Page 9 - How to Use this Manual; Manual Organization
How to Use this Manual Siemens Building Technologies 1 How to Use this Manual The Advanced Operator Panel (AOP) enhances the user interface and communications capability of the SED2 Variable Frequency Drives (“SED2 VFD”). Manual Organization This manual contains the following sections: − How to Use ...
Page 10 - Manual Notations; Where To Send Comments
SED2 AOP Operating Instructons 2 Siemens Building Technologies Manual Notations Notation Symbol Meaning DANGER: Indicates that personal injury or loss of life may occur if you do not perform a procedure as specified. WARNING: Indicates that equipment damage, or loss of data may occur if you do not p...
Page 11 - AOP Overview; AOP Menu Structure
AOP Overview Siemens Building Technologies 3 AOP Overview AOP Menu Structure The menus available on the AOP display depend on the currently active operating mode. The following diagram shows the menu structure when the AOP is in either the Local or Master operating mode. OPERATEDIAGNOSTICSPARAMETERS...
Page 12 - Key Functions
SED2 AOP Operating Instructions 4 Siemens Building Technologies Key Functions NOTE: This symbol is used throughout this manual to indicate a special keypad function. Key/ Function Functional Description Stops the motor. OFF1 Press this button to stop the SED2 within the selected ramp-down time. As p...
Page 14 - Important Notes; Power-on and Initialization
SED2 AOP Operating Instructions 6 Siemens Building Technologies AOP Start-Up & Initialization Important Notes CAUTION: • You can mount or remove the AOP while power is applied to the SED2 VFD. • You must set Command Source P0700[1]=4 (USS on BOP link or AOP) before the AOP can start or stop an a...
Page 15 - Language Selection; Start Help
AOP Start-Up & Initialization Siemens Building Technologies, Inc. 7 Language Selection 1. The AOP provides the capability to display information in five different languages. NOTE: Prior to language selection, the AOP has no control over the SED2 VFD. CAUTION: Memory Limitation: The delivered AOP...
Page 16 - Quick Commissioning
SED2 AOP Operating Instructions 8 Siemens Building Technologies Quick Commissioning NOTE: Simultaneously press and , at any time, to display the main menu. The following table describes the main menu items. Menu Item Description Operate Displays the current status of the SED2 VFD/motor. Diagnostics ...
Page 19 - AOP Applications; Single Drive Control Using the AOP
AOP Applications Siemens Building Technologies 11 AOP Applications NOTES: 1. If the AOP is the command source for the SED2, set USS Telegram Off Time for Serial Interface BOP Link P2014[1]=5000 (5 seconds). To do this, first set P0003=3. The P2014[1]=5000 setting causes the drive to trip if communic...
Page 21 - Editing Parameters; Parameter Access Levels
Editing Parameters Siemens Building Technologies 13 Editing Parameters Parameter Access Levels You can edit SED2 VFD parameters via the AOP. Access levels control access to the SED2 VFD parameters. A higher access level corresponds to a more sophisticated level of control techniques available for th...
Page 22 - Editing Indexed Parameters
SED2 AOP Operating Instructions 14 Siemens Building Technologies 5. Press to confirm the new parameter value. The AOP returns to the parameter screen so you can select another parameter, if desired. Press to return to the r0000 display. Press again to return to the previous menu. Press for several s...
Page 23 - AOP Stored Parameter Sets
Editing Parameters Siemens Building Technologies, Inc. 15 6. Press to access the index value. Use and to scroll through the index values and to highlight the desired index value. 7. Press to confirm the new index value. The AOP returns to the parameter selection screen so you can select another para...
Page 25 - Wait Request; Parameter Download
Editing Parameters Siemens Building Technologies, Inc. 17 1. From the main menu, use and to scroll through the list of options and to highlight the Upread item. Press to confirm the selection. Press to cancel the upload process. The AOP displays an upload/upread menu. NOTE: In master mode, the AOP p...
Page 27 - AOP Operating Modes; Selecting an Operating Mode
AOP Operating Modes Siemens Building Technologies 19 AOP Operating Modes Selecting an Operating Mode The mode menu allows you to select the desired AOP operating mode. The following table summarizes the AOP operating modes and lists associated main menu items. Main Menu Items Operating Mode Operate ...
Page 28 - Operating in Local Mode
SED2 AOP Operating Instructions 20 Siemens Building Technologies 2. Press to confirm the selected operating mode (press to return to the main menu.) NOTE: To exit an operating mode, either follow the on-screen instructions or return to the main menu and select the mode menu to choose a different ope...
Page 29 - Operating in Master Mode (Broadcast Operation)
AOP Operating Modes Siemens Building Technologies, Inc. 21 Operating in Master Mode (Broadcast Operation) In master mode, the network controls the SED2 VFDs either individually or by broadcast operation. A broadcast operation can simultaneously start or stop all networked SED2 VFDs. While in broadca...
Page 30 - Timer Function; Setting the AOP Timer
SED2 AOP Operating Instructions 22 Siemens Building Technologies Timer Function NOTES: 1. Before using the timer function as a control method, set the AOP real time clock as described in the Set Time/Date section. 2. Setting a timing event for ‘every day’, configures the same event for each day of t...
Page 32 - AOP Setup & Configuration; Setup Menu
SED2 AOP Operating Instructions 24 Siemens Building Technologies AOP Setup & Configuration Setup Menu Using the Setup option from the Main Menu of the AOP, you can personalize the following characteristics of the AOP: • Backlighting • Screen Contrast • Large Numbers • Cursor Type • Start Help • ...
Page 33 - Screen Contrast
AOP Setup & Configuration Siemens Building Technologies, Inc. 25 4. When you select ON for backlighting timer, the AOP displays a backlighting time setting screen. Use and to set the timer period of inactivity (in seconds). Press to confirm the setting and the AOP returns to the setup menu. NOTE...
Page 35 - Parameter Set Names
AOP Setup & Configuration Siemens Building Technologies, Inc. 27 2. Use and to select an ON or OFF user text status. Press to cancel this selection and to return to the setup menu. Press to confirm the selection and the AOP displays a text screen with the first character highlighted. The text st...
Page 36 - AOP Reset
SED2 AOP Operating Instructions 28 Siemens Building Technologies 3. The AOP displays a set day/date screen and highlights the first field (day of week). Use and to scroll through and highlight the desired day of week. Press to confirm the entry. The cursor advances to the first date field (day of mo...
Page 37 - AOP Faults & Warnings; Fault Indication/Fault Screen
AOP Faults & Warnings Siemens Building Technologies 29 AOP Faults & Warnings NOTE: If a fault/warning condition occurs on a SED2 VFD(s) to which an AOP connects, a fault/warning code displays with a description of the relevant fault/warning. For a list of fault/warning codes, see the SED2 VF...
Page 38 - Multiple Faults
SED2 AOP Operating Instructions 30 Siemens Building Technologies Multiple Faults If a SED2 VFD or network of VFDs reports more than one fault condition, the AOP displays all fault messages by cycling through them until they are all cleared. See Fault Indication/Fault Screen in this chapter to acknow...
