Page 2 - CAUTION; IMPORTANT SAFEGUARDS
– 2 – EN 0C28 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating inst...
Page 4 - RADIO-TV INTERFERENCE; ) Connect the equipment into an outlet on a cir-; IMPORTANT COPYRIGHT INFORMATION; USE OF CONTROLS OR ADJUST-; PRECAUTIONS; A NOTE ABOUT RECYCLING; TO PREVENT ELECTRIC SHOCK,
– 4 – EN 0C28 RADIO-TV INTERFERENCE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipm...
Page 5 - QUICK; SYMBOLS USED IN THIS MANUAL
– 5 – EN 0C28 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCATION For safe operation and satisfactory performance ofyour unit, keep the following in mind when selectinga place for its installation: • Shield it from direct sunlight and keep it away fromsources of intense heat. • Avoid dusty or hu...
Page 6 - TABLE OF CONTENTS; TV SECTION
– 6 – EN 0C28 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5AVOID THE HAZARDS OF ELECTRICALSHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5...
Page 7 - FEATURES
– 7 – EN 0C28 TV Mode DVD Mode ¡ Dolby Digital sound This unit can handle Dolby Digital surround soundhaving 5.1 channels when connected to a Dolby Digitaldecoder. ¡ Still/fast/slow/step playback Various playback modes are available including still pic-tures, fast forward/reverse, slow motion and st...
Page 8 - Stops operation of the disc.; SKIP; Pauses the current disc operation.; OPERATING CONTROLS AND FUNCTIONS; REMOTE CONTROL; Press to turn the power on and off.
– 8 – EN 0C28 7. Remote Sensor Window 8. STOP Button [page 20] Stops operation of the disc. 9. SKIP H Button [page 21] Plays back from the beginning of the currentchapter or track. SEARCH (REV) E Button (Front Panel) [page 21] During playback or in the pause mode, press andhold button down for a few...
Page 9 - INSTALLING THE BATTERIES
– 9 – EN 0C28 COAXIAL ANT. 39 38 37 Press to accept a setting. 32. Arrow ButtonsTV Mode: [page 13] Press to select a setting mode from the menu on theTV screen.Press to select or adjust from a particular menu. DVD Mode: [page 20] Use when making settings while watching the display on a TV screen. 33...
Page 10 - PREPARATION FOR USE; ANTENNA/CABLE CONNECTIONS; BLER BOX OR SATELLITE BOX; VHF/UHF COMBINED ANTENNA; Note to CATV system installer:
– 10 – EN 0C28 NOTE: Before plugging the antenna into the ANT. IN jack of the unit, check thatthe pin is not bent. If it is bent, straighten the pin as illustrated, then plugthe pin into the ANT. IN jack of the unit. PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS CABLE WITH CONVERTER/DESCRAM- BLER BO...
Page 11 - CONNECTING TO EXTERNAL INPUT JACKS; To the; AUX; CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
– 11 – EN 0C28 CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on anothersource (VCR or video camera), use the audio/videoinput jacks on the front of the unit.Connect the audio/video outputjacks of another source to theAUDIO L/R and VIDEO jacks ofthis unit. Then press SELECT unt...
Page 12 - CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
– 12 – CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, it outputs a DOLBYDIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digitaldecoder, you can enjoy a more convincin...
Page 13 - SELECTING THE LANGUAGE; CHANNEL SET UP; TV; SET UP FOR USE
– 13 – EN 0C28 SELECTING THE LANGUAGE 1 Plug in the TV/DVD power cord Plug the unit power cord into a standardAC outlet. NOTE: • If any digits appear in the corner ofthe screen, press POWER withoutunplugging the power cord. Make sure ... • Press POWER to turn on the unit. NOTE: This function effects...
Page 14 - to; Exit the channel setup mode; Press SETUP to return to TV mode.
– 14 – EN 0C28 DELETING (OR ADDING) CHANNEL(S) The channels you no longer receive or seldom watchcan be deleted from the memory. (Of course, you canadd the deleted channel into the memory again.) 1 Select “CHANNEL SET UP” Press SETUP on the remote control.Press Arrow ( K / L ) to point to “CHANNEL S...
Page 15 - Select the channel number; PICTURE CONTROL; Select “PICTURE CONTROL”; TV OPERATION
– 15 – EN 0C28 DEGAUSSING Magnetism from nearby appliances and speakersmight affect the color of the TV picture.If this happens, move this unit away from the appli-ance. If the color is still not correct, disconnect powercord from AC outlet then reconnect it after 30 minutes. WATCHING A TV PROGRAM 1...
Page 16 - CLOSED CAPTION SYSTEM; Select “CAPTION”; To cancel the sleep timer:; SLEEP TIMER
– 16 – EN 0C28 CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs,movies, news, etc. with either a dialogue caption ortext display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioningthe dialogues and the contents of news. TEXT mode: ...
Page 17 - TV RATING SET UP; Select “V-CHIP SET UP”; Selection; Exit the V-Chip setting mode
– 17 – EN 0C28 V-CHIP SET UP V-CHIP enables parents to prevent their childrenfrom watching inappropriate material on TV.V-CHIP reads the ratings for programming (exceptfor news and sports programs, unedited movies onpremium cable channels and Emergency BroadcastSystem signals), then denies access to...
Page 18 - MPAA RATING SET UP; CHANGE ACCESS CODE
– 18 – EN 0C28 • When you select the rating category and set it to[BLOCK], the higher rating will change to[BLOCK] automatically. Also, the lower rating willchange to [VIEW] automatically. • When you set “G” to [VIEW], all ratings willchange to [VIEW] automatically. 5 Exit the V-Chip setting mode Pr...
Page 19 - DVD SECTION; ABOUT THE DISCS; The following discs can be played back on this unit.; The following discs cannot be played back on this unit.; DVD with region codes other than 1 or ALL; PLAYABLE DISCS; Title 1; Example; Group 1
– 19 – EN 0C28 DVD SECTION ABOUT THE DISCS The following discs can be played back on this unit. ¡ DVD video ¡ DVD-R/RW* ¡ DVD+R/RW* ¡ Audio CD ¡ CD-R/RW* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, DVD+R/RW or CD-R/RW discs made ...
Page 20 - BASIC PLAYBACK; Getting started; CD; PLAYING A DISC; GENERAL FEATURES
– 20 – EN 0C28 BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com-ponents, if necessary. 1 Press POWER. ¡ The power will turn on. 2 Press OPEN/CLOSE to open disc loadingtray. 3 Place the chosen disc in the tray, with thelabel facing up. MP3 CD DVD-V PLAYING A DISC 4 Pr...
Page 21 - PAUSE; SEARCH
– 21 – EN 0C28 STEP BY STEP PLAYBACK 1 During playback, press PAUSE. ¡ Playback will pause and sound will be muted. 2 The disc goes forward by one frame eachtime PAUSE is pressed. 3 To exit step by step playback, press PLAY. DVD-V RESUME 1 During playback, press STOP. ¡ Resume message will appear on...
Page 22 - TRACK SEARCH; Using the number buttons on the remote control; TITLE / CHAPTER SEARCH; SEARCH FUNCTION; MARKER SETUP SCREEN; Press SEARCH MODE or RETURN to exit.
– 22 – EN 0C28 TRACK SEARCH There are three ways to begin playback on an AudioCD and MP3 at a specific track. Using the number buttons on the remote control 1 Press the number buttons to enter thedesired track number. ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), pres...
Page 23 - REPEAT; REPEAT TITLE / CHAPTER; PROGRAM; to select a track, then; RANDOM PLAYBACK; Press PLAY to start random playback.; SPECIAL PLAYBACK FUNCTION
– 23 – EN 0C28 REPEAT REPEAT TITLE / CHAPTER To activate the repeat function, press REPEATduring playback. ¡ The repeat mode changes as described below everytime you press the button. DVD-V REPEAT is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( current title repeat) ...
Page 24 - MP3 PLAYBACK; PLAYING A MP3 DISC
– 24 – EN 0C28 When a CD with MP3 files is in the unit, press DISCMENU to call up the MP3 menu on the TV screen. 1 In stop mode, press Arrow ( K / L ) to select the desired group or track. ¡ If a group is selected, press B or ENTER to go on to thetrack selection screen. PressArrow ( K / L ) to choos...
Page 25 - Press AUDIO during playback.; Press SUBTITLE during playback.; ) icon appears on the; Press ANGLE during playback.; CHANGING THE SETTINGS; Press MODE during playback.; The setting will be saved even if the unit is turned off.
– 25 – EN 0C28 AUDIO LANGUAGE The unit allows you to select a language during DVDdisc (if multi languages are available) playback. 1 Press AUDIO during playback. 2 Press AUDIO repeatedly to select yourdesired language. NOTE: ¡ Pressing AUDIO may not work on some DVDs withmultiple audio languages (e....
Page 26 - THE ON-SCREEN INFORMATION; For audio CDs; For MP3; Press DISPLAY during playback.; will be displayed when repeat play has been; Press DISPLAY again to exit the display.
– 26 – EN 0C28 For DVD-Vs 1 Press DISPLAY during playback to showcurrent Chapter. ¡ The elapsed and remainingplaying time of the currentchapter will be displayed. 2 Press DISPLAY again to show current Title. ¡ The elapsed and remaining playing time of the cur-rent title will be displayed. 3 Press DI...
Page 27 - CHANGING THE DVD SETUP ITEMS; Language options are not available with some discs.; Press Arrow; CUSTOM mode will appear.; then press ENTER to confirm.; Sets the audio language.; TO CHANGE THE ON-SCREEN MENUS; LANGUAGE SETTING
– 27 – EN 0C28 CHANGING THE DVD SETUP ITEMS Language options are not available with some discs. 1 Press SETUP twice in STOP mode so thatthe DVD SETUP menu appears. ¡ If the menu does not appear, press PLAY, STOP,then SETUP twice. 2 Press Arrow L to select “CUSTOM”, then press ENTER. ¡ CUSTOM mode wi...
Page 28 - AUDIO SETTINGS; When playing disc with copyright Protection; DISPLAY SETTING
– 28 – EN 0C28 AUDIO SETTINGS Choose the appropriate Audio settings for your equip-ment as it only affects during the playback of DVDdiscs. 1 Press SETUP twice in STOP mode so thatthe DVD SETUP menu appears. ¡ If the menu does not appear, press PLAY, STOP,then SETUP twice. 2 Press Arrow L to select ...
Page 29 - CONTROL LEVELS; ALL; All parental lock is cancelled.; Level 8; PARENTAL CONTROL; PARENTAL LEVEL; Record the password in case you forget it.; IF YOU FORGET THE PASSWORD; INITIALIZE; To cancel the initialization, select “NO”.
– 29 – EN 0C28 CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children)can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ¡ Level 1 Only DVD software intended for children can beplaye...
Page 30 - TROUBLESHOOTING GUIDE; Problem; TV Mode
– 30 – EN 0C28 If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-sulting the following checklist. TROUBLESHOOTING GUIDE Problem Corrective Action No Picture or Sound • Try a new channel, if OK, then possible station trouble. • Make sure the...
Page 31 - My unit is showing captions; DVD Mode
– 31 – EN 0C28 NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description inthis Owner’s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback. Closed Caption Probl...
Page 32 - DISC HANDLING; Do not use a hard cloth since this will mar the disc.; MAINTENANCE
– 32 – EN 0C28 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe unit with a soft cloth immersed in lukewarmwater and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the unit. Such chemicals maycause damage and discoloration to the exposed s...
Page 33 - Designs and specifications are subject to change without notice.; GENERAL SPECIFICATIONS; Terminals; SPECIFICATIONS
– 33 – EN 0C28 CRT : 20 inch in-line gun, 90˚ deflection tube Television system: NTSC-MTV Standard Closed caption system: §15.119/FCC Channel coverage: VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~13, A ~ W,W+1 ~ W+84,A-5 ~ A-1, 5A Tuning System: 181 channelfrequency synthesizedtuning system Channel access: Di...
Page 34 - INDICE; CONTROLES DE; PANEL FRONTAL DEL; Consulte la figura 1 de la página 8; MANDO A DISTANCIA; Consulte la figura 2 de la página 8; VISTA POSTERIOR; Consulte la figura 3 de la página 9; Botones de números
– 34 – ES 0C28 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 34 PANEL FRONTAL DEL TELEVISOR/DVD . . . . . . . . . . 34MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 34VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34PARA INSERTAR LAS PILAS . . . ...
Page 35 - ANTENA COMBINADA DE VHF/UHF; PREPARACIÓN PARA LA; Nota para el instalador de sistemas CATV; ) Abra la cubierta del compartimiento de las pilas; PARA INSERTAR LAS PILAS; Consulte la figura 4 de la página 10
– 35 – ES 0C28 21. Botón TITLE Visualiza el menú de títulos. 22. Botón CLEAR Repone un ajuste. 23. Botón DISPLAY Modo del televisor: Púlselo para visualizar el número del canal en lapantalla. Si lo pulsa de nuevo, el número del canaldesaparecerá. Modo de DVD: Visualiza el estado actual en la pantall...
Page 36 - ) Ponga el selector de canales del televisor/DVD
– 36 – ES 0C28 NOTA: • Cuando conecte una videograbadora monofónica(otra fuente) a este televisor/DVD, conecte la tomade salida de audio de la videograbadoramonofónica (otra fuente) a la toma AUDIO L deeste televisor/DVD. El audio saldrá igualmente porlos canales izquierdo y derecho. Utilice un cabl...
Page 37 - Enchufe el cordón de alimentación; Esta función afecta sólo el idioma en el menú; Seleccione “LANGUAGE”; para señalar; Seleccione “ENGLISH”, “ESPAÑOL” o “FRANÇAIS”; Si, por alguna razón, el menú está en español; SELECCIÓN DE IDIOMA; Consulte la figura 7 de la página 12; CONEXCIONA UN
– 37 – ES 0C28 1 Enchufe el cordón de alimentación del televisor/DVD Enchufe el cordón de alimentación deltelevisor/DVD en una toma de CA están-dar. NOTA: • Si aparecen algunas cifras en la esquina de la pan-talla, pulse el botón POWER sin desenchufar elcordón de alimentación. Asegúrese de que ... •...
Page 38 - El canal preparado NO es necesario cuando; Seleccione “AJUSTE DE CANAL”; Empiece el prefijado automático; Pulse el botón; Después de buscar; AJUSTE DE CANAL; La alimentación se conectará.; REPRODUCCIÓN DE UN
– 38 – ES 0C28 Puede programar el sintonizador para buscar todoslos canales que recibe en su localidad. NOTA: El canal preparado NO es necesario cuando esté conectado a una caja de cable o caja de satélite.Sólo tiene que seleccionar con el selector de canal deltelevisor/videograbadora al canal de sa...
Page 39 - MEMO
Page 40 - Printed in China; FUNAI CORPORATION; LIMITS AND EXCLUSIONS:; SERVICE CENTER; PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China 1EMN20057 T9002UC ★★★★★ FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for on...
Symphonic WF206
Manual
Symphonic 9 TVCP
Manual
Symphonic ST427FF
Manual
Symphonic SC313C
Manual
Symphonic SC309C
Manual
Symphonic VR-701
Manual
Symphonic WF802
Manual
Symphonic ST424FF
Manual
Symphonic WF24T5
Manual
Symphonic ZEKTOR MAS3
Manual
Symphonic WF32L6
Manual
Symphonic WF-13C2
Manual
Symphonic SC724DF
Manual
Symphonic SC309D
Manual
Symphonic SC313E
Manual
Symphonic DSC313B
Manual
Symphonic ST414FG
Manual
Symphonic CWF203
Manual
Symphonic CWF804
Manual
Symphonic WF2703
Manual