Smeg FAB38RWHAU - User Manual

7 EN Instructions 1.4 Disposal This appliance must be dis- posed of separately from other waste (Directives 2002/95/EC, 2002/96/EC, 2003/108/EC). The appliance does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current Eu...

Instructions 8 1.7 How to read the user manual This user manual uses the following reading conventions: Warning Serious injury or death risk Risk of electric shock Dangerous voltage risk Fire Warning; risk of fire / flamma- ble materials Caution Injury or property damage risk Important Operating the...

9 EN Description 2 Description of the appliance 2.1 General description This presentation is only for information about the parts of the appliance. Parts may vary according to the appli- ance model. A) Refrigerator compartment B) Freezer compartment 1) Display and control panel 2) Turbo fan * 3) Ref...

10 Use 3 Using the appliance 3.1 Information about New Gen- eration Cooling Technology Fridges with new-generation cooling technology have a different operating sys- tem to static fridges. Other (static) fridges may experience a build up of ice in the freezer compartment due to door openings and hum...

11 EN Use 3.3.1 Freezer Temperature Settings • The initial temperature value for the freezer setting indicator is -18 °C. • Press the freezer set button once. When you first press the button, the previous value will blink on the screen. • Whenever you press the same but- ton, a lower temperature wil...

12 Use Recommended Settings for the Freezer and Refrigerator Compartment Tem- perature Freezer Compart- ment Refrigera- tor Compart- ment Remarks -18 °C 4 °C For regular use and best performance. -20 °C, -22 °C or -24 °C 4 °C Recommended when environ- mental temper- ature exceeds 30 °C. Super Freeze...

13 EN Use 3.5 Accessories3.5.1 Ice Tray (In some models) • Fill the ice tray with water and place in the freezer compartment. • After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes. 3.5.2 The Icemaker (In some models) • Pull the lever towards you and r...

14 3.5.3 The Freezer Box The freezer box allows food to be accessed more easily. Freezer boxes Removing the freezer box: • Pull the box out as far as possible • Pull the front of the box up and out Carry out the opposite of this operation when refitting the sliding compartment.Always keep hold of th...

15 EN To remove the Chiller Shelf: • Pull the chiller shelf towards you by sliding it on the rails. • Pull the chiller shelf up from the rail and remove it from the refrigerator. 3.5.5 The Fresh Dial (In some models) Fresh dial If the crisper is full, the fresh dial located in front of the crisper s...

16 3.5.7 Adjustable Glass Shelf (In some models) Fig. 1 Fig. 2 Adjustable glass shelf mechanism provides higher storage spaces with a simple movement. To cover the glass shelf, push it. You can load your food as you want in the resulting extra space. To bring the shelf in its original position, pull...

17 EN 4 Food storage 4.1 Refrigerator Compartment For normal operating conditions, set the temperature of the refrigerator compart- ment to +4 or +6 °C. • To reduce humidity and avoid the consequent formation of frost, always store liquids in sealed containers in the refrigerator. Frost tends to con...

18 4.2 Freezer Compartment For normal operating conditions, set the temperature of the freezer compartment to -18 or -20 °C. • The freezer is used for storing frozen food, freezing fresh food, and mak- ing ice cubes. • For freezing fresh food; wrap and seal fresh food properly, that is the packaging...

21 EN Cleaning and Maintenance 5 Cleaning and Maintenance 5.1 Defrosting Occasional presence of frost inside the freezer compartment is normal. Do not use electrical applianc- es (e.g. hair dryers) or sprays for defrosting, the plastic parts could be damaged. Defrosting the refrigerator/freezer comp...

22 5.3 Cleaning the appliance A special antibacterial protection on the appliance’s interior walls prevents bacterial growth and keeps them clean. They must nevertheless be cleaned regularly in order to keep them in good condition. Do not wash your appliance by pouring water on it. Cleaning the outs...

24 air which has entered the freezer. The doors are misaligned: • Check that the appliance is level. • Level the appliance using its feet. 6 Installation 6.1 Electrical connection Power voltage Danger of electrocution • The appliance must be connected to ground in compliance with electrical system s...

25 EN Installation climate class displayed on the infor- mation label. We do not recommend operating your appliance out of the stated temperature limits in terms of cooling effectiveness. Important installation instructions This appliance is designed to work in difficult climate conditions and is po...

26 Installation wall. • The distance between the appliance and back wall must be a maximum of 75 mm. 6.4 During Usage • Do not connect your appliance to the mains electricity supply using an extension lead. • Do not use damaged, torn or old plugs. • Do not pull, bend or damage the cord. • Do not use...

27 EN Installation raw material consumption and therefore decreases waste production. Notes: • Please read the instruction manual carefully before installing and using your appliance. We are not respon- sible for the damage occurred due to misuse. • Follow all instructions on your appli- ance and in...

28 In order for the freezer to be installed correctly, the door must be able to close properly. Ensure that the door seals close hermetically, especially at the corners. Pressure on the seal Risk of damage to the appli- ance • Do not press, do not tear or detach the seal from the door. A few days af...

29 EN 8 Before calling after-sales service Errors Your appliance will warn you if the tem- peratures for the appliance and freezer are at improper levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer and refrigerator indicators. ERROR TYPE  MEANING  WHY  WHAT ...

32 9 Tips for saving energy 1. Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (such as a radiator or oven) otherwise an insulating plate should be used. 2. Allow warm food and drinks to cool before placing them inside the appli- ance. 3. ...