Summit Appliance FFBF249SS2LHD - User Manual

5 LOCATION OF PARTS A: Refrigerator 1. Control light 2. LED lighting 3. Multiflow column 4. Glass shelves 5. FreshZone drawer 6. CrispZone fruit and vegetables drawer with humidity control 7. Bottom door shelves 8. Bottle shelves B: Freezer 9. Top freezing and storage drawer 10. Deep SpaceBox drawer...

6 INSTALLATION INSTRUCTIONS Locating your Appliance • Install the appliance in a dry and well ventilated room. The appliance will operate correctly if the environment temperature is in the interval specified in the table. The appliance class is indicated on the rating label with the basic informatio...

7 • Appliance installation should be carried out by at least two people to avoid any personal injury or damage to the appliance. • The appliance must stand level or tilted slightly to the back. It should be stable and placed a solid base. At the front, the appliance is fitted with two adjustable fee...

12 OPERATING YOUR APPLIANCE Control Panel Turning the Appliance On/Off When you connect the appliance to the main power source for the first time, the appliance will be in standby mode (switched off, but powered). • To switch on the appliance, press the (A) key. A The appliance will beep, and the te...

13 Adjusting the Temperature in the Appliance • The appliance temperature is preset at the factory to the recommended setting, i.e. 40 °F for the refrigerator compartment and 0 °F for the freezer compartment. • After the appliance is switched on, it may take several hours for the set temperature to ...

14 Intensive Freezing Use this setting after switching on the appliance for the first time, before cleaning, or before inserting a large amount of food. • To activate the intensive freezing function, press the C key. You will hear a beep, indicators B1 and C1 will light up. • After 30 seconds, the d...

16 High Temperature Alarm • If the temperature inside the appliance is too high, then an acoustic alarm will be activated (intermittent tone). • HI will flash on the B3 display unit, and the symbol for the part of the appliance where the temperature is too high (B1 or B2) will be lit. • Every time y...

17 Power Supply Alarm If the temperature in the appliance reached the alarm level during the power outage, then the high temperature alarm will be activated when power supply is restored. Acoustic alarm will be sounded, and PF will flash on the display unit B3. To acknowledge and turn off the acoust...

19 FreshZone Drawer In the FreshZone compartment, food stays fresh longer than in a conventional refrigerator, retaining more flavor and nutrients. Decay and loss of mass are slowed down; therefore, fruit and vegetables remain fresh and natural longer. For optimum performance, the drawer should be f...

20 STORAGE TIPS • Correct use of the appliance, appropriate packaging, maintaining the right temperature, and observing the food hygiene standards have a decisive impact on the quality of food storage. • Observe the expiry dates for the food, indicated on the packaging. • Food stored in the refriger...

21 CLEANING AND CARE CAUTION: Before cleaning, unplug the appliance from the power mains – switch off the appliance (see chapter Switching the Appliance On/Off) and unplug the power cord from the wall outlet. • Use a soft cloth to clean all surfaces. Cleaners that contain abrasive substances, acids,...

22 TROUBLESHOOTING Many common freezer problems can be solved easily, without incurring the cost of a service call. Listed below are several possible causes for common problems. Problem: Cause or remedy: Appliance is connected to the power mains but it does not work. Make sure there is voltage in th...

24 LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory -specified parts and repair...