Page 2 - CAUTION; IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions-The safety and operating instructions should be retained for future reference. 3.Heed Warnings-All warnings on the appliance and in the operating instructions should b...
Page 4 - PRECAUTIONS; LOCATION
AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation....
Page 5 - TABLE OF CONTENTS; OPERATING CONTROLS AND FUNCTIONS 7; INDICE
- 5 - EN 9J27 TABLE OF CONTENTS A NOTE ABOUT RECYCLINGThis product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your l...
Page 7 - OPERATING CONTROLS AND FUNCTIONS
- 7 - EN 9J27 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - - REMOTE CONTROL - AUDIO VIDEO STOP/EJECT REW PLAY F.FWD VOLUME CHANNEL EARPHONE REC/OTR POWER REC 1 9 2 3 4 5 6 7 8 12 13 10 11 14 POWER WAKE-UP /SLEEP 1 2 3 4 5 6 7 8 9 +100 0 EJECT CHANNEL RETURN REW PLAY STOP F.FWD GAME RECORD...
Page 9 - CONNECTIONS; DIPOLE ANTENNA HOOK UP; Note to CATV system installer:; PREPARATION FOR USE
- 9 - EN 9J27 ANTENNA/CABLE CONNECTIONS DIPOLE ANTENNA HOOK UP 1. Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR. 2. Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter(accessory). 3. Plug the Matching Adapter t...
Page 10 - AUX; MOBILE CONNECTION
- 10 - EN 9J27 INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of thearrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by thepolarity (+/-) markings. 3)Replace the cover. EXTERNAL ...
Page 11 - SET UP FOR USE; CHANNEL SET UP FOR THE; Plug in the TV/VCR power cord; TO SELECT A DESIRED CHANNEL; CLOCK SET UP; AUTO CLOCK SETTING
- 11 - EN 9J27 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area.NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Justselect the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex ...
Page 12 - MANUAL CLOCK SETTING; In the example below, the clock is to be set to:
- 12 - EN 9J27 NOTES: • Auto clock setting only needs to be set once. But itcan be done again if the clock’s time has becomeincorrect for some reason. • If the TV/VCR is connected directly to a cableconverter box or satellite box, the local PBS stationmust be selected on the cable box itself, and th...
Page 13 - CHANNEL SET UP AGAIN; TO CHANGE CLOCK SETTING; CHANNEL
- 13 - EN 9J27 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Begin auto preset Press the PLAY...
Page 14 - SELECTING THE LANGUAGE; Select “LANGUAGE”
- 14 - EN 9J27 SELECTING THE LANGUAGE Make sure ... • Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language onthe screen menu and not the audio source. 1 Select “LANGUAGE” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point ...
Page 15 - TV OPERATION; WATCHING A TV PROGRAM; Select the channel number; BRIGHT; GAME MODE; TO CANCEL THE GAME MODE; PICTURE CONTROL; Select “PICTURE CONTROL”; DEGAUSSING
- 15 - EN 9J27 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttonson the remote control.Remember: If the TV/VCR is connected...
Page 16 - PLAYBACK; NORMAL PLAYBACK; This TV/VCR will operate with any cassette that has the; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 16 - EN 9J27 PLAYBACK NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, theTV/VCR will start playback automatically. 2 To begin playback Press the PLAY button.Note: If any menu is activated onthe screen, the PL...
Page 17 - PICTURE SEARCH; )Press it again and the TV/VCR will now search in; STILL PICTURE; ZERO RETURN; Press the COUNTER RESET button repeatedly.; TIME SEARCH
- 17 - EN 9J27 PICTURE SEARCH This feature is very useful in finding or skipping overa particular scene on a tape. In this mode, the soundwill be muted.1)You may view a video tape at a high speed in either a forward or reverse direction by pressingthe F.FWD or REW button during playback. (in theSP /...
Page 18 - RECORDING; TWO DIFFERENT TAPE SPEEDS; Tape Speed; ERASE PREVENTION; Select “USER’S SET UP”; TO CANCEL THE RENTAL MODE; TRACKING ADJUSTMENT
- 18 - EN 9J27 RECORDING TWO DIFFERENT TAPE SPEEDS Before recording, select the tape speed from : SPmode (Standard Play) or SLP mode (Super LongPlay).The table below shows the maximum recording/play-back time using T60, T120 or T160 tapes in eachmode. Note: You can play back a tape recorded in LP mo...
Page 19 - NOTE: This unit will ONLY record and view the same channel.; NORMAL RECORDING; or
- 19 - EN 9J27 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. You can ONLY w...
Page 20 - Begin OTR; The program with an earlier start has priority.; Select “TIMER PROGRAMMING”; TIMER RECORDING; Display; pushes
- 20 - EN 9J27 3 Begin OTR Press the REC/OTR button on theTV/VCR as many times as needed.The recording length will be deter-mined by the number of times youpress the REC/OTR button. Eachadditional push will increase the recording time by30 minutes. It is set up to 8 hours. OTR(2 : 30) SP Avoid over ...
Page 21 - TO CORRECT A PROGRAM; )Press the POWER button to set automatic timer
- 21 - EN 9J27 For every day recording : To record a TV program atthe same time on the same channel every day.(Example: Monday through Sunday) Press the STOP/ L (down) button until “EVRY DAY” appears.Then, press the F.FWD/ B but- ton. For weekly recording : To record a TV program atthe same time on ...
Page 22 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; WAKE UP TIMER; Use the remote control for this procedure.; Select “WAKE UP TIMER”
- 22 - EN 9J27 TO CANCEL AN AUTOMATIC TIMERRECORDING • After setting a program; 1)Press the POWER button.2)Repeat steps [1] ~ [2] on page 20 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button.4)Press the MENU button on the remote control to return to TV mode. • While recording...
Page 23 - TO CANCEL THE WAKE UP TIMER; Select “SLEEP TIMER”; TO CANCEL THE SLEEP TIMER; COPYING A VIDEO TAPE
- 23 - EN 9J27 3 Set wake up time Press the PLAY/ K or STOP/ L but- ton until to point to “TIME”.Press the F.FWD/ B or REW/ s button until your desired wake uptime appears.Each additional push will increase (or decrease) thetime by 10 minutes. 4 Exit the Wake Up Timer setting Press the MENU button o...
Page 24 - MAINTENANCE; chase a good quality VHS Video Head Cleaner.; SERVICING; ON SCREEN DISPLAY; REAL TIME TAPE COUNTER; Press once
- 24 - EN 9J27 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe TV/VCR with a soft cloth immersed in luke-warm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/VCR. Such chemicalsmay cause damage and discoloration to theexpo...
Page 25 - TROUBLESHOOTING GUIDE; PROBLEM
- 25 - EN 9J27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem. PROBLEM CORRECTIVE ACTION No power. • M...
Page 26 - SPECIFICATIONS
- 26 - EN 9J27 GENERAL SPECIFICATIONS CRT : 9 inch in-line gun, 90˚deflection tube Television system : NTSC-M Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 C...
Page 27 - CONTROLES DE OPERACIÓN Y SUS FUNCIONES
- 27 - ES 0M14 1 Toma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otravideograbadora. 2 Toma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de su videocámara u otra videograbadora. 3 Indicador de grabación (RECORD)– Pa...
Page 29 - CONEXIONES DE ANTENA/CABLE
- 29 - ES 0M14 CONEXION DE LA ANTENA BIPOLAR 1. Introduzca la varilla de la antena bipolar (accesorio) en el orifi- cio destinado para la antena, en la parte trasera de la TV/VCR. 2. Conecte el cable bifilar plano de la antena bipolar al adaptador de acoplo (accesorio) de 300/75 ohm. 3. Enchufe el a...
Page 30 - INSTALACIÓN DE LAS PILAS; CONEXION MOVIL
- 30 - ES 0M14 1) Abra la tapa del compartimiento de las pilas del mando a distancia presionándola en el sentido de la flecha. 2) Inserte 2 pilas tamaño “AA” en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad(+/-). 3) Vuelva a poner la tapa. INSTALACIÓN DE LAS PILA...
Page 32 - LIMITS AND EXCLUSIONS:; FUNAI CORPORATION
FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year fromthe date of original retai...
