Sherwood R-865 - Manual

MANUFACTURED UNDER LICENSE FROM DOLBYLABORATORIES. "DOLBY", "PRO LOGIC", AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DLOBY LABORATORIES. SPEAKER IMPEDANCE FRONT , CENTER , SURROUND A or B, SURROUND BACK : 6 OHMS ( ) MIN.SURROUND A and B : 12 OHMS( ) MIN. 3 12 7 1 8 14 10 9 9 2 5 6 4 3 ...

ENGLISH 6 TAPE MONITOR Tape deck, MD recorder, etc. AUDIO IN R L AUDIO OUT R L AUX Additional tape deck. etc. AUDIO OUT R L CD CD player, etc. AUDIO OUT R L • The TAPE MONITOR IN/OUT jacks may also be connected to the LINE OUT/IN jacks of an optional graphic equalizer. 2. CONNECTING AUDIO COMPONENTS...

7 ENGLISH • The jacks of VIDEO 1/VIDEO 2 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • For ROOM 2 playback, the VIDEO 2/ ROOM 2 OUT jacks can be connected to the amplifier, TV, ...

ENGLISH 8 4. CONNECTING DIGITAL INs and OUT • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, AUX and VIDEO1~ VIDEO 4 of this unit can be connected to theseDIGITAL INs. • A digital input should be connected to the components such as a CD player, LD player, DVD pl...

ENGLISH 9 6. CONNECTING PREOUTs • Use these jacks when adding additional power amplifiers.• Connect the PREOUT jacks to the powered speakers or the power amplifiers connected to speakers respectively.• When using only one surround back speaker, connect the SURROUND BACK LEFT jack to the power amplif...

ENGLISH 10 Front right Front left Surround A right Surround B right Surround Aleft Surround Bleft Surround back right (or "Passive" subwoofer) Center Surround back left 9. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the ...

ENGLISH 11 Ideal speaker placement varies depending on the size of your roomand the wall coverings, etc. The typical example of speaker placementand recommendations are as follows : Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV...

ENGLISH ROOM 2 connections • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the VIDEO 2 / ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect t...

ENGLISH 14 Front Panel Controls 1. POWER switch2. STANDBY button/indicator3. DECODING MODE button4. STEREO button5. DIGITAL/ANALOG button6. PURE AUDIO button7. VIDEO SELECTOR button8. AUDIO SELECTOR button9. TAPE MONITOR button 10. 8 CH DIRECT button11. MASTER VOLUME CONTROL knob12. MULTI CONTROL kn...

DOLBY H DIGITAL EX VIRTUAL DIRECT AUTO DTS ES 96/24 NEO:6 PCM PRO LOGIC SOUND TAPE MON STEREO MPEG PURE ANALOG DIGITAL TUNED PRESET VIDEO SET 1 2 3 4 Z R2 MUTE CINE-EQ MEMORY AP-SW A B L C R SL SW SR SB LFE 1 2 10 11 12 13 14 15 16 17 3 4 5 6 7 3 8 9 18 192021 22 ENGLISH 15 FLUORESCENT DISPLAY 1. CH...

ENGLISH 16 Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video componentssuch as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc.• To operate 7 components other than this rece...

ENGLISH 17 FUNCTION TABLE of the NUMBERED BUTTONS. Device to be controlled Button symbol (for CD player) POWER ON STANDBY POWER ON STANDBY POWER ON STANDBY MENU SETUP DISPLAY RETURN RECORD STOP STOP REVERSE PLAY FORWARD PLAY PAUSE PAUSE PLAY PLAY PLAY NUMERIC NUMERIC NUMERIC NUMERIC NUMERIC NUMERIC ...

ENGLISH 18 7m 30 30 LOADING BATTERIES REMOTE CONTROL OPERATION RANGE 1 2 • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30degrees aiming at the remote sensor. OPERATING COMPONENTS WITH REMOTE CONTROL • Remove the batteries when they are not used for a lo...

19 ENGLISH USING FUNCTIONS OF REMOTE CONTROL Entering a setup code • This remote control can control up to 8 different components.• Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system r...

ENGLISH 20 • If any of buttons fails to operate as they should, start from the step again to find the correct setup code. Repeat the above steps to for each of your other components. 7 Searching a setup code Perform the steps and in “Entering a setup code” procedure on page 19 to selectthe setup cod...

ENGLISH 23 Programming a macro function Example) When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver. 1. Press “AUDIO” button to control this receiver.2. Press “POWER ON” button to turn this receiver on.3. Press “VIDEO 2(7)” button to select the desired input source. 4. ...

ENGLISH 25 Operating a punch-through function • Each time the CURSOR UP( )/DOWN( ) buttons are pressed, depending on the selected punch-through mode, the punch-through devices and thedeleting mode (“DELETE”) are selected. • Then “OK” is displayed and the current punch- through mode is displayed . Wh...

27 ROOM 2 Remote Controls This remote control unit is an additional remote control unit for the ROOM 2 source playback only.• You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. LOADING BATTERIES 1 2 REMOTE CON...

ENGLISH 28 LISTENING TO A PROGRAM SOURCE Operations Before operation Select the desired input source. 3 • Enter the standby mode. • The STANDBY button lights up in amber. This means that the receiver is notdisconnected from the AC mains and asmall amount of current is retained tosupport the operatio...

ENGLISH DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channeldigital signal format which can handle higher data rates. Discsbearing the “ ” include the recording of up to 5.1 channels of digital signals, which can be generally thoughtto provide better sound quality due...

ENGLISH Dolby Pro Logic IIx surround Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1channel sources and extends to 7.1channel surroundplayback. It delivers the most natural, full range andimmersing 7.1 channel listening experience. Dolby Pro LogicIIx surround includes two modes as follow...

ENGLISH 34 ENJOYING SURROUND SOUND • Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer. Note: • Before surround playback, first perform the SP...

ENGLISH Continued 35 When canceling the surround mode for normal stereo operation. • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2 CH downmix mode, select the desired surround mode with usi...

ENGLISH 36 To listen in a Dolby Headphone mode • The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel surround sound through 2 channel headphones, just like listening from 5.1 channel speakers. Note : Only when the HEADPHONE SELECTOR button is set ...

ENGLISH or DOWN UP 37 Enter the test tone mode. 1 • The volume level of each channel can be adjusted easily with the test tone function. Note: When speakers are switched off , the test tone function does not work. Cancel the test tone function. 3 Adjusting each channel level with test tone • The tes...

ENGLISH 39 LISTENING TO RADIO BROADCASTS Auto tuning • Auto presetting function automatically searches for FM stations only and store them in the memory.• While listening to radio broadcasts, press and hold down the (ENTER/)MEMORY button for more than 3 seconds. • Then “ AUTO” appears on the display...

ENGLISH Repeat the above steps to to memorize other stations. 4 • The station has now been stored in the memory.• A stored frequency is erased from the memory by storing another frequency in its place. • If “MEMORY” goes off, start again from the above step . MEMORY BACKUP FUNCTION The following ite...

ENGLISH 42 RECORDING • The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs can be heard but cannot be recorded. • The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals. Start recoding on the componentconnect...

ENGLISH 43 DIGITAL AUDIO RECORDING WITH MD RECORDER For digital recording, select the desireddigital input as recording signal input. 2 Select a desired input of CD, AUX andVIDEO 1~VIDEO 4 as a recording source. 1 Start recording on the componentconnected to OPTICAL DIGITAL OUT. 3 • Only when the OP...

ENGLISH 44 OTHER FUNCTIONS • This function compresses the dynamic range of previously specified parts of the Dolby Digital soundtrack(with extremely high volume)to minimize thedifference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track whenwa...

46 ROOM 2 SOURCE PLAYBACK • This function allows enjoying one source in the main room and playing another in a different room at the same time.• The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be outp...

47 Using the OSD CURRENT STATUS DISPLAY This mode shows the status corresponding to each operation.• The on-screen display will automatically disappear in several seconds.• For examples, there are 2 status displays as follows. Notes : • When watching a movie earnestly, if you want to turn off the cu...

49 • You can assign the power amplifier for the surround back channels to the ROOM 2. In this case, you need not use the power amplifier to drive the speakers additionally in a different room (ROOM 2). R E T U R N : B a c k , : S e l e c t P O W E R A M P A S S I G N S / B A C K R O O M 2 SETTING TH...

51 Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the ENTER button. 1 When selecting the SPEAKER DISTANCE • Then “ ” and “ ” are moved to the unit mode. • Each time these buttons are pressed, “Meters” or “Feet” is selected. • Once a unit is selected, the distances ...

52 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as desired. 2 • Each time these buttons are pressed, the Dolby Virtual Speaker mode changes as follows : On : Select this to activate the Dolby Virtual Speaker function. Off : Select this to cancel it. Press th...

53 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode. 6 • Each time these buttons are pressed, the virtualization mode changes as follows: WIDE: This mode expands the front channel sound field. REFERENCE: This is the standard mode. Notes : • When “WIDE” is selected as virtualizati...

54 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired crossoverfrequency. 2 • You can select the desired within 40~120 Hz in 20 Hz intervals(default value: 80 Hz). • For speakers set to “Small”, sound with a frequency below the selected crossover frequency is cut, andinstead the cut bas...

55 ENGLISH • Loud test tones are output from each speaker and then if auto speaker setup procedure has been completed, the results of each adjustment will be displayed. • Each time the ENTER button is pressed, the auto speaker setup procedure will start or stop.• If there may be a problem with speak...

56 ENGLISH • Then the results are memorized.• Each time the CURSOR LEFT( ) or RIGHT( ) button is pressed, the “MEMORY” or “START” is selected. • However, if error message is displayed, the results cannot be memorized due to incorrect speaker connections, etc.. In this case, turn off the power, check...

57 • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding DIGITAL IN. • You should assign the connected DIGITAL INs to the desired of CD, AUX and VIDEO 1~4. (For details, refer to “CONNECTING DIGITAL INs and OUT” on page 8.) Note: • When the pure audio function is activate...

ENGLISH 58 • Each time these buttons are pressed, the modes change as follows: C I N EM A E Q : T O N E D E F E A T : Off Off T ON E C O N T R O L B A S S - - - - - - - - - - 0 dB T R E B L E - - - - - - - - - - 0 dB R E T U R N : B a c k , : S e l e c t Press the CURSOR UP( )/DOWN( ) buttons to sel...

ENGLISH 59 • Each time these buttons are pressed, the video input source changes. Press the CURSOR UP( )/DOWN( ) buttons to select the CURRENT VIDEO. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired video inputsource. 2 • Each time these buttons are pressed, the mode changes as foll...

ENGLISH 60 • Each time these buttons are pressed , the COMPONENT VIDEO INs change . Note : • In such a case that a COMPONENT VIDEO IN is assigned to two input sources or more, when theseinput sources are selected, the component videosignals can be viewed from the same COMPONENTVIDEO IN. • Each time ...

61 • To turn on the component connected to DC TRIGGER OUT jack when the desired input source is selected, you should link DC TRIGGER with the desired input source. D C T R I G G E R :T U N E R V I D E O 1C D V I D E O 2 A U X V I D E O 3 T A P E M O N . V I D E O 4 D C T R I G G E R S E T U P Off E ...

ENGLISH 62 • Each time these buttons are pressed, the A/V SYNC can be adjusted within the range of 0~6 frame. Press the CURSOR UP( )/DOWN( ) buttons to select the A/V SYNC. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the A/V SYNC as desired. 2 When selecting the A/V SYNC • There may be a s...

ENGLISH 63 When selecting the DECODING MODE, SURROUND MODE, DYNAMIC RANGE • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding mode. • Each time these buttons are pressed, the modes change as follows according to the selected item : When DECODING MODE is selected • Depen...

ENGLISH 64 When the SURROUND MODE is selected • Depending on the input signal format and the selected decoding mode, you can select the desired surround mode as follows: Signal format being input Selected decoding mode Selectable surround mode Dolby Digital 5.1, Auto, Dolby Digital mode (DOLBY DIGIT...

ENGLISH 65 P A N O R A M A : C E N T E R W I D T H + - - - - - - - 0 D I M E N S I O N - - - - + - - 0 - 0 + Off P L I I x M U S I C P A R A M E T E R R E T U R N : B a c k , : S e l e c t Press the CURSOR UP( )/DOWN( ) buttons to select the PL II(x) MUSIC PARAMETER, then press the ENTER button. 1 W...

ENGLISH 66 • Each time these buttons are pressed , the mode changes as follows : CALL : Select this to recall the channel levels memorized into preset memory . SAVE : Select this to memorize the channel levels adjusted in the CH LEVEL TRIM menu or in“Adjusting the current channel levels”procedure on...

ENGLISH 69 • The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time.• The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from...

ENGLISH 70 • Each time these buttons are pressed, the ROOM 2 FEED mode is changed to “On” or “Off”. • When the ROOM 2 FEED mode is set to “Off”, the ROOM 2 source cannot be selected. • When you do not use the ROOM 2 function, set the ROOM 2 FEED mode to Off to save electricity. Press the CURSOR UP( ...

ENGLISH 71 Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the surroundspeakers No sound from the center speaker No sound from the surround backspeakers Stations cannot be received Preset stations cannot be received Poor FM reception Continuous hissing noise durin...

ENGLISH AMPLIFIER SECTION • Power output, stereo mode, 8 Ω , THD 0.05%, 20 Hz~20 kHz | 2 100 W • Total harmonic distortion, 8 Ω , 100 W, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω , 100 W | 0.09 % • Input sensitivity/impedance Line (CD, TAPE MONITOR, VIDEO) | 200 mV...

ENGLISH 73 Setup Code Table AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003 Bell & Howell 019 001 Bradford 027 Brockwood 003 Broksonic 028 031 CXC 027 Candle 005 011 Carniva...

ENGLISH 74 Admiral 027 021 Adventura 000 Aiko 025 Aiwa 005 000 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 021 001 CCE 015 025 Calix 005 Canon 004 Carver 081 Cineral 025 Citizen 005 025 Colt 015 Craig 005 012 ...

ENGLISH 76 Magnin 023 Memorex 005 028 (TV use 025) Mitsubishi 027 (TV use 041) Orion 001 Panasonic 004 (TV use 008) 028 (TV use 042) Penney 004 (TV use 008) 023 028 (TV use 042) Quasar 004 (TV use 008) 028 (TV use 042) RCA 013 (TV use 012) 004 (TV use 008) 027 (TV use 041) Sansui 000 Sanyo 023 Sear ...

ENGLISH 77 Stargate 010 014 026 Starquest 010 TV86 015 Teleview 014 Tocom 007 008 Toshiba 000 Tusa 010 Unika 018 United Artists 007 Universal 153 019 Viewstar 015 Zenith 000 024 Zentek 022 AlphaStar 008 Chaparral 001 Echostar 009 Expreevu 009 General Instrument 016 015 018 HTS 009 Hitachi 011 Hughes...