Silvercrest SRD 250 A1 - Manual

6 SRD 250 A1 GB IE Safety Interaction with batteries WARNING Danger from improper use! For safe handling of batteries observe the following safety instructions: Do not throw batteries into a fi re. ► Do not short circuit batteries. ► Do not attempt to recharge batteries. ► Never open, solder or weld ...

8 SRD 250 A1 GB IE Operating components Operating components SNOOZE Button: Alarm interupt 2 Display 3 POWER-LED: Lights up when the device is switched on 4 MHz-LED: Lights up with VHF reception 5 kHz-LED: Lights up with MW reception 6 SLEEP-LED: Lights up when the SLEEP function is switched on 7 TU...

9 SRD 250 A1 GB IE Setting up and connecting Setting up and connecting Package contents and transport inspection The appliance is delivered with the following components as standard: Clock Radio ● Operating instructions ● Extract the appliance and the instruction manual from the carton and remove al...

10 SRD 250 A1 GB IE Setting up and connecting The surfaces of furniture may contain components that can aff ect ■ the rubber pads of the appliance and could soften them. If neces-sary, place a covering under the appliance's rubber pads. The mains power socket must be easily accessible so that, in an ...

11 SRD 250 A1 GB IE Handling and operation Open the cover of the battery compartment ♦ 11 on the bottom of the device.Insert two 1.5 V batteries type R6/LR6/AA/Mignon (not supplied) ♦ into the battery compartment 11 . For correct polarity make sure that the batteries are inserted according to the di...

12 SRD 250 A1 GB IE Handling and operation NOTICE The time of day will revert back to - -:- - if the device is discon- ► nected from the mains power supply and no batteries have been inserted. Radio operation Press the POWER/BAND button ♦ 9 to switch the device on. With the VOL control ♦ 18 set the ...

13 SRD 250 A1 GB IE Handling and operation Programming the wake time and method When programming the alarm times, you can select whether, at the programmed time, alarm tones should sound or the radio should start playing. Two diff erent alarm times (Alarm 1/Alarm 2) can be programmed. Press and hold ...

14 SRD 250 A1 GB IE Handling and operation Switching the alarm function on Press briefl y the AL1 button ♦ 16 and/or AL2 button 15 . In the dis- play 2 a point appears to the left and/or to the right. The alarm function is now activated. Switching the alarm off Whilst the alarm is sounding press the P...

15 SRD 250 A1 GB IE Cleaning Press repeatedly the SLEEP button ♦ 14 until the desired switch of time is shown in the display 2 . To switch off the sleep function press repeatedly the SLEEP button ♦ 14 , until in the display 2 is shown. The SLEEP-LED 6 goes out. Setting the display illumination Set th...

16 SRD 250 A1 GB IE Troubleshooting Troubleshooting In this chapter you will receive important information for the locali-sation of malfunctions and their remedies. Observe the instructions in order to avoid danger and damage. Malfunction causes and remedies The following table will help with locali...

17 SRD 250 A1 GB IE Storage/Disposal Storage If you do not intend to use the appliance for an extended period of time, disconnect it from the mains power supply, remove the battery and store it at a clean, dry location that is not subjected to direct sunlight. Disposal Disposal of the appliance Do n...

18 SRD 250 A1 GB IE Appendix Appendix Technical data Operational voltage 220-240 V / 50 Hz Batteries for power reserve 2 x 1.5 V battery Type AA/Mignon/R6/LR6 (Batteries not supplied) Power consumption Operation 10 W Standby approx. 1.5 W Max. Loudspeaker Output Power 250 mW Frequency FM (USW) 87.5 ...

19 SRD 250 A1 GB IE Appendix Information regarding the EG Conformity Declaration This appliance complies with, in regard to conformance to the basic requirements and other relevent regulations, the European Directive for Electromagnetic Compatibility 2004/108/EC, the Low Voltage Directive 2006/95/EC...

20 SRD 250 A1 GB IE Appendix Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended as a result of warranty adjustments. This applies also to replacement and repaired parts. Damage and defects potentially present at the time of purchase must be...