Page 2 - Copyright; All rights reserved. Printed in China; Trademarks
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ...
Page 3 - Limited Warranty
Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from...
Page 5 - Compliances; Reorient the receiving antenna; EC Conformance Declaration - Class A; SMC contact for these products in Europe is:
Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener...
Page 8 - Stromkabel; benutzt wird geprüft werden:; Warnings and Cautionary Messages; This product does not contain any serviceable user parts.; Warnings
nur gegeben, wenn auch die an das Gerät angeschlossenen Geräte unter SELV-Bedingungen betrieben werden Stromkabel . Dies muss von dem Land, in dem es benutzt wird geprüft werden: Schweiz Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen ein- halten. Europe Das Netzkabel muß vom Typ HO3VVF3GO.75 (...
Page 9 - Servicepersonal durchgeführt werden.
Achtung: Installation und Deinstallation des Gerätes müssen von qualifiziertem Servicepersonal durchgeführt werden. Achtung: Wenn das Gerät an eine Steckdose angeschlossen wird, muß der Masseanschluß n Netzstecker mit Schutzerde verbunden werden, um elektrische Gefahren zu vermeiden.
Page 11 - Package Contents; missing, please contact with your distributor for assistance.
Package Contents The following items should be found in your box: ¾ One 10/100/1000Mbps Gigabit Ethernet PC Adapter ¾ One Resource CD, including • Drivers • User Guide • Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or m...
Page 12 - CONTENT
CONTENT Chapter 1. Introduction............................................................................................ 1 1.1 Convention ......................................................................................................... 1 1.2 Product Overview .................................
Page 13 - Gigabit PCI Ethernet Adapter User Guide; Chapter 1. Introduction; Overview
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 1 Chapter 1. Introduction Thank you for choosing SMC9452TX-2 Gigabit PCI Ethernet Adapter. 1.1 Convention The Adapter or SMC9452TX-2 mentioned in this User Guide stands for SMC9452TX-2 Gigabit PCI Ethernet Adapter. 1.2 Product Overview SMC9452TX-2 ...
Page 14 - Features
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 2 1.3 Main Features ¾ Integrated Ethernet MAC, Physical chip and transceiver in one chip ¾ Complies with the IEEE802.1P, IEEE802.1Q, IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE802.3ab 1000Base-T standard ¾ Compliant to PCI Revision 2.1/2.2 ¾...
Page 15 - Chapter 2. Installation; Hardware Installation; To install the adapter, follow these steps listed below:
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 3 Chapter 2. Installation 2.1 Hardware Installation To install the adapter, follow these steps listed below: Step 1: Turn off your computer and unplug the power cord and all cables. Step 2: Remove your computer’s case cover. See your computer’s use...
Page 16 - Software Installation; System; Next
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 4 2.2 Software Installation In this User Guide, we will take the driver installation in Windows XP for example, which is similar to the driver installation procedures for the other operation systems. 2.2.1 Install driver for XP Step 1: After you in...
Page 17 - as shown in; as shown below. Then click
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 5 Step 2: Select Install from a list or specific location (Advanced) as shown in Figure 2-3, and then click Next . Figure 2-3 Step 3: Select Don’t search. I will choose the driver to install as shown below. Then click Next .
Page 19 - as shown in Figure 2-7 to locate the driver in the next; Open; Step 7: Locate the appointed driver as shown in Figure 2-8
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 7 Step 6: After that, select Browse… as shown in Figure 2-7 to locate the driver in the next screen. Figure 2-6 , click Open . Step 7: Locate the appointed driver as shown in Figure 2-8 Figure 2-7
Page 20 - Step 9: Select the model of the Adapter as shown in Figure 2-10
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 8 ), click OK . Step 8: After that, you will see the next screen (shown in Figure 2-9 Figure 2-8 , then click Next . Step 9: Select the model of the Adapter as shown in Figure 2-10 Figure 2-9
Page 21 - to continue the installation since our drivers have been
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 9 Step 10: After that, please wait few seconds for the wizard installing the software. Figure 2-10 ) Note: During the installation, a warning box about Windows Logo testing (shown in Figure 2-12) may pop up, please click Continue Anyway to continue...
Page 22 - And the driver installation for Windows XP completes.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 10 Step 11: Finally, click Finish. And the driver installation for Windows XP completes. Figure 2-12
Page 26 - Step 7: Select the model of the Adapter as shown in Figure 2-20; Browse...; to locate the driver in the next screen.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 14 , then click Next . Step 7: Select the model of the Adapter as shown in Figure 2-20 Figure 2-17 Step 8: After that, select Browse… to locate the driver in the next screen. Figure 2-21
Page 27 - Step 9: Locate the appointed driver as shown in; Assuming D is the letter of your CD-ROM drive.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 15 Step 9: Locate the appointed driver as shown in Figure 2-22, click Open . Figure 2-22 Step 10: After that, you will see the next screen, click OK . Figure 2-18 ) Note: Assuming D is the letter of your CD-ROM drive.
Page 30 - icon as shown in the Figure 2-28, select the; Properties; in the next
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 18 2.2.3 Update driver for Vista step 1. Insert the Driver & Installation CD into your CD-ROM drive, right-click the Computer icon as shown in the Figure 2-28, select the Properties . Figure 2-19 step 2. Select Device Manager as shown in Figure...
Page 31 - and select “; Update Driver Software...; ” to install the software.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 19 step 3. Right-click the adapter icon “ Realtek RTL8169/8110 Family Gigabit Ethernet NIC ”, and select “ Update Driver Software… ” to proceed. Figure 2-21 step 4. Select “ Browse my computer for driver software ” to install the software. Figure 2...
Page 32 - Have Disk...”
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 20 step 5. Click the “Let me pick from a list of device drivers on my computer” in the next screen. Figure 2-23 step 6. Click “ Have Disk…” in the next screen (shown in Figure 2-23). Figure 2-24
Page 37 - Enable Wake on LAN function; mode or after shutdown.; To enable WOL (take the configuration in Windows XP for example):; ” icon on the desktop and select “; ” and then “; Device Manager; ” in the next screen.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 25 2.3 Enable Wake on LAN function This function allows a remote station “wake” your computer when it is in Standby or Hibernate mode or after shutdown. To enable WOL (take the configuration in Windows XP for example): a) Right click “ My Computer ...
Page 38 - title on the next advanced configure page, then highlight the; Enable
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 26 c) Right click “ SMC9452TX-2 Gigabit Ethernet PCI Adapter ”, and then select “ Properties ” d) Select the Advance title on the next advanced configure page, then highlight the Wake-On-Lan After Shutdown item and set the value as Enable .
Page 39 - ) The name of this
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 27 ) Note: 1) The name of this Wake-On-Lan After Shutdown function is system-dependent, and it may be located in a category heading titled such as “Power Management”. See your computer’s user guide for more information regarding the BIOS Setup util...
Page 40 - Appendix A: Specifications; Normal; IEEE; Environmental and Physical
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 28 Appendix A: Specifications Normal Interface 32-bit PCI Standards IEEE 802 .3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.ab 1000Base-T Access Protocol CSMA/CD Connector one 10/100/1000M Auto-Negotiation RJ45 port Driver Novell NetWare3.x, 4.x, 5....
