Page 2 - CAUTION; IMPORTANT SAFEGUARDS
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...
Page 4 - PRECAUTIONS; LOCATION; IMPORTANT COPYRIGHT INFORMATION
AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation....
Page 5 - TABLE OF CONTENTS; A NOTE ABOUT RECYCLING; OPERATING CONTROLS AND FUNCTIONS 7
- 5 - EN 9I03 TABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your ...
Page 7 - OPERATING CONTROLS AND FUNCTIONS
- 7 - EN 9I03 OPERATING CONTROLS AND FUNCTIONS - TV/VCR FRONT PANEL - L button– • Press to select setting modes from the on screenmenu. • Press to enter digits when setting program.(for example: setting clock or timer program) 4 EJECT button [Remote control]– Press in the Stop mode to remove tape fr...
Page 9 - PREPARATION FOR USE; ANTENNA/CABLE CONNECTIONS; VHF/UHF COMBINED ANTENNA; Note to CATV system installer:
- 9 - EN 9I03 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detach-able. Insert the stem of the antenna into the hole onthe upper-back portion of the TV/VCR.Connect theVHF/UHF Rod Antenna or VHF/UHF CombinationAntenna to the ANT. termina...
Page 10 - AUX; MOBILE CONNECTION
- 10 - EN 9I03 INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of thearrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by thepolarity (+/-) markings. 3)Replace the cover. EXTERNAL ...
Page 11 - SET UP FOR USE; CHANNEL SET UP FOR THE; TO SELECT A DESIRED CHANNEL; CLOCK SET UP; AUTO CLOCK SETTING
- 11 - EN 8H30 SET UP FOR USE You can program the tuner to scan all the channelsyou receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellitebox. Just select the TV/VCR channel selector to theoutput channel of the cable box or satellite box (ExCH...
Page 12 - MANUAL CLOCK SETTING; In the example below, the clock is to be set to:
- 12 - EN 8H30 5 Select the year Press the PLAY/ K or STOP/ L but- ton until your desired year appears.(Example: 2001)Then, press the F.FWD/ B button. 6 Select the hour Press the PLAY/ K or STOP/ L but- ton until your desired hour appears.(Example: 5, PM)Then, press the F.FWD/ B button. 7 Select the...
Page 13 - TO CHANGE CLOCK SETTING; SELECTING THE LANGUAGE
- 13 - EN 8H30 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Beg...
Page 14 - TV OPERATION; WATCHING A TV PROGRAM; GAME MODE; TO CANCEL THE GAME MODE
- 14 - EN 8H30 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttonson the remote control. Remember: If the TV/VCR is connecte...
Page 16 - Selection; TV RATING SET UP
- 16 - EN 8H30 3 Select your desired item Press the PLAY/ K or STOP/ L but- ton to point to your desired item.Then, press the F.FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it[BLOCK], the higher rating will turn [BLOCK]automatically. Also, the lower ratin...
Page 17 - MPAA RATING SET UP; PLAYBACK; NORMAL PLAYBACK; INSERTING A CASSETTE; This TV/VCR will operate with any cassette that has the
- 17 - EN 8H30 4 Exit the V-Chip setting mode Press the MENU button on the remote control toreturn to original mode. MPAA RATING SET UP Make sure ... • TV/VCR power must be turned on. 1 Select “V-CHIP SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point t...
Page 18 - PICTURE SEARCH; SEARCH; ZERO RETURN; WILL NOT; TIME SEARCH; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 18 - EN 8H30 PICTURE SEARCH This feature is very useful in finding or skipping overa particular scene on a tape. In this mode, the soundwill be muted.1)You may view a video tape at a high speed in either a forward or reverse direction by pressingthe F.FWD or REW button during playback (in theSP / ...
Page 19 - In the example below:; TO CANCEL THE RENTAL MODE; RENTAL PLAYBACK; INDEX SEARCH; SLOW MOTION
- 19 - EN 8H30 NOTES: • Time Search can be set up to a maximum of 9hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, ineither direction. 1 Insert a ...
Page 20 - RECORDING; ERASE PREVENTION; Tape Speed; NORMAL RECORDING
- 20 - EN 8H30 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tabin place. (If necessary, rewind or fast forward thetape to the point at which you want to beginrecording.) NOTE: This unit will ONLY record and view the same channel. RECORDING ERASE PREVE...
Page 21 - TIMER RECORDING; In the example below, the timer is being set to record:; Display
- 21 - EN 8H30 AAvoid overlap of programs ... There is a chance that a program will not be record-ed. When programs overlap: • The program with the earliest start time will recordfirst. • Once the earliest program finishes recording, theoverlapping programs will record in the order ofthe program num...
Page 22 - PM; program using the PLAY/; TO CORRECT A PROGRAM; While setting a program; )Press the POWER button to set automatic timer; TIMER PROGRAM EXTENSION
- 22 - EN 8H30 For every day recording : To record a TV program at the sametime on the same channel everyday. (Example: Monday throughSunday) Press the STOP/ L (down) but- ton until “EVRY DAY” appears. Then, press theF.FWD/ B button. For weekly recording : To record a TV program at the same time on ...
Page 23 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; WAKE UP TIMER; Use the remote control for this procedure.
- 23 - EN 8H30 TO CANCEL AN AUTOMATIC TIMERRECORDING • After setting a program; 1)Press the POWER button.2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want tocancel. 3)Press the T-PROG. CLEAR button.4)Press the MENU button on the remote control to return to TV m...
Page 24 - TO CANCEL THE WAKE UP TIMER; TO CANCEL THE SLEEP TIMER; COPYING A VIDEO TAPE
- 24 - EN 8H30 2 Select “TV” or “TAPE” Press the PLAY/ K or STOP/ L but- ton until it points to “TV/TAPE”.Press the F.FWD/ B or REW/ s button, and select [TV] or [TAPE]. 3 Set wake up time Press the PLAY/ K or STOP/ L but- ton until it points to “TIME”.Press the F.FWD/ B or REW/ s button until your ...
Page 25 - MAINTENANCE; chase a good quality VHS Video Head Cleaner.; SERVICING; ON SCREEN DISPLAY; WHEN THE CLOSED CAPTION MODE IS OFF:; The On Screen Display disappears after 5 seconds.; OFF mode; SPECIAL FEATURES; REAL TIME TAPE COUNTER
- 25 - EN 8H30 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe TV/VCR with a soft cloth immersed in luke-warm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/VCR. Such chemicalsmay cause damage and discoloration to theexpo...
Page 26 - TROUBLESHOOTING GUIDE; PROBLEM
- 26 - EN 8H30 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem. PROBLEM CORRECTIVE ACTION No power. • M...
Page 27 - SPECIFICATIONS; GENERAL SPECIFICATIONS; CABLE CHANNEL DESIGNATIONS
- 27 - EN 8H30 SPECIFICATIONS GENERAL SPECIFICATIONS CRT : 13 inch in-line gun, 90˚deflection tube Television system : NTSC-M Closed caption system :§15.119/FCCVideo Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF ...
Page 28 - CONTROLES DE OPERACIÓN Y SUS FUNCIONES; INDICE
- 28 - ES 0I29 1 Toma de auriculares (EARPHONE)– Para conec- tar los auriculares (no suministrados) y escuchar en pri-vado. La toma es mono y tiene un tamaño de 3,5 mm. 2 Toma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio,videocámara u otra videograbadora....
Page 29 - Pulselo para
- 29 - ES 0I29 ANT. AC 120V DC 13.2V 28 26 27 • Púlselo para introducir dígitos cuando establezca un programa.(Por ejemplo: Para ajustar el reloj o establecer un pro-grama de temporizador) 7 Botón de avance rápido (F.FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen enavance rápi...
Page 30 - CONEXIONES DE ANTENA/CABLE; ANTENA COMBINADA DE VHF/UHF; CONEXION MOVIL
- 30 - ES 0I29 CONEXIONES DE ANTENA/CABLE ANT. IN OUT ANT. DC 13.2V AC 120V Antena de varilla UHF/VHF(incluído) Antena combinada deVHF/UHF(no incluído) Combinador deVHF/UHF(no incluído) Antena UHF(no incluído) Antena VHF(no incluído) Desde el sistema de Cable Cable coaxialde 75 ohm (no incluído) Caj...
Page 31 - AJUSTE DEL RELOJ
- 31 - ES PREPARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar. NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cablede alimentación.2) Pulse el botón POWER para ence...
