Page 3 - The easy way to make all your network connections
20 MasonIrvine, CA 92618Phone: (949) 679-8000 Wireless USB AdapterUser Guide The easy way to make all your network connections October 2007 Pub. # 149100040600E E102007-EK-R01
Page 5 - Limited Warranty
v Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase fr...
Page 7 - Compliances; Federal Communication Commission Interference Statement; Canada RSS Statement; Canada IC Statement
i Compliances Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re...
Page 8 - ii; Japan VCCI Class B; EC Conformance Declaration
ii Australia/New Zealand AS/NZS 4771 Japan VCCI Class B Taiwan DGT (NCC) 根據交通部低功率管理辦法規定： 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅 自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 EC Conformance Declarat...
Page 9 - iii
iii Council recommendation 1999/519/EC of 12 July 1999, limitations of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) Czech Danish German Hiermit erklärt SMC Networks, dass sich dieses Wireless LAN Gerat in Übereinstimmung mit den grundlegenden Anforderungen und den ander...
Page 10 - iv
iv Icelandic Norwegian Hér með lýsir SMC Networks yfir því að Radio LAN device er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. SMC Networks erklærer herved at utstyret Radio LAN device er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999...
Page 11 - Countries of Operation & Conditions of Use in EC / EFTA member states
v Countries of Operation & Conditions of Use in EC / EFTA member states SMC Contact for this device in Europe is: SMC Networks Europe,Edificio Conata II,Calle Fructuos Gelabert 6-8, 2, 4a,08970 - Sant Joan Despi,Barcelona, Spain English This device is a 2.4 GHz wireless LAN transceiver, intended...
Page 13 - About This Guide; Purpose; Related Publications; Revision History
v About This Guide Purpose This guide details the hardware features of the wireless USB adapter, including its physical and performance-related characteristics, and how to install the device and use its configuration software. Audience This guide is for PC users with a working knowledge of computers...
Page 15 - Contents; Chapter 1: Introduction
vii Contents Chapter 1: Introduction 1-1 Features 1-1System Requirements 1-2 Package Checklist 1-2 Hardware Description 1-2 LED Indicators 1-3 WPS Button 1-3 Chapter 2: Driver and Utility Installation 2-1 Chapter 3: Configuration 3-1 Accessing the EZ Connect Wireless Utility 3-1 Wireless Utility Con...
Page 16 - Appendix A: Troubleshooting; USB Adapter Installation Problems; Appendix B: Specifications
viii Contents About 5-10Help 5-11 Appendix A: Troubleshooting A-1 USB Adapter Installation Problems A-1 Network Connection Problems A-1 Uninstalling the Utility A-2 Appendix B: Specifications B-1
Page 17 - Features
1-1 Chapter 1: Introduction The SMCWUSBS-N is a Wi-Fi (IEEE 802.11b/g/n) Wireless USB Adapter that enables wireless connectivity for your PC. The device provides a Wi-Fi client solution for PCs using a USB 2.0 interface. The USB adapter also includes a comprehensive configuration, site survey, and p...
Page 18 - Introduction; System Requirements; Package Checklist; Hardware Description
Introduction 1-2 System Requirements Before you install the EZ Connect Wireless USB Adapter, check your system meets the following requirements: • 2.4 GHz 802.11n (draft 2.0) or 802.11b/g wireless network. • Microsoft Windows 2000, XP or Vista. • A Notebook or desktop computer with: - 300MHz CPU or ...
Page 19 - LED Indicators
LED Indicators 1-3 LED Indicators The Wireless USB Adapter includes two status LED indicators, as described in the following figure and table. WPS Button Use the WPS button on the Wireless USB Adapter to automatically connect multiple devices to the network. Within two minutes, press the physical or...
Page 21 - Chapter 2: Driver and Utility Installation
2-1 Chapter 2: Driver and Utility Installation The CD-ROM that comes with the package contains the USB driver and software utility for the Wireless USB Adapter. New or updated drivers can be downloaded from SMC’s web site at http://www.smc.com. The installation screens are similar for all Microsoft ...
Page 22 - Driver and Utility Installation; Figure 2-2. EZ Connect N CD - Driver and Utility Installation
Driver and Utility Installation 2-2 3. Click Next to continue the installation. Figure 2-2. EZ Connect N CD - Driver and Utility Installation 4. Wait for the software installation procedure to complete. Figure 2-3. EZ Connect N CD - Installation in Progress
Page 25 - Chapter 3: Configuration; Accessing the EZ Connect Wireless Utility; Figure 3-1. Accessing EZ Connect N Wireless Utility
3-1 Chapter 3: Configuration Accessing the EZ Connect Wireless Utility Once the the SMC EZ Connect Wireless utility installation is complete, the configuration utility can be accessed by selecting the “SMC EZ Connect N Wireless Utility” icon from the “SMC EZ Connect N Wireless Utility” folder. Figur...
Page 26 - Configuration; Wireless Utility Configuration
Configuration 3-2 Wireless Utility Configuration The SMC EZ Connect Wireless utility screen includes the options in the table below. For details on the configuration for each feature, see the corresponding page number. Table 3-1. Utility Configuration Options Tools Description Page Profile Configure...
Page 27 - Profile; System Configure; Profile Name; SSID; Network Type
Wireless Utility Configuration 3-3 Profile The profile settings page allows you to set and save different wireless settings. You can activate the suitable profile according to the environment where the wireless connection is used. Figure 3-3. Profile - System Configuration To Add a profile, click th...
Page 29 - Authentication / Encryption
Wireless Utility Configuration 3-5 • Authentication / Encryption — Configure authentication and encryption to match the security of the wireless network. Figure 3-4. Profile - Authentication\Encryption The displayed items on this page can be described as follows: • Authentication – Select the authen...
Page 31 - EAP Method; PEAP; TTLS
Wireless Utility Configuration 3-7 network access control that uses a RADIUS server on the local network for user authentication. The 802.1X standard uses the Extensible Authentication Protocol (EAP) to pass user credentials (either digital certificates, usernames and passwords, or other) from the c...
Page 33 - Network; Sort by; Show dBm; Rescan; Add to Profile
Wireless Utility Configuration 3-9 Network The network setting page allows you to set and save different wireless settings. You can activate the suitable profile according to the environment where the wireless connection is used. Figure 3-7. Network The displayed items on this page can be described ...
Page 35 - Advanced
Wireless Utility Configuration 3-11 Advanced The Advanced page allows you to configure extended features for the wireless network. Figure 3-10. Advanced The displayed items on this page can be described as follows: Wireless Mode — Select 802.11 B/G/N mix or 802.11 B/G mix as the wireless mode. Enabl...
Page 36 - Country Region Code; Statistics
Configuration 3-12 Country Region Code — Select the country in which the device is being used. Setting the country code restricts operation of the device to radio channels and transmit power levels permitted for wireless networks as specified by the local regulatory authority Statistics The statisti...
Page 37 - WMM
Wireless Utility Configuration 3-13 WMM Wi-Fi Multimedia (WMM), also known as Wireless Multimedia Extensions (WME), is a Wi-Fi Alliance interoperability certification. It provides basic Quality of Service (QoS) features for IEEE 802.11 wireless networks. Figure 3-12. WMM The displayed items on this ...
Page 38 - WPS; Enrollee
Configuration 3-14 WPS Wi-Fi Protected Setup (WPS) is based on push-button or PIN (Personal Identification Number) entry authentication to provide strong WPA/WPA2 encryption keys to client devices. Users can push a button on the access point and the client device to exchange the encryption key. With...
Page 39 - Registrar; WPS Setup - PIN Configuration
Wireless Utility Configuration 3-15 - Registrar – A registrar is the network enrollment center. If the Wireless USB Adapter is set as a registrar, click the Rescan button on the utility WPS setup page to search for WPS-enabled wireless devices near you. All enrollees found will be displayed in the W...
Page 40 - Radio Setting
Configuration 3-16 Radio Setting Press the Radio On/Off icon to disable or enable the radio signal connection. About The about page displays the information about version numbers of the configuration utility, firmware and other information of the device. Click the WWW.SMC.COM button to visit the SMC...
Page 41 - Help
Wireless Utility Configuration 3-17 Help The help page provides detailed information about each setting of the EZ Connect utility. Click the contents on the left screen and view the information on the right screen. Figure 3-1. Help Screen Display
Page 43 - Chapter 4: Network Planning; Ad hoc; Infrastructure; Network Topologies; Ad Hoc Wireless LAN
4-1 Chapter 4: Network Planning SMC's EZ Connect Wireless Solution supports a stand-alone wireless network configuration, as well as an integrated configuration with Ethernet LANs. The SMCWUSBS-N wireless USB adapter can be configured as: • Ad hoc - for small peer-to-peer networks with other wireles...
Page 44 - Network Planning
Network Planning 4-2 The infrastructure configuration not only extends the accessibility of wireless PCs to the wired LAN, but also increases the effective wireless transmission range for wireless PCs by passing their signal through one or more access points. A wireless infrastructure can be used fo...
Page 45 - Chapter 5: AP Mode Configuration; Switching to AP Mode
5-1 Chapter 5: AP Mode Configuration The USB Adapter's utility can extend the functionality of the device by adding an Access Point (AP) mode to its normal client capabilities. In AP mode, the USB Adapter operates as a "Soft AP." The Soft AP feature creates a Wireless LAN to Ethernet bridge ...
Page 46 - AP Mode Configuration; AP Mode Utility Configuration
AP Mode Configuration 5-2 Double-click the quick launch icon to open the Soft AP utility configuration for the next time. The utility screens are similar in all Microsoft Windows systems. The interface for Windows XP is described in this user guide. AP Mode Utility Configuration The Soft AP utility ...
Page 50 - Access Control
AP Mode Configuration 5-6 Access Control The access control page allows you to restrict the MAC address connected to this AP. Figure 5-3. Access Control The displayed items on this page can be described as follows: Access Policy — Select a policy for access control. (Default: Disable) • Disable – Di...
Page 51 - MAC Table; MAC Address; AID; Power Saving Mode
AP Mode Utility Configuration 5-7 MAC Table The MAC table page displays the current station link information. Figure 5-4. MAC Table The displayed items on this page can be described as follows: MAC Address — The MAC addresses of the connected stations. AID — Raise value by the current wireless conne...
Page 52 - Event Log
AP Mode Configuration 5-8 Event Log The event log page displays system messages generated during system operation. The logged messages can serve as a valuable tool for isolating Wireless USB Adapter and network problems. Figure 5-5. Event Log
Page 54 - About
AP Mode Configuration 5-10 About The about page displays the information about version numbers of the configuration utility, firmware and other information of the device. Click the WWW.SMC.COM button to visit the SMC website for other information. Figure 5-7. About Information Display
Page 58 - Troubleshooting; Uninstalling the Utility
Troubleshooting A-2 Uninstalling the Utility If you are having problems with the utility, you may need to uninstall the software from the system. Follow these steps: 1. From the Windows Start menu, find the SMC EZ Connect N Utility uninstall option. Click to start the uninstall process. 2. Click Yes...
Page 62 - Specifications
Specifications B-2 Physical Size 82 x 26 x 11 mm (3.23 x 1.02 x 0.43 in.) Weight 16 g (0.56 oz) Temperature Operating: -10 to 50 °C (14 to 122 °F) Humidity 5% to 90% EMC FCC: Part15 subpart CIC: RSS-210CE: EN300328NCC: LP0002C-Tick Radio FCC: Part15 subpart BIC: CES-003CE: EN301489-1/-17 Safety CE: ...
