Sony DCR-TRV5E - User Manual

5 Before you begin Перед началом эксплуатации [a] [b] Precautions on camcorder care • The LCD screen and/or the colour viewfinderare manufactured using high-precisiontechnology. However, there may be sometiny black points and/or bright points (red,blue or green in colour) that constantlyappear on th...

7 Getting started Подготовка к эксплуатации CHARGE 1 2 3 Before using your camcorder, you first need tocharge and install the battery pack. To charge thebattery pack, use the supplied AC poweradaptor.This camcorder operates only with the“InfoLITHIUM” battery pack. “InfoLITHIUM” is a trademark of Son...

8 Charging time Battery pack Charging time * NP-F330 (supplied) 130 (70) NP-F550 180 (120) NP-F530 170 (110) The time required for a normal charge isindicated in parentheses.* Approximate minutes to charge an empty battery pack using the supplied AC poweradaptor. (Lower temperatures require a longer...

9 Getting started Подготовка к эксплуатации Charging and installing thebattery pack Notes on remaining battery time indicationduring recording • Remaining battery time is displayed in the viewfinder or on the LCD screen. However, theindication may not be displayed properly,depending on using conditi...

10 Charging and installing thebattery pack Installing the battery pack ( 1 ) Set the POWER switch to OFF to preventmisoperation of the camcorder. ( 2 ) To open the lid of the battery compartment,slide the OPEN (BATT) release lever. ( 3 ) Insert the battery pack in the direction of thearrow. ( 4 ) Cl...

11 Getting started Подготовка к эксплуатации 1 2 3 PUSH You can use mini DV cassette with logo* only.Make sure that the power source is installed. ( 1 ) While pressing the small blue button on theEJECT switch, slide it in the direction of thearrow. The cassette lid and compartmentopen. ( 2 ) Insert ...

12 3 2 –: – –: – – STBY 0:00:00 REC 40min 60min VTR CAMERA OFF POWER VTR CAMERA OFF POWER 1 Basic operations Camera recording Make sure that the power source is installed anda cassette is inserted and that the START/STOPMODE switch (p. 17) is set to . Before you record one-time events, you may want ...

13 Basic operations Основные операции To stop recording momentarily [a] Press START/STOP. The “STBY” indicatorappears in the viewfinder (Standby mode) . To finish recording [b] Press START/STOP again to stop recording. Setthe POWER switch to OFF. Then, eject thecassette and remove the battery pack. ...

14 Camera recording Note on Recording mode This camcorder records and plays back in SP(standard play) mode and in LP (long play)mode. Select SP or LP in the menu system. In LPmode, you can record 1.5 times as long as in SPmode. Notes on LP mode •We recommend to use this camcorder to play back a tape...

15 Basic operations Основные операции Camera recording T W W T W T Note on remaining tape indicator The indicator may not be displayed accuratelydepending on the tape. Though the indicatordoes not appear at the time of recording, it willappear in a few seconds. Using the zoom feature Zooming is a re...

16 Camera recording Notes on digital zoom • More than 10x zoom is performed digitally, and the picture quality deteriorates as you gotoward the “T” side. If you do not want to usethe digital zoom, set the D ZOOM function toOFF in the menu system. • The right side [ a ] of the power zoom indicator sh...

17 Basic operations Основные операции VTR CAMERA OFF POWER 2 0:00:04 REC 0:00:00 REC 1 5SEC ANTI GROUND SHOOTING START/STOP MODE Camera recording Selecting the start/stop mode Your camcorder has two modes besides normalstart/stop mode. These modes enable you to takea series of quick shots resulting ...

18 To extend the recording time in 5SECmode Press START/STOP again before all the dotsdisappear. Recording continues for about 5seconds from the moment you press START/STOP. Note on 5SEC recording If you have turned off the indicators on the LCDscreen, the dots do not appear. Shooting with the LCD s...

19 Basic operations Основные операции Camera recording Notes on the LCD panel • When closing the LCD panel, turn it vertically until it clicks [ a ] . • When turning the LCD panel, turn it always vertically; otherwise, the camcorder body maybe damaged or the LCD panel may not closeproperly [ b ] . •...

20 Letting the subject monitor theshot You can turn the LCD panel over so that it facesthe other way and you can let the subject monitorthe shot while shooting with the viewfinder. Turn the LCD panel up vertically. When youturn the LCD panel 180 degrees, the indicator appears on the LCD screen (mirr...

21 Basic operations Основные операции Notes on mirror mode • When you turn the LCD panel about 90 degrees to 180 degrees, the camcorder enters mirrormode. • Using the mirror mode, you can record yourself while watching yourself on the LCD. • The picture on the LCD looks like a mirror- image while re...

23 Basic operations Основные операции Place the camcorder on a flat surface or use atripod Try placing the camcorder on a table top or anyother flat surface of suitable height. If you have atripod for a still camera, you can also use it withthe camcorder. When attaching a non-Sonytripod, make sure t...

24 Playing back a tape You can monitor the playback picture on theLCD screen or in the viewfinder. ( 1 ) Insert the recorded tape with the windowfacing out. ( 2 ) While pressing OPEN, open the LCD panel. ( 3 ) While pressing the small green button on thePOWER switch, set it to VTR. ( 4 ) Press 0 to ...

25 Basic operations Основные операции Playing back a tape To display the LCD screen/viewfinder screenindicators Press DISPLAY. (p. 116)To erase the indicators, press again. Note on screen indicators The screen indicator disappears when the title isdisplayed. Using headphones Connect headphones (not ...

26 To view the picture at 1/3 speed(slow playback) Press & on the Remote Commander during playback. For slow playback in reverse direction,press < , then press & . To resume normal playback, press ( . To view the picture at double speed For double speed playback in the reversedirection, p...

27 Basic operations Основные операции Searching for the endof the picture You can go to the end of the recorded portionafter you record and play back the tape. The tapestarts rewinding or fast-forwarding and the lastabout 5 seconds of the recorded portion playsback. Then the tape stops at the end of...

28 Advanced operations Using alternativepower sources You can choose any of the following powersources for your camcorder: battery pack, mains,and 12/24 V car battery. Choose the appropriatepower source depending on where you want touse your camcorder. Place Power Accessory to be usedsource Indoors ...

29 Advanced operations Усовершенствованные операции To remove the connecting plate The connecting plate is removed in the same wayas the battery pack. WARNING The mains lead must only be changed at aqualified service shop. PRECAUTION The set is not disconnected from the AC powersource (mains) as lon...

30 You can change the mode settings in the menusystem to further enjoy the features andfunctions of the camcorder. ( 1 ) Press MENU to display the menu on the LCDscreen. ( 2 ) Turn the control dial to select the desireditem, then press the control dial. Only theselected item is displayed. ( 3 ) Turn...

31 Advanced operations Усовершенствованные операции Changing the mode settings Selecting the mode setting ofeach item r is set at the factory. Items for both CAMERA and VTRmodes LCD BRIGHT Select this item to adjust the brightness of theLCD screen. The LCD screen becomes brighterwhen you turn the co...

32 Changing the mode settings DISPLAY <LCD or V-OUT/ r LCD> • Normally select LCD.• Select V-OUT/LCD to display indicator both on the LCD panel and TV screen. AUTO TV ON <ON/ r OFF> You can use this feature only with Sony TVs.• Select ON to turn on the TV automatically when using the LAS...

33 Advanced operations Усовершенствованные операции Changing the mode settings DEMO MODE < r STBY/ON or OFF> • Select STBY/ON to glance over the function of camcorder. • Select OFF not to display demonstration. Notes on DEMO MODE • DEMO MODE is set to STBY (Standby)/ ON at the factory and the ...

34 Changing the mode settings AUDIO MIX* Select this item and adjust the balance betweenthe stereo 1 and stereo 2 by turning the controldial. CM SEARCH < r ON/OFF> • Select ON to search using cassette memory.• Select OFF to search without using cassette memory. DATA CODE <DATE/CAM or r DATE...

35 Advanced operations Усовершенствованные операции Shooting withbacklighting [a] [b] BACK LIGHT When you shoot a subject with the light sourcebehind the subject or a subject with a lightbackground, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears on the LCD screen or in the vi...

36 Using the FADERfunction You can fade in or out to give your recording aprofessional appearance.When fading in, the picture gradually fades infrom black while the sound increases. Whenfading out, the picture gradually fades to blackwhile the sound decreases. When fading in [a] ( 1 ) While the camc...

37 Advanced operations Усовершенствованные операции To cancel the fader function Before pressing START/STOP, press FADERuntil the fade indicator disappears. You cannot use the fader function in thefollowing situations – The START/STOP MODE switch is set to ANTI GROUND SHOOTING or 5SEC . – The camcor...

38 Photo recording You can record a still picture like a photographfor about seven seconds. This photo recording isuseful when you want to enjoy a picture such asa photograph or when you print a picture using avideo printer (not supplied). You can recordabout 510 pictures on a 60-minute tape in SPmo...

39 Advanced operations Усовершенствованные операции LINE IN VIDEO S VIDEO Video printer Видеопринтер Ç : Signal flow/ Передача сигнала When you press PHOTO during normalrecording The picture on the LCD screen or in theviewfinder whenever you press PHOTO will berecorded. You cannot check the recorded...

41 Advanced operations Усовершенствованные операции Using the wide modefunction Selecting wide picture mode ( 1 ) Press MENU to display the menu on the LCDscreen. ( 2 ) Turn the control dial to select 16:9WIDE, thenpress the control dial. ( 3 ) Turn the control dial to select ON, then pressthe contr...

42 Using the PROGRAMAE function You can select from six PROGRAM AE (AutoExposure) modes to suit your shooting situation.When you use PROGRAM AE, you can get aPortrait effect (the subject is in focus and thebackground is out of focus), capture high-speedaction, record night views, etc. Selecting the ...

44 Focusing manually When to use manual focus In the following cases you should obtain betterresults by adjusting the focus manually. • Insufficient light [a] • Subjects with little contrast — walls, sky, etc. [b] • Too much brightness behind the subject [c] • Horizontal stripes [d] • Subjects throu...

45 Advanced operations Усовершенствованные операции Focusing manually When focusing manually, first focus in telephotobefore recording, and then reset the shot length. ( 1 ) Press FOCUS. The f indicator appears on the LCD screen or in the viewfinder. ( 2 ) Turn the control dial to focus on the subje...

46 Enjoying pictureeffect Selecting picture effect You can make pictures like those of televisionwith the Picture Effect function. PASTEL [a] The picture is in pastel tones. NEG. ART [b] The colour of the picture is reversed. SEPIA The picture is sepia. B&W The picture is monochrome (black and w...

47 Advanced operations Усовершенствованные операции Enjoying picture effect Using picture effect function ( 1 ) Press MENU to display the menu on the LCDscreen. ( 2 ) Turn the control dial to select P EFFECT, thenpress the control dial. ( 3 ) Turn the control dial to select the desiredpicture effect...

48 Adjusting theexposure [ a ] [ b ] 1 2 EXPOSURE When to adjust the exposure Adjust the exposure manually under thefollowing cases. [ a ] • The background is too bright (back lighting)• Insufficient light: most of the picture is dark [ b ] • Bright subject and dark background• To record the darknes...

49 Advanced operations Усовершенствованные операции Adjusting the exposure Superimposing a title If you use a tape with cassette memory, you cansuperimpose the titles while recording or afterrecording. When you play back the tape, the titleis displayed for 5 seconds from the point whereyou superimpo...

50 Superimposing a title Superimposing titles ( 1 ) Press TITLE to display the titles on the LCDscreen or in the viewfinder. ( 2 ) Turn the control dial to select the title, thenpress the control dial. ( 3 ) Turn the control dial to select the colour, size,or position, then press the control dial. (...

51 Advanced operations Усовершенствованные операции While you are playing back, pausing,or recording After step 6, “SAVE” appears on the screen for 5seconds and the title is set. While in Standby mode After step 6, the “TITLE” indicator appears. Andwhen you press START/STOP to start recording,“SAVE”...

52 Notes on titles • While the title is displayed, the picture does not fade in or out. • You cannot superimpose a title to a blank portion of the tape. • The titles you superimposed are displayed by only using the DV format video equipmentwith index titler function. • When you are searching the tap...

53 Advanced operations Усовершенствованные операции Erasing a title ( 1 ) Press MENU to display the menu. ( 2 ) Turn the control dial to select TITLEERASE,then press the control dial. ( 3 ) Turn the control dial to select the title youwant to erase, then press the control dial. ( 4 ) Make sure the t...

55 Advanced operations Усовершенствованные операции Making a custom title To erase a character In step 3, turn the control dial to select [ M ] then press the control dial. The last character is erased. To change the title you have made In step 2, turn the control dial to select CUSTOMTITLE, then pr...

56 If it takes more than 5 minutes to make a title If the Standby mode lasts for more than 5minutes with a cassette inserted, the power willbe turned off automatically. If the power isturned off while you are making a title, set thePOWER switch to OFF once, then to CAMERA.The title you have made rem...

57 Advanced operations Усовершенствованные операции To erase a character In step 5 turn the control dial to select [ M ], then press the control dial. The last character is erased. To change the label you have made Insert the cassette to change the label, andoperate in the same way to make a new lab...

58 Labeling a cassette If the mark appears in step 4 The cassette memory is full. If you erase the titlein the cassette, you can label it. If you have superimposed titles in the cassette When the label is displayed, up to 4 titles alsoappear. Note on “-----” indicator displayed on the LCDscreen or i...

59 Advanced operations Усовершенствованные операции When you shoot, the indicator appears on the LCD screen or in the viewfinder. This indicatesthat the SteadyShot function is working and thecamcorder compensates for camera-shake. You can release the SteadyShot function whenyou do not need to use th...

60 To activate the SteadyShot functionagain Select ON in step 3, then press the control dial. Notes on the SteadyShot function • The SteadyShot function will not correct excessive camera-shake. • When you switch the SteadyShot function on or off, the exposure may fluctuate. • When the SteadyShot fun...

61 Advanced operations Усовершенствованные операции Connect the camcorder to your VCR or TV towatch the playback picture on the TV screen.When monitoring the playback picture byconnecting the camcorder to your TV, werecommend you to use mains for the powersource. Connecting directly to a VCR/TVwith ...

62 Watching on a TV screen If your VCR or TV is a monaural type Connect only the white plug for audio on boththe camcorder and the VCR or the TV. If youconnect the white plug, the sound is L (left)signal. If you connect the red plug, the sound is R(right) signal. Using the AV cordless IRreceiver  L...

63 Advanced operations Усовершенствованные операции Watching on a TV screen If you use a Sony TV • You can turn on the TV automatically when you press LASER LINK or ( . To do so, set AUTO TV ON to ON in the menu system andturn the TV’s main switch on , then do either ofthe following; – Point the LAS...

64 Searching the boundaries of recorded tape with date – date search You can search for the boundaries of recordedtape with date – Date Search function. To searchthe beginning of the specific date and play backfrom the point, there are two ways:• Using cassette memory, you can select the date displa...

65 Advanced operations Усовершенствованные операции To stop searching Press p . Notes • The interval of the boundaries between the dates needs more than two minutes. Thecamcorder may not search if the beginning ofthe recorded date is too close to the next one. • The short cursor on the screen sugges...

67 Advanced operations Усовершенствованные операции D A T E S E A R C H 5 6 1 2,3,4 MENU C M S E A R C H O N O F F VTR CAMERA OFF POWER MENU Searching the boundariesof recorded tape withtitle – title search You can search for the boundaries of recordedtape with title – Title Search function. If you ...

69 Advanced operations Усовершенствованные операции Searching for a photo – photo search/photo scan You can search for the recorded still picture –Photo Search function. There are two modes inPhoto Search:• Using cassette memory, you can select the recorded date which is displayed on the LCDscreen o...

70 P H O T O S E A R C H P H O T O S E A R C H 5 6 1 2,3,4 MENU C M S E A R C H O N O F F 2 2 / 8 / 9 8 1 7 : 0 03 4 / 9 / 9 8 1 1 : 0 0 1 1 / 7 / 9 8 8 : 5 2 2 2 / 8 / 9 8 1 7 : 0 03 4 / 9 / 9 8 1 1 : 0 0 1 1 / 7 / 9 8 8 : 5 2 VTR CAMERA OFF POWER MENU Searching for a photo by usingcassette memory ...

73 Advanced operations Усовершенствованные операции 2 3 PHOTO 00 SCAN 1 VTR CAMERA OFF POWER Scanning photo – photo scan You can use this function whether the tape hascassette memory or not. ( 1 ) Set the POWER switch to VTR. ( 2 ) Press SEARCH MODE on the RemoteCommander repeatedly until the photo ...

74 Using the Remote Commander, you can easily goback to the desired point on a tape afterplayback. ( 1 ) During playback, press ZERO SET MEMORYat the point you later want to locate. Thecounter shows “0:00:00” and “ZERO SETMEMORY” appears on the LCD screen or inthe viewfinder. ( 2 ) Press p when you ...

75 Advanced operations Усовершенствованные операции MANUAL1 0 0 0 0 AWBF 1 . 6 1 8dB 4 7 199810:13:02 DATA CODE You can display recording data (date/time orvarious settings when recorded) on the LCDscreen or in the viewfinder during playback(Data Code). The Data Code is also displayed onthe TV.You c...

76 Editing onto anothertape You can create your own video programme byediting with any other DV, mini DV, h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC or l Betamax VCR that has audio/video inputs. You can edit with littledeterioration of picture and sound quality whenusing the DV connecting cable...

77 Advanced operations Усовершенствованные операции Editing onto another tape Ç : Signal flow/ Передача сигнала S VIDEOOUT (not supplied)/ (Не прилагается) AUDIO/VIDEOOUT S VIDEO IN VIDEO AUDIO [a] [b] Notes on editing when using the DVconnecting cable • You can connect one VCR only.• You can record...

78 Editing onto another tape Notes on editing when using the A/Vconnecting cable • Press DATA CODE , SEARCH MODE, or DISPLAY to turn off the display indicators.Otherwise, the indicators will be recorded onthe tape. • If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting...

79 Advanced operations Усовершенствованные операции Replacing recordingon a tape – insertediting You can insert a new scene from a VCR ontoyour originally recorded tape by specifyingstarting and ending points. After insertingediting, the previous picture and sound will beerased.Connection is the sam...

80 LINE OUT L R You can record an audio sound to add to theoriginal sound on a tape by connecting audioequipment or a microphone. If you connect theaudio equipment, you can add a sound on yourrecorded tape by specifying starting and endingpoints. The original sound will not be erased. Note You can c...

81 Advanced operations Усовершенствованные операции Audio dubbing Notes on audio dubbing • A new sound cannot be recorded on a tape already recorded in the 16-bit mode (32 kHz,44.1 kHz or 48 kHz). • When an external microphone is not connected, the recording will be made through the built-inmicropho...

82 Audio dubbing MENU [ ] M E N U A U D I O M I X S T 1 S T 2 : E N D To play back the new recorded sound Adjust the balance between the original sound(ST1) and the new sound (ST2) by selectingAUDIO MIX in menu system. Five minutes after when you disconnect thepower source or remove the battery pack...

83 Additional information Дополнительная информация Additional information Usable cassettes andplayback modes Selecting cassette types You can use the mini DV cassette only. You cannot use any other DV, h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S- VHSC or l Betamax cassette. We recommend mini DV cass...

84 When you play back Copyright signal When playing back Using any other video camera recorder, youcannot record on a tape that has recorded acopyright control signals for copyright protectionof software which is played back in thiscamcorder. When recording Using this camcorder, you cannot recordsof...

85 Additional information Дополнительная информация Usable cassettes andplayback modes Notes on the mini DV cassette To prevent accidental erasure Slide out the protect tab on the cassette so thatthe red portion is visible. [a] When affixing a label on the mini DVcassette Be sure to affix a label on...

86 Charging the vanadium-lithium battery in thecamcorder Your camcorder is supplied with a vanadium-lithium battery installed so as to retain the dateand time, etc., regardless of the setting of thePOWER switch. The vanadium-lithium battery isalways charged as long as you are using thecamcorder. The...

88 To correct the date and time setting Repeat steps 2 to 5. The year indicators changes as follows: Note on the time indicator The internal clock of this camcorder operates ona 24-hour cycle. Resetting the date and time 1998 1999 2029 ..... 2001 ..... 1998 1999 2029 ..... 2001 ..... Для корректиров...

89 Additional information Дополнительная информация Tips for using thebattery pack This section shows you how you can get the mostout of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3times as much recording as you have ...

90 Tips for using the batterypack When to replace the batterypack While you are using your camcorder, theremaining battery indicator on the LCD screen orin the viewfinder decreases gradually as batterypower is used up.The remaining time in minutes also appears. When the remaining battery indicator r...

91 Additional information Дополнительная информация Tips for using the batterypack Battery pack care • Remove the battery pack from thecamcorder after using it , and keep it in a cool place. When the battery pack is installed to thecamcorder, a small amount of current flows tothe camcorder even if t...

93 Additional information Дополнительная информация Why the remaining batteryindication does not match thecontinuous recording time in theoperating instruction The recording time is affected by theenvironmental temperature and conditions. Therecording time becomes very short in a coldenvironment. Th...

94 Notes on the terminals If the terminals (metal parts on the back)are not clean, the battery charge durationwill be shortened. When the terminals are not clean or when thebattery pack has not been used for a long time,repeatedly install and remove the battery pack afew times. This improves the con...

95 Additional information Дополнительная информация Maintenance informationand precautions Moisture condensation If the camcorder is brought directly from a coldplace to a warm place, moisture may condenseinside the camcorder, on the surface of the tape,or on the lens. In this condition, the tape ma...

96 Maintenance informationand precautions Video head cleaning To ensure normal recording and clear pictures,clean the video heads.The video heads may be dirty when:• mosaic-pattern noise appears on the playback picture • playback pictures do not move• playback pictures are hardly visible• playback p...

97 Additional information Дополнительная информация Precautions Camcorder operation • Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor). • Should any solid object or liquid get inside the casing, unplug the camcorder and have itchecked by Sony dealer before operating it anyfu...

98 AC power adaptor Charging • Use only an “InfoLITHIUM” type battery pack.• Place the battery pack on a flat surface without vibration during charging. • The battery pack will get hot during charging. This is normal. Others • Unplug the unit from the mains when not in use for a long time. To discon...

99 Additional information Дополнительная информация Note on dry batteries To avoid possible damage from battery leakageor corrosion, observe the following.• Be sure to insert the batteries in the correct direction. • Dry batteries are not rechargeable.• Do not use a combination of new and old batter...

100 Using your camcorderabroad Each country or area has its own electric and TVcolour systems. Before using your camcorderabroad, check the following points. Power sources You can use your camcorder in any country orarea with the supplied AC power adaptor within110 V to 240 V AC, 50/60 Hz. Differenc...

101 Additional information Дополнительная информация If you run into any problem using the camcorder, use the following table to troubleshoot the problem.Should the difficulty persist, disconnect the power source and contact your Sony dealer or localauthorized Sony service facility. Camcorder Power ...

102 Operation Symptom The tape does not move when a tapetransport button is pressed. No sound or only a low sound is heardwhen playing back a tape. The new sound added to the recordedtape is not heard. The SteadyShot function does not activate. Recording stops in a few seconds. The autofocus functio...

103 Additional information Дополнительная информация Operation Symptom The title search function does not work. indicator does not appear when using a tape with cassette memory. The Date Search, Title Search, or EndSearch does not work correctly. Picture Symptom The image on the viewfinder screen is...

104 Others Symptom While editing using the DV connectingcable, recording picture cannot bemonitored. The camcorder becomes warm. The supplied Remote Commander doesnot work. No function works though the power ison. AC power adaptor Symptom The VTR/CAMERA or CHARGE lampdoes not light. The CHARGE lamp ...

105 Additional information Дополнительная информация When the CHARGE lamp flashes Check through the following chart. Trouble check When the CHARGE lamp flashesagain Install another battery pack. When the CHARGE lamp flashesagain The problem is with the AC poweradaptor. Please contact your nearest So...

106 Cause and/or corrective actions • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour.(p. 95) • The video heads are dirty. m Clean the heads using the Sony DVM12CL cleaning cassette (notsupplied). (p. 96) • A serviceable situation not malfunction...

107 Additional information Дополнительная информация Русский Проверка неисправностей Если у Вас возникла какая-либо проблема при использовании видеокамеры, воспользуйтесь следующей таблицей для отыскания и устранения проблемы. Если трудности все еще остаются, то отсоедините источник питания и обрати...

108 Работа Признак Лента не перемещается принажатии кнопки перемещенияленты. Нет звука или только низкий звукслышен при воспроизведенииленты. Новый звук, наложенный наленту, не прослушивается.Не активизируется функцияустойчивой съемки.Запись останавливается черезнесколько секунд. Не активизируется ф...

109 Additional information Дополнительная информация Продолжение на следующей странице Работа Признак Функция поиска титра не работает. Индикатор не появляется при использовании ленты кассеты с памятью.Поиск даты, поиск титра или поиск конца не работает правильно. Изображение Признак Изображение на ...

110 Действия по исправлению • Отсоедините сетевой провод. Приблизительно через 1минуту снова подсоедините сетевой провод. (стр. 7) • Смотрите схему на следующей странице. Проверка неисправностей Проверка неисправностей Признак Во время монтажа с использованием цифрового видеокабелязаписываемое изобр...

111 Additional information Дополнительная информация Проверка неисправноестей Когда мигает лампочка CHARGE Проверьте по следующей схеме. Если лампочка CHARGE мигаетопять Установите другой батарейныйблок. Если лампочка CHARGE мигаетопять Имеется проблема у сетевогоадаптера перем. тока. Обратитесь, по...

112 C : 21: 00 STBY 40min 40min Русский Функция самодиагностики Причина и/или действия по исправлению • Произошла конденсация влаги. m Выньте кассету и оставьте видеокамеру по меньшей мерена 1 час. (стр. 95) • Грязные видеоголовки. m Очистите видеоголовки с использованием очистительнойкассеты DVM12C...

113 Additional information Дополнительная информация English Specifications Mass Approx. 620 g excluding the batterypack and the cassetteApprox. 700 g including the batterypack NP-F330 and cassette DVM60Approx. 730 g including the batterypack NP-F550 and cassette DVM60Approx. 730g including the batt...

114 Русский Технические характеристики Видеокамера Система Система видеозаписи Две вращающиеся головки, система наклонной механической развертки Система аудиозаписи Вращающиеся головки, система РСМ Квантование: 12 битов (сдвиг по частоте 32 кГц, стереозвучание 1, стереозвучание 2)16 битов (сдвиг по ...

115 Additional information Дополнительная информация 1 Viewfinder lens adjustment lever (p. 13) 2 RESET button (p. 104) 3 Control dial (p. 30) 4 PHOTO button (p. 38) 5 START/STOP button (p. 12) 6 POWER switch (p. 12, 24) 7 Operation buttons[ a ] When the POWER switch is set to VTR 0 (rewind) button ...

118 Identifying the parts @§ Hook for shoulder strap (p. 122) @¶ LANC l control jack l stands for Local Application Control Bus System. The l control jack is used for controlling the tape transport of videoequipment and peripherals connected to it.This jack has the same function as the jackindicated...

119 Additional information Дополнительная информация Identifying the parts #¢ LASER LINK button (p. 62) #∞ Laser Link emitter (p. 62) #§ Microphone #¶ Speaker #• Remote sensor (p. 121) #§ #∞ #¶ #• #¢ Опознавание частей #¢ Кнопка LASER LINK (стр. 62) #∞ Эмиттер лазерной связи (стр. 62) #§ Микрофон #¶...

120 Identifying the parts Remote Commander The buttons that have the same name on theRemote Commander as on the camcorderfunction identically. 1 PHOTO button (p. 38) 2 DISPLAY button (p. 25) 3 SEARCH MODE button (p. 64, 68, 70) 4 = / + buttons (p. 64, 68, 70) 5 Tape transport buttons (p. 24) 6 REC b...

121 Additional information Дополнительная информация To prepare the Remote Commander To use the Remote Commander, you must inserttwo R6 (size AA) batteries. Use the supplied R6(size AA) batteries. ( 1 ) Remove the battery cover from the RemoteCommander. ( 2 ) Insert both of the R6 (size AA) batterie...

122 Notes on the Remote Commander • Keep the remote sensor away from strong light sources such as direct sunlight or illumination.Otherwise, the remote control may not beeffective. • Be sure that there is no obstacle between the remote sensor on the camcorder and theRemote Commander. • This camcorde...

123 Additional information Дополнительная информация Identifying the parts Operation indicators 1 Mirror mode indicator (p. 20) 2 Zoom indicator (p. 16) /Exposure indicator (p. 48) 3 Manual focus/Infinity indicator (p. 45) 4 PROGRAM AE indicator (p. 42) 5 SteadyShot indicator (p. 59) 6 BACK LIGHT in...

124 Identifying the parts !¢ Recording standby mode indicator (p. 13) / Tape transport mode indicator !∞ Time code indicator (p. 14) /Self diagnosis indicator (p. 106) !§ Remaining tape indicator (p. 15) !¶ ZERO SET MEMORY indicator (p. 74) /Photo capture indicator (p. 38) !• END SEARCH indicator (p...

125 Additional information Дополнительная информация !º Warning indicators If indicators flash on the LCD screen or in theviewfinder or warning messages appear on thedisplay window, check the following: ≥ : you can hear the beep sound when BEEP is set to ON in the menu system. 1 The battery is weak ...

127 Index A, B Audio mode ................................ 84Battery release ............................ 10BEEP ............................................ 14 C Car battery .................................. 29Cassette memory ......................... 4Charging battery pack ................ 7Charg...

Sony Corporation Printed in Japan A Автомобильный аккумулятор ............................................. 29 Б,В,Г Введение/выведение изображения ....................... 36 Воспроизведение на телевизоре .......................... 61 Временной код ...................... 14 Д,Е Демонстрация ...........