Star Micronics TUP942 - Manual
Star Micronics TUP942 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Connecting the Power Adapter:
- Page 8 – Driver Installation
- Page 15 – Troubleshooting
- Page 17 – CHAPTER 6 OPERATION SPECIFICATIONS; Operation Panel Specifications; Control Panel Specifications:
- Page 19 – Identify Error Conditions:
- Page 23 – Printing a Self Test Page:
- Page 26 – Specifications
- Page 28 – Maintenance
- Page 32 – Status Monitor Setup
1
Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088371
Date: 12/3/2007
TUP900
Revision 1.2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Assembly – Installing the Interface Place the interface sub-assembly into the interface slot as shown. Take care to be sure the interface cartridge is seated properly into its connector. Using a #2 Phillips screwdriver, install the mounting screws included with the printer. Interface Type… Parallel ...
8 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088374 Date: 12/3/2007 Driver Installation
15 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 0883711 Date: 12/3/2007 Troubleshooting
