Page 2 - Table of Contents; Before Using; CHANNEL; Indice; Guía rápida en español; Back Cover
2 EN 1A23 Table of Contents 1 Before Using . . . . . . . . . . . . . . . . . 3 Important Safeguards . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . . . . . . . . . . . . . 5 Information on digital broadcasting . . . . 6 Major features of STB . . . . . . . . . . . . . . 7 Location of ...
Page 3 - RISK OF ELECTRIC SHOCK; IMPORTANT SAFEGUARDS
3 EN 1A23 1 Bef ore Using 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the op...
Page 5 - IMPORTANT COPYRIGHT INFORMATION; Precautions
5 EN 1A23 Before Using 1 Bef ore Using This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equ...
Page 6 - Before Using; ATSC; Receives ATSC; TV; Information on digital broadcasting
6 EN 1A23 Before Using Digital broadcasting is the most advanced format of broadcasting, employing a new technology forcompression of audio and video signals which allows broadcasters to transmit digital signals using existingterrestrial systems.Due to this dramatic progress, new features of broadca...
Page 7 - Capable of receiving Dolby Digital* 5.1 audio; Major features of STB
7 EN 1A23 Before Using 1 Bef ore Using • Capable of receiving digital (ATSC*) broadcasts • Capable of receiving High Definition TV (HDTV*) or Standard Definition TV (SDTV*) broadcasts • Capable of receiving Dolby Digital* 5.1 audio • Digital audio output through optical or coaxial jack • Alternative...
Page 8 - Location of controls; FRONT PANEL; Navigation buttons
8 EN 1A23 Before Using REMOTE CONTROL 6 78 9 10 11 2 34 5 1 Location of controls P O W E R C H A N N E L FRONT PANEL 1 2 4 3 1 POWER button: Turns STB on and off. 2 Number buttons: Input channel numbers, passwords and to set time. 3 ENTER button: In SETUP menu, press to enter your selection. 4 CH o ...
Page 9 - 2 AUDIO OUT jacks; Connect your TV, stereo system or VCR to with standard audio cables.; NOTE for audio output:; REAR PANEL
9 EN 1A23 Before Using 1 Bef ore Using 1 ANT. IN jack: Connect an antenna. 2 ANT. CTL jack: Connect the control cord of the smart antenna. Not for phone jack. 3 DVI-D HDCP OUT jack: Use this connection or the COMP.OUT jacks to enjoy HDTV. Connect a television that conforms to EIA-861 and HDCP. Some ...
Page 10 - A NOTE ABOUT RECYCLING; Check the following accessories when unpacking the STB:; Unsnap the battery cover from the back; When replacing batteries, replace them in pairs.; Snap the battery cover back.; Installing batteries; Remote control: NE144UD; Accessories
10 EN 1A23 Before Using A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your local re...
Page 11 - Refer to pages 14-21 to connect to your audiovisual equipment.; Rear panel of STB; Connecting the Smart Antenna; CAUTION; Wrong
11 EN 1A23 Antenna Connections 2 Antenna Connections Before connecting, ensure the AC power cord is NOT connected to the AC outlet.To connect the Smart Antenna, refer to your Smart Antenna’s manual for details. 1 Use a 75 ohm coaxial antenna cable to connect the Smart Antenna to the TO ANTENNA jack ...
Page 12 - Antenna Connections; WHEN CONNECTING TO CABLE BOX ALSO:; CABLE BOX; Connecting a different antenna; Refer to your television’s manual for details.; Note to the Cable TV System
12 EN 1A23 Antenna Connections D . A U D I O O U T C O A X . L P b P r L R 1 2 Y C V B S O U T C O M P. O U T A N T. C T L D . A U D I O O U T D V I C O M P. DV I - D H D C P O U T O P T S - V I D E O O U T R E S O L U T I O N S E L E C T 1 0 8 0 i / 7 2 0 p / 4 8 0 p A N T. I N A U D I O O U T D . ...
Page 14 - TV/Monitor Connections; When changing connections, turn all devices off.; Position of RESOLUTION SELECT switch; Select 1080i if your television can show 1080i resolution video.; TV resolution; STB connection using DVI-D HDCP OUT jack to HDTV
14 EN 1A23 TV/Monitor Connections There are various ways of connecting the STB to a TV or monitor. Connect according to your equipment andscreen format. The following pages show some sample connections. • Choose one type of video connection (unless you also want to connect a recording device). • Whe...
Page 15 - Connection to a TV or monitor; Connections; Plug the AC power cord of the STB into the AC outlet and turn it on.
15 EN 1A23 TV/Monitor Connections Connection to a TV or monitor 3 TV/Monitor Connections 1 Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish). 2 Use a DVI (DVI-D) video cable to connect the DVI-D HDCP OUT jack on the STB to the DVI input j...
Page 16 - STB connection using COMP. OUT jacks to HDTV
16 EN 1A23 TV/Monitor Connections D . A U D I O O U T C O A X . L P b P r L R 1 2 Y C V B S O U T C O M P. O U T A N T. C T L D . A U D I O O U T D V I C O M P. DV I - D H D C P O U T O P T S - V I D E O O U T R E S O L U T I O N S E L E C T 1 0 8 0 i / 7 2 0 p / 4 8 0 p A N T. I N A U D I O O U T R...
Page 18 - OR; Or; Video cable; STB connection using S-VIDEO OUT or CVBS OUT (Composite) jack to SDTV
18 EN 1A23 TV/Monitor Connections 1 Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish). 2 Use an S-video cable to connect the S-VIDEO OUT jack on STB to an S-video input jack on the TV. OR Use a standard video cable to connect the CVBS OUT...
Page 19 - Plug the AC power cord of STB into an AC outlet and turn it on.; Digital Decoder; STB connection to a decoder with Dolby Digital
19 EN 1A23 Other Connections 4 Other Connections There are various ways of connecting the STB to an audio device or video device. Connect according to yourequipment. The following pages show some sample connections. • Choose one type of audio connection (unless you also want to connect a recording d...
Page 20 - Other Connections; Plug the AC power cord of STB into the AC outlet and turn it on.; STEREO COMPONENT; STB connection to a standard stereo system
20 EN 1A23 Other Connections 1 Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish). 2 Refer to “TV/Monitor Connections” to connect STB and the TV with a video cable. 3 Use a standard audio cable to connect the AUDIO OUT jacks (L, R) on the ...
Page 21 - VCR; Audio cable
21 EN 1A23 Other Connections 4 Other Connections D . A U D I O O U T C O A X . L P b P r L R 1 2 Y C V B S O U T C O M P. O U T A N T. C T L D . A U D I O O U T D V I C O M P. DV I - D H D C P O U T O P T S - V I D E O O U T R E S O L U T I O N S E L E C T 1 0 8 0 i / 7 2 0 p / 4 8 0 p A N T. I N A ...
Page 22 - buttons after Initial Setup.; Initial setup; Number buttons; ENTER
SETUP WIZARD The SETUP WIZARD is a convenient way for you tocustomize the settings of STB. When STB is turned on for the first time afterconnecting the AC power cord, SETUP WIZARD isdisplayed on the screen automatically. You cancomplete the following items for the Initial Setupsthrough this menu. • ...
Page 23 - Select ON or OFF for Daylight Saving; See “INFORMATION on Time Zones ” on pages 44-45.; When going back and forth, press navigation buttons; Initial Setups
• To get many more digital channels from your SmartAntenna, do the EXTENDED SCAN when youhave completed the SETUP WIZARD.See “Receiving channels” on page 39 for details. 6 SETUP WIZARD 3/8 appears. 7 Select ON or OFF for Daylight Saving Time (DST) using navigation buttons s s / B B , then press ENTE...
Page 24 - See “Selecting screen formats” on page 41 for details.
• When the STB has finished gathering the timeinformation, the current date and time according to thechannel appears. • “No time info.” appears if the STB could not find timeinformation from the channel you selected. 12 If this information shown is satisfactory, use the navigation buttons o o / p p ...
Page 25 - buttons and number buttons on the remote; Turn the TV on and select the input to; When using CH; Press CH; POWER; Watching TV
25 EN 1A23 Basic Operation 6 Basic Operation STB can receive digital (ATSC format) broadcasts.Tune to the available digital channels with the CH o / p buttons and number buttons on the remote control.Each channel number consists of a main channelnumber and a sub-channel number. 1 Turn the TV on and ...
Page 26 - The STB returns to the channel you were last watching.; on your remote control.; Basic Operation
2. Press ENTER. • STB tunes in channel 26-1 and the program beingbroadcast appears. To select only with a main channel number(E.g., 55 ): • X appears momentarily as an alternate sub-channel, then STB receives the sub-channel withthe smallest sub-channel number. To return to the channel you were last...
Page 27 - Press INFO to display the channel; Channel information appears in the channel banner.; Press INFO to clear.; INFO; Channel banner
The channel banner provides you with informationon the channel you have selected. 1 Press INFO to display the channel banner. • Channel information appears in the channel banner. Screen: Remote: 2 Press INFO to clear. 26-1 Puffy the Vampire Slayer WWOR TV-Y 2:00PM- 3:00PM Doublement Palace: Puffy ta...
Page 28 - Information icons; Components of Channel Banner
28 EN 1A23 Basic Operation Information icons DTV: Indicates that you are tuning in a digital channel. HD (High Definition): Indicates that the program being broadcast has a high definition signal with screen ratio 16:9. SD (Standard Definition): Indicates that the program being broadcast has standar...
Page 29 - The sequence repeats according to the audio-map.; First Language; Choosing audio and language; AUDIO
29 EN 1A23 Basic Operation 6 Basic Operation You can change languages through an audio-mapwhen the channel provides alternate languages. Audio map: Languages from a station are stored in an audio-map.For example, when three languages are available, thesequence below repeats and the desired language ...
Page 30 - The program’s audio continues.; Press any button to quit.; The picture currently being broadcast appears.; STILL; Picture Still
You can stop the picture on the screen anytime bypressing STILL o button. 1 Press STILL o o button while watching TV. • STILL is indicated on the lower left while the picture isdisplayed. Screen: Remote: The program’s audio continues. 2 Press any button to quit. • The picture currently being broadca...
Page 31 - RESTRICTED PROGRAM; On screen messages
Some messages are displayed on the screen duringchannel changing or during programs. When STB cannot receive a channel signal, thewhole screen becomes gray, then NO SIGNALappears in the center.This may occur when: • the signal is too weak(when using the Smart Antenna, it automaticallysearches for th...
Page 32 - To go back to the previous page:; Press navigation button; When you select a program being broadcast:; Advanced Operation
Electronic Program Guide (EPG) is an application fordigital channels that lists current and scheduledprograms that are or will be available on eachchannel and a short summary or commentary foreach program. EPG is the electronic equivalent of a printedtelevision program guide.You can view a list of p...
Page 33 - Components of Electronic Program Guide (EPG)
33 EN 1A23 Advanced Operation 7 Ad v anced Operation To clear the EPG: Press EPG or PREVIOUS.The previous program appears. Screen: Remote: 26-2 Gilmore Girls ENGLISH WPIX or Information icons LOCK: Indicates that the current program is blocked according to your V-CHIP setting. CC (Closed Caption): I...
Page 34 - Setup menu options
34 EN 1A23 Advanced Operation includes: • ADD / DELETE: Add or delete channels in the channel map. • ANTENNA: Verify and adjust the signal strength of each channel to get a clearer picture. • AUTOSCAN: Get available digital channels automatically into the channel map by completing AUTOSCAN or EXTEND...
Page 35 - Add or delete desired channels in the channel map.; Press SETUP to display SETUP menu.; CHANNEL menu appears.; Select ADD/ DELETE using navigation; SETUP; Adding/Deleting channels
Add or delete desired channels in the channel map. NOTE : Once you add (or delete) channels in a channel map,you can select (or skip) the channels in order usingCH o / p buttons. 1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select CHANNEL using navigation buttons o o / p p , then press ENT...
Page 36 - Adding channels; Enter channel number 26.; 6 is added to the channel map.; Deleting channels; Select DELETE using navigation; The cursor moves to the channel map.; Select the digital channel number 26; 6-1 is indicated in the box at the top of the screen.; Press ENTER when the cursor is on the; The digital channel number 26 will be deleted.; To continue deleting:; Press SETUP to exit SETUP menu.
Adding channels E.g., deleting channel 26. 4 Enter channel number 26. 5 Select ADD using navigation buttons o o / p p , then press ENTER. • 26 is added to the channel map. NOTE: Channels can be added only with main channelnumbers. When the channel has sub-channels,however, you can select the sub-cha...
Page 37 - Channel map; Information on channel map
ADD/DELETE QUIT CHANNEL DISPLAY CLOCK DETAIL 26-1 ADD DELETE 26 23 22 13 Channel map : Indicates a digital channel. Information on channel map 37 EN 1A23 Advanced Operation 7 Ad v anced Operation ST300UA.qxd 04.8.3 1:12 PM Page 37
Page 38 - Select ANTENNA using navigation; ANTENNA; Adjusting antenna
You can verify the signal strength of each channel toget a clearer picture. E.g., to adjust channel 26-1. 1 Select channel 26-1 to adjust using number buttons or CH o o / p p buttons. Remote: Screen: 2 Press SETUP to display SETUP menu. 3 Select CHANNEL using navigation buttons o o / p p , then pres...
Page 39 - Adjust the Smart Antenna’s height (or; To adjust other channels:; Select the channel with CH; To cancel during adjustment:; Press SETUP or ENTER.; STB can get available digital channels automatically.; AUTOSCAN; Receiving channels
5 Adjust the Smart Antenna’s height (or direction if you are using an ordinaryantenna) to get the best reception. • A status bar stretches to the right according to thesignal strength. • The value will be indicated on the left of the status barso that you can adjust the antenna. NOTE : Once you have...
Page 40 - Select AUTOSCAN using navigation; AUTOSCAN menu appears.; Select AUTOSCAN or EXTENDED; To cancel during scanning:; AUTOSCAN CANCELLED appears on the screen.; When NO SIGNAL appears on the screen:
1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select CHANNEL using navigation buttons o o / p p , then press ENTER. • CHANNEL menu appears. 3 Select AUTOSCAN using navigation buttons o o / p p , then press ENTER. • AUTOSCAN menu appears. 4 Select AUTOSCAN or EXTENDED SCAN using navigation b...
Page 41 - DISPLAY menu appears.; SCREEN RATIO; Selecting screen formats
STB allows you to select a screen ratio and a displaymode (aspect ratio) to match the formats of theprogram being broadcast on your TV screen.You can also change to aspect ratios you prefer towatch. There are two screen ratios used in manufacturingTVs. These are standard TV format (4:3) andwidescree...
Page 42 - STB; STB; DISPLAY MODE
1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DISPLAY using navigation buttons o o / p p , then press ENTER. • DISPLAY menu appears. 3 Select DISPLAY MODE using navigation buttons o o / p p , then press ENTER. • Display mode options appear. 4 Select the desired display mode using nav...
Page 44 - Daylight saving time setting menu appears.; Select ON or OFF using navigation; Setting the clock
To get the EPG (Electronic Program Guide) andChannel banner, you will need to set the CLOCKcorrectly. NOTE: The clock function is necessary to display the EPGso there may be 10 seconds-time lag a day at themaximum. Therefore we recommend settingAUTO to ON. Set Daylight Saving Time (DST) and TIME ZON...
Page 46 - Adjusting the clock
STB can adjust the clock automatically using clockdata included in digital broadcasts. In this menu, STB searches for channels with clockdata, then adjusts the clock using the channel youselect. 1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select CLOCK using navigation buttons o o / p p , ...
Page 47 - Setting a new password
5 Use the navigation buttons o o / p p to select the channel you want to gatherclock data from in the channel map,then press ENTER. • The time info window appears and the STB startssearching for the time info on the channel you selected. TIP: • You can select a channel that has been found even ifthe...
Page 48 - Select DETAIL using navigation button; ” appears for each digit.
1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DETAIL using navigation button o o / p p , then press ENTER. • DETAIL menu appears. 3 Select V-CHIP/CC using navigation button o o / p p , then press ENTER. • V-CHIP/CC password window appears. 4 Enter the default password “0000.” • “ ” a...
Page 50 - buttons; If you choose “STB” to control V-CHIP Ratings:
50 EN 1A23 Advanced Operation 5 Select V-CHIP/CC using navigation buttons o o / p p , then press ENTER. • V-CHIP/CC setting menu appears. 6 Select STB or TV using navigation buttons s s / B B , then press ENTER. NOTE: To set V-CHIP/CC settings, choose STB. If you choose “STB” to control V-CHIP Ratin...
Page 51 - Age Label; Description; PG; MPAA RATING; Setting MPAA rating
51 EN 1A23 Advanced Operation 7 Ad v anced Operation The MPAA (Motion Picture Association of America)uses the standard movie ratings. Number buttons ENTER Navigation buttons / SETUP Age Label NR Not Rated by MPAA Description G General Audience PG Parental Guidance Suggested. Some material may not be...
Page 52 - Select DETAIL using navigation buttons
1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DETAIL using navigation buttons o o / p p , then press ENTER. • DETAIL menu appears. 3 Select V-CHIP/CC using navigation buttons o o / p p , then press ENTER. • V-CHIP/CC password window appears. 4 Enter your 4-digit password. • “ ” appea...
Page 53 - Setting TV rating
(TV Parental Guidelines)TV rating allows parents to block out programs theydon’t want their children to see.TV rating consists of age labels and content labels. The following are the descriptions for each label: NOTE: When you block a particular rating or content label,all categories above that are ...
Page 54 - Select TV RATING using navigation; TV rating setting menu appears.; Content labels; INFORMATION on TV ratings
1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DETAIL using navigation buttons o o / p p , then press ENTER. • DETAIL menu appears. 3 Select V-CHIP/CC using navigation buttons o o / p p , then press ENTER. • V-CHIP/CC password window appears. 4 Enter your 4-digit password. • “ ” appea...
Page 55 - Select TV-14 using navigation buttons
55 EN 1A23 Advanced Operation 7 Ad v anced Operation To set age-based ratings: E.g., to block all TV-14 programs 1. Select TV-14 using navigation buttons o / p , then press ENTER. • Lock indicators are added to TV-14 and above. Screen: Remote: NOTE: All TV-14 and higher programs are blocked, alongwi...
Page 56 - CLOSED CAPTION; Closed caption options
Closed captions are text versions of the audio contentor may provide other information while you arewatching a program. Actual content is decided by thebroadcaster.This menu contains the following items. CLOSED CAPTION: OFF: Select if you do not want closed captions. This is the default. CC1 to CC4 ...
Page 58 - Select if you do not want DTV CC. This is; SERVICE 1 to SERVICE 6:; Select one of these
9 Select the setting you want for DTV CC using navigation buttons o o / p p , then press ENTER. • CLOSED CAPTION menu appears. • Your selection is activated. NOTE: DTV CC: Apart from closed captions, DTV has its own closedcaptions called DTV CC. Use this menu to changethe settings for DTV CC. OFF: S...
Page 60 - ENGLISH is the default.; Language menu appears.; MENU LANGUAGE; Choosing the screen language
Choose English, French or Spanish for the screenmenu. NOTE: ENGLISH is the default. 1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DETAIL using navigation buttons o o / p p , then press ENTER. • DETAIL menu appears. 3 Select MENU LANGUAGE using navigation buttons o o / p p , then pres...
Page 61 - Sound effects are only when using on screen menu.; SOUND EFFECTS; Choosing sound effects
Choose whether to have sounds on or off when usingon screen menus. 1 Press SETUP to display SETUP menu. Screen: Remote: 2 Select DETAIL using navigation buttons o o / p p , then press ENTER. • DETAIL menu appears. 3 Select SOUND EFFECTS using navigation buttons o o / p p , then press ENTER to switch...
Page 62 - Others; Troubleshooting
62 EN 1A23 Others Symptom Remedy • Make sure that the AC power cord is securely plugged into the power outlet.• Make sure that STB is turned on. • Make sure to point the remote control unit at the remote control sensor.• You may be too far from STB. Try moving closer.• Remove any obstacles between t...
Page 63 - No reception
63 EN 1A23 Others 8 Other s • Make sure to complete AUTOSCAN in SETUP WIZARD or EXTENDED SCAN in SETUP menu. It will be required when you setup STB for the first time or when STB is moved to a location where other channels are broadcast. • The selected channel does not exist at that time. There are ...
Page 64 - STB for ATSC; ANT IN; Advanced Television Systems Committee:; Glossary and Acronyms
Product STB for ATSC Connecting Jacks ANT IN F connector (75 ohm) Smart ANT. Control 1-ANT Control jack Video Output (component) 3-pin jacks (Y, Pb, Pr) S-Video Output Mini DIN 4-pin jack (75 ohm) Video Output 1-pin jack, 1Vpp Digital Video Output 1-DVI-D HDCP jack Analog Audio Output 2-pin jacks (L...
Page 66 - Guía rápida en español; Abra la cubierta de pilas de la parte trasera del; PANEL TRASERO; PANEL FRONTAL; Ubicación del control
66 ES 1A23 Guía rápida en español 1 Botón POWER: Conecta y desconecta el STB. 2 Botones numéricos: Entre los números de canal, con- traseñas y para ajustar la hora. 3 Botón ENTER: En el menú SETUP, presione para entrar su selección. 4 Botones CH o o / p p : Cambie los canales hacia arriba o abajo. 5...
Page 67 - Conexión STB utilizando la toma; Conexión a una antena inteligente; Conexión de la antena inteligente
67 ES 1A23 9 Guía rápida en español Guía rápida en español Antes de conectar, asegúrese que el cable eléctrico de CA NO estáconectado al tomacorriente de CA.Para conectar la antena inteligente, para más detalles consulte sumanual de antena inteligente. 1 Utilice un cable de antena coaxial de 75 ohmi...
Page 68 - Conexión STB a un; Conexión STB utilizando la toma S-VIDEO; Conexión STB utilizando las
68 ES 1A23 Guía rápida en español 1 Consulte las “Conexiones de Antena” para conectar el STB a laantena inteligente (o una diferente si lo prefiere). 2 Utilice cables de video componente para conectar las tomasCOMP. OUT (Y/Pb/Pr) en el STB a las tomas de entrada devideo componente en su televisor. 3...
Page 69 - ASISTENTE DE AJUSTES; Conecte la alimentación del STB utilizando el POWER; Ajuste inicial; Conexión STB al TV y equipos de; Conexión STB a un sistema
69 ES 1A23 9 Guía rápida en español Guía rápida en español 1 Consulte las “Conexiones de Antena” para conectar el STB a laantena inteligente (o una diferente si lo prefiere). 2 Consulte las “Conexiones de TV/Monitor” para conectar elSTB y el TV con un cable de video. 3 Utilice un cable de audio norm...
Page 70 - utilizando los botones de navegación
70 ES 1A23 Guía rápida en español 6 Aparece ASISTENTE DE PREP. 3/8. 7 Seleccione ON u OFF para la hora de verano. (DST) utilizando los botones de navegación s s / B B y presione ENTER. • Aparece ASISTENTE DE PREP. 4/8. 8 Seleccione su huso horario con los botones de navegación o o / p p / s s / B B ...
Page 72 - Printed in China; LIMITED WARRANTY; workmanship as follows:; LIMITS AND EXCLUSIONS:; PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China ST300UA 0EMN02517 ***** LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year...
