Page 2 - CAUTION; IMPORTANT SAFEGUARDS
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...
Page 4 - PRECAUTIONS; LOCATION; IMPORTANT COPYRIGHT INFORMATION
AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation....
Page 5 - TABLE OF CONTENTS; A NOTE ABOUT RECYCLING; OPERATING CONTROLS AND FUNCTIONS 7
- 5 - EN 9I03 TABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your ...
Page 7 - OPERATING CONTROLS AND FUNCTIONS
- 7 - EN 9I03 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - 1 VIDEO input jack– Connect to the video output jack of your video camera or another VCR. 2 AUDIO input jack– Connect to the audio output jack of your audio equipment, video camera oranother VCR. 3 POWER button– Press to turn TV/V...
Page 9 - PREPARATION FOR USE; ANTENNA/CABLE CONNECTIONS; VHF/UHF COMBINED ANTENNA; Note to CATV system installer:
- 9 - EN 9I03 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied with 13”model only) is detachable. Insert the stem of theantenna into the hole on the upper-back portion ofthe TV/VCR.Connect the VHF/UHF Rod Antenna orVHF/UHF Combination Antenna t...
Page 10 - INSTALLING THE BATTERIES; SET UP FOR USE; Plug in the TV/VCR power cord; CHANNEL SET UP FOR THE; Begin auto preset; EXTERNAL INPUT MODE; AUX
- 10 - EN 9I03 INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of thearrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by thepolarity (+/-) markings. 3)Replace the cover. SET UP FO...
Page 11 - CLOCK SET UP; Select “SETTING CLOCK”; AUTO CLOCK SETTING; Exit the Auto Clock Setting; MANUAL CLOCK SETTING; In the example below, the clock is to be set to:; TO SELECT A DESIRED CHANNEL
- 11 - EN 9I03 CLOCK SET UP (AUTO / MANUAL) Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if yourTV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. NOTES: • Auto ...
Page 12 - TO CHANGE CLOCK SETTING
- 12 - EN 9I03 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Beg...
Page 13 - SELECTING THE LANGUAGE; First Sunday of April :
- 13 - EN 9I03 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLAY/ K or STOP/ L but- ton to point to “ADD/DELETECH”.Press the F.FWD/ B button. ...
Page 14 - TV OPERATION; WATCHING A TV PROGRAM; Select the channel number; GAME MODE; TO CANCEL THE GAME MODE; PICTURE CONTROL; Select “PICTURE CONTROL”; DEGAUSSING
- 14 - EN 9I03 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttonson the remote control. Remember: If the TV/VCR is connecte...
Page 15 - TV RATING SET UP; CLOSED CAPTION SYSTEM
V-CHIP enables parents to prevent their childrenfrom watching inappropriate material on TV.V-CHIP reads the ratings for programming (exceptfor news and sports programs, unedited movies onpremium cable channels, and Emergency BroadcastSystem signals), then denies access to programmingif the program’s...
Page 16 - MPAA RATING SET UP; Selection
- 16 - EN 9I03 4 Select your desired item Press the PLAY/ K or STOP/ L but- ton to point to your desired item.Then, press the F.FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it[BLOCK], the higher rating will turn [BLOCK]automatically. Also, the lower ratin...
Page 17 - PLAYBACK; INSERTING A CASSETTE; This TV/VCR will operate with any cassette that has the; Set the FM mode; CHANGE ACCESS CODE
- 17 - EN 9I03 PLAYBACK INSERTING A CASSETTE Insert the cassette in the direction as shown. Push ingently, but continuously, on the center-back of thecassette until it is drawn into the TV/VCR. TheTV/VCR will automatically turn on. CORRECT Window WRONG This TV/VCR will operate with any cassette that...
Page 18 - PICTURE SEARCH; SEARCH; ZERO RETURN; WILL NOT; TIME SEARCH; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 18 - EN 9I03 PICTURE SEARCH This feature is very useful in finding or skipping overa particular scene on a tape. In this mode, the soundwill be muted.1)You may view a video tape at a high speed in either a forward or reverse direction by pressingthe F.FWD or REW button during playback (in theSP / ...
Page 19 - TO CANCEL THE RENTAL MODE; button on the remote control.; RENTAL PLAYBACK; INDEX SEARCH; button to; SLOW MOTION; If left in the Slow mode for more than five
- 19 - EN 9I03 NOTES: • Time Search can be set up to a maximum of 9hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, ineither direction. 1 Insert a ...
Page 20 - This unit will ONLY record and view the; RECORDING; ERASE PREVENTION; Tape Speed; NORMAL RECORDING
- 20 - EN 9I03 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tabin place. (If necessary, rewind or fast forward thetape to the point at which you want to beginrecording.) NOTE: This unit will ONLY record and view the same channel. RECORDING ERASE PREVE...
Page 21 - TIMER RECORDING; In the example below, the timer is being set to record:; Display; pushes
- 21 - EN 9I03 Avoid overlap of programs ... There is a chance that a program will not be record-ed. When programs overlap: • The program with the earliest start time will recordfirst. • Once the earliest program finishes recording, theoverlapping programs will record in the order ofthe program numb...
Page 22 - program using the PLAY/; TO CORRECT A PROGRAM; While setting a program; )Press the POWER button to set automatic timer; TIMER PROGRAM EXTENSION
- 22 - EN 9I03 For every day recording : Torecord a TV program at the sametime on the same channel everyday. (Example: Monday throughSunday) Press the STOP/ L (down) but- ton until “EVRY DAY” appears. Then, press theF.FWD/ B button. For weekly recording : To record a TV program atthe same time on th...
Page 23 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; Select “USER’S SET UP”; WAKE UP TIMER; Use the remote control for this procedure.; Select “WAKE UP TIMER”
- 23 - EN 9I03 TO CANCEL AN AUTOMATIC TIMERRECORDING • After setting a program; 1)Press the POWER button.2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want tocancel. 3)Press the T-PROG. CLEAR button.4)Press the MENU button on the remote control to return to TV m...
Page 24 - TO CANCEL THE WAKE UP TIMER; Select “SLEEP TIMER”; TO CANCEL THE SLEEP TIMER; COPYING A VIDEO TAPE
- 24 - EN 9I03 2 Select “TV” or “TAPE” Press the PLAY/ K or STOP/ L but- ton until it points to “TV/TAPE”.Press the F.FWD/ B or REW/ s button, and select [TV] or [TAPE]. 3 Set wake up time Press the PLAY/ K or STOP/ L but- ton until it points to “TIME”.Press the F.FWD/ B or REW/ s button until your ...
Page 25 - MAINTENANCE; chase a good quality VHS Video Head Cleaner.; SERVICING; ON SCREEN DISPLAY; WHEN THE CLOSED CAPTION MODE IS OFF:; The On Screen Display disappears after 5 seconds.; OFF mode; SPECIAL FEATURES; REAL TIME TAPE COUNTER; Press once
- 25 - EN 9I03 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe TV/VCR with a soft cloth immersed in luke-warm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/VCR. Such chemicalsmay cause damage and discoloration to theexpo...
Page 26 - TROUBLESHOOTING GUIDE; PROBLEM
- 26 - EN 9I03 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem. PROBLEM CORRECTIVE ACTION No power. • M...
Page 27 - SPECIFICATIONS; GENERAL SPECIFICATIONS; CABLE CHANNEL DESIGNATIONS
- 27 - EN 9I03 SPECIFICATIONS GENERAL SPECIFICATIONS CRT : 13 or 19 inch in-line gun, 90˚deflection tube Television system : NTSC-M Closed caption system :§15.119/FCCVideo Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel T...
Page 28 - CONTROLES DE OPERACIÓN Y SUS FUNCIONES; INDICE
- 28 - ES 0I29 1 Toma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de su videocámara u otravideograbadora. 2 Toma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio,videocámara u otra videograbadora. 3 Botón de la alimentación (POWER)– Pú...
Page 30 - CONEXIONES DE ANTENA/CABLE; ANTENA COMBINADA DE VHF/UHF; CABLE SIN CONVERTIDOR/DESCODIFICADOR
- 30 - ES 0I29 CONEXIONES DE ANTENA/CABLE ANT. IN OUT Antena de varilla UHF/VHF(incluído para solamente 13”) Antena combinada deVHF/UHF(no incluído) Combinador deVHF/UHF(no incluído) Antena UHF(no incluído) Antena VHF(no incluído) Desde el sistema de Cable Cable coaxialde 75 ohm (no incluído) Caja d...
Page 31 - AJUSTE DEL RELOJ
- 31 - ES PREPARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar. NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cablede alimentación.2) Pulse el botón POWER para ence...
Page 32 - Printed in Malaysia; in your own home...; Sears PartsDirect; HomeCentral
Printed in Malaysia 0EMN01907 T5308 / T7308UJ * * * * * FULL 90 DAY WARRANTY For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this TV/VCR combination,free of charge. For one year from the date of purchase, Sears will supply, at no charge, replacement ...
