Sub to
BNC cable
•
1 TANDBERG Director label
•
4 #10-32 G-style panel nut retainer and 4 #10-32 x ¾” Black rack screw with washer
•
10 Black adhesive cable tie mounting base14 cable ties 4” long
•
2 #4-40 x 3/16” screws
•
1 instruction sheet
RS232 Blanking Plate Installation:
Connector Box Installation:
•
Install the blanking plate over the
Computer 2
Serial
connector located on the rear of the
Smart 3000i projector unit using the 2 supplied
#4-40 x 1/8” screws.
•
Install the connector box on the rear of the
Smart 3000i as shown.
•
Use the existing screws on the 3000i projector
to fasten the connector box.
•
Route the cables through the opening and
connect them as per labels. (See System
Connections)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
