Sunrise Medical Zippie GS - Manual

Sunrise Medical Zippie GS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – S U N R I S E L I S T E N S; TABLE OF CONTENTS
Page 3 – Drive Shaft Assembly; O N E - A R M D R I V E; Quickie TS
Page 4 – b. Insert alignment tool or axle with key; C. ASSEMBLING COMPONENTS; a. Mount handrim hub to handrim on dual; I V . A S S E M B L Y
Page 5 – BALANCE
Page 6 – Quickie IRIS; On Zippie GS, drive shaft assembly may be; MOUNTING SIDES
Page 7 – 477 East Dry Creek Parkway • Longmont, Colorado • 80503 USA

Loading the manual

User

Instruction

Manual

One-Arm Drive Option

Supplement to Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS, Breezy Series

Note:

This supplement contains information on the

assembly and adjustments for the One-Arm Drive
Components of a Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS & Breezy Series wheelchairs
ONLY.
Please refer to the Quickie 2, Quickie TS, Quickie IRIS,
Zippie 2, Zippie GS, or Breezy Series User Instruction
Manual for Safety Tips, Troubleshooting, Maintenance,
Tool List, Accessories, Warranty, etc.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - S U N R I S E L I S T E N S; TABLE OF CONTENTS

930331 Rev. F 930331 Rev. F 2 3 SUNRISE LISTENS Thank you for choosing the One-Arm Drive Option. We want to hear your questions or comments about this manual and the service you receive from your supplier. Please feel free to write or call us at the address and telephonenumber below: Sunrise Medical...

Page 3 - Drive Shaft Assembly; O N E - A R M D R I V E; Quickie TS

930331 Rev. F 5 930331 Rev. F 4 I V . A S S E M B L Y I I I . S P E C I F I C A T I O N S A N D F E A T U R E S A. INSTALLING AXLES 1. Installation a. Mount axle plates on each side of the chair Breezy 500 & 510 (Fig. 1), Breezy 600 & Quickie LXI (Fig. 2), Zippie GS (Fig. 1a), Breezy (Fig. 3...

Page 4 - b. Insert alignment tool or axle with key; C. ASSEMBLING COMPONENTS; a. Mount handrim hub to handrim on dual; I V . A S S E M B L Y

930331 Rev. F 7 930331 Rev. F 6 2. Opposite Side Assembly (Fig. 8) a. Add one washer (5a) to axle (1).b. Insert axle with washer through bearings in axle plate. c. Add spacer (2) to axle.d. Add wheel (4) to axle.e. Insert key (3) into keyway on axle (1).f. Add washer (5b) and nut (6). g. Tighten. 3....