Page 2 - Specifications
2 XG-C50X Specifications LCD ProjectorXG-C50XNTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480 I /DTV480P/DTV540P/DTV580 I /DTV580P/DTV720P/DTV1035 I /DTV1080 I LCD panel × 3, RGB optical shutter method Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm) No. of dots: 786,432 dots (1,024 [H] ×...
Page 4 - PRECAUTION POUR LES RADIATIONS UV; UV-RADIATION PRECAUTION; AVOID DIRECT EYE AND SKIN EXPOSURE.
4 XG-C50X NOTE POUR LE PERSONNELD’ENTRETIEN PRECAUTION POUR LES RADIATIONS UV L a s o u r c e d e l u m i è r e , l a l a m p e m é t a l h a l i d e ,dans le projecteur émet de petites quantités der a d i a t i o n U V. EVITEZ TOUTE EXPOSITION DIRECTEDES YEUX ET DE LA PEAU. Pour votre sécurité, nou...
Page 5 - Lamp Replacement
5 XG-C50X 12345678901234567890123456789012123456789012345 12345678901234567890123456789012123456789012345 1234567890123456789012345678901212345678901234 1234567890123456789012345678901212345678901234 1234567890123456789012345678901212345678901234 1 2 Lamp Reflector Comme de petites quantités de radi...
Page 7 - Precautions for using lead-free solder; F a; Description
7 XG-C50X Precautions for using lead-free solder 1 Employing lead-free solder "Input, Output, R/C Receiver, Key and Fan PWB" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following...
Page 8 - Location of Controls
8 XG-C50X Location of Controls Projector (Front and Top View) Power (ON/OFF) buttons Turn the power on or off. Power indicator Illuminates red, when the projector is in standby. When the power is turned on, this indicator will illuminate green. Lamp replacement indicator Illuminates green indicating...
Page 11 - Connection Pin Assignments
11 XG-C50X Connection Pin Assignments RS-232C Terminal: 9-pin Mini DIN female connector Pin No. Signal Name I/O Reference 1 VCC +3.3V (Reser ved) Output Not connected 2 RD Receive Data Input Connected to internal circuit 3 SD Send Data Output Connected to internal circuit 4 EXIR Detector of Option U...
Page 12 - Dimensions
12 XG-C50X Dimensions Side View Side View Top View Rear View Front View Bottom View 3 15 / 16 (100.5) 9 1 / 2 (241.5) 15 3 / 8 (390) 5 (126.5) 1 / 16 (1.5) 1 / 16 (1.5) 3 1 / 8 (80) ø 67.5 4 3 / 8 (111.75) 2 15 / 16 (75) M4 M4 M4 M4 2 11 / 16 (67.5) 4 15 / 16 (124.5) 5 / 16 (7.5) 3 7 / 8 (99) 8 7 / ...
Page 13 - REMOVING OF MAJOR PARTS; Removal of the bottom filter cover and lamp unit cover
13 XG-C50X REMOVING OF MAJOR PARTS 1. Removal of the bottom filter cover and lamp unit cover 1-1. Detach the bottom filter cover.1-2. Loosen the lock screw from the lamp unit cover, and detach the lamp unit cover.1-3. Pull out the carrying handle.1-4. Press the ~ -marked spot of the upper half of th...
Page 14 - Removal of the PWBs
14 XG-C50X 3. Removal of the PWBs 3-1. Remove the two lock screws from the lamp socket angle. Detach the lamp socket angle.3-2. Lift the ballast unit. Disconnect the connector and detach the ballast unit.3-3. Remove the lock screw from the PWB unit cover and detach the cover.3-4. Remove the three lo...
Page 15 - RESETING THE LAMP TIMER
15 XG-C50X AC socket INPUT button ENTER button UNDO buttom Power (ON) button 1 Connect the power cord. Plug the power cord into the AC socketof the projector. 2 Reset the lamp timer. While pressing simultaneously , and • • • • on the projector, press ON on the projector. “LAMP 100%” is displayed, in...
Page 16 - THE OPTICAL UNIT OUTLINE
16 XG-C50X THE OPTICAL UNIT OUTLINE Layout for proper setup of the optical components and parts (top view) Projection Lens Relay lens3 Relay lens 2 Relay lens 1 M5 AL-coated mirror B M4 AL-coated mirror R Fly-eye lens (Output) L2 L2 L1 M3 B reflector G reflector R reflector M2 Fly-eye lens (Input) L...
Page 17 - Adjusting the mirrors
17 XG-C50X Adjusting the mirrors This adjustment is needed when any of the optical parts of the optical mechanism has been replaced.1. Disconnect the flat cables from all the LCD panels.2. Light up the lamp.3. Project a white-light image and check to see if there is any color tint in any direction. ...
Page 18 - Replacing the prism unit
18 XG-C50X Replacing the prism unit 1. Remove the four lock screws, and take the prism holder unit out of the optical unit.2. Replace the prism unit with new one. Take the above step 1 in reverse order. Note: Even if just one of the LCD panels is defective, it is necessary to replace the entire pris...
Page 19 - How to Release the System Lock
19 XG-C50X How to Release the System Lock Turn on the power. If the system lock is applied, the system-resetting screen appears. Press the following keys in this order. MENU → ENTER → ENTER → MENU → UNDO → UNDO → MENU After pressing the MENU key first, press the remaining six keys within 10 seconds.
Page 20 - ELECTRICAL ADJUSTMENT
20 XG-C50X ELECTRICAL ADJUSTMENT 1 Initialization ofEEPROM 1. Turn on the power (the lamp lights up) and warm up the system for 15minutes. No. Adjustment Items Adjustment Conditions Adjustment Procedures 1. Make the following settings. P r e s s S 2 6 0 1 t o e n t e r t h e p r o c e s smode, and e...
Page 25 - How to Adjust the PC I/F unit
25 XG-C50X How to Adjust the PC I/F unit 1. Initialization of EEPROM 1) Press SW2601 to enter the process mode. 2) Execute S1 on the SSS menu. (By S1, the PC board alone is initialized. Do not execute S2, or all the adjustment data, except for the PC I/F unit, is initialized.) 3) Make sure that the ...
Page 26 - Adjustment mode process menu
26 XG-C50X Group Sub Group Subject Adjust PC Image A/D R-BRIGHTG-BRIGHTB-BRIGHTR-D B-DG-DAD-AUT Adjust RGB Image OUTPUT1 R1-BLKR1-GAING1-BLK G1-GAINB1-BLKB1-GAINS-R1-BLKS-R1-GAINS-G1-BLK S-G1-GAINS-B1-BLKS-B1-GAIN Adjust Panel Drive OUTPUT2 PSIG-HPSIG-L Adjust Commn Voltage OUTPUT3 RC GCBCGCK-PHASE ...
Page 29 - TROUBLE SHOOTING TABLE
29 XG-C50X TROUBLE SHOOTING TABLE Yes Yes No No No Yes No No Yes Yes Yes Lamp fails to light-up Turn on the power switch.Is discharging sound heard from lamp? Is the lamp out of socket? Reconnect the lamp into socket. Replace the lamp Is the ballast cooling fan running? Is DC 280V/400V voltage appli...
Page 36 - TROUBLE SHOOTING TABLE for PC I/F UNIT
36 XG-C50X TROUBLE SHOOTING TABLE for PC I/F UNIT Checking of PC I/F UNIT Check the video input. Check the component input. Check the RGB input. Is the user menu displayed onscreen? End Check the onscreen display. Yes Yes Yes Yes Yes 0
Page 48 - Technische Daten
48 XG-C50X Technische Daten LCD PROJEKTORXG-C50XNTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480 /DTV480P/DTV540P/DTV580 /DTV580P/DTV720P/DTV1035 /DTV1080LCD-Panel x 3, optische RGB-VerschlussmethodePanel-Größe: 0,99tum(25,1 mm)(15[H] × 20[B] mm) Anzahl der Bildpunkte: 786.432 Bildpunkte (1.0...
Page 49 - HINWEIS FÜR DAS WARTUNGSPERSONAL; Auswechseln der Lampe
49 XG-C50X HINWEIS FÜR DAS WARTUNGSPERSONAL 12345678901234567890123456789012123456789012345 12345678901234567890123456789012123456789012345 12345678901234567890123456789012123456789012345 12345678901234567890123456789012123456789012345 12345678901234567890123456789012123456789012345 ACHTUNG: UV-STRA...
Page 50 - Vorsichtsmaßregeln für bleifreien Lötzinn
50 XG-C50X Vorsichtsmaßregeln für bleifreien Lötzinn 1 Verwendung von bleifreiem Lötzinn Die "Eingangs-, Ausgangs-, Fernbedienungs-, Schlüsell-, Fächer-Platine" dieses Modells verwendet bleifreien Lötzinn. Das LF-Symbol zeigt bleifreien Lötzinn an und ist an den Platinen und Wartungsanleitun...
Page 51 - Bedienelemente
51 XG-C50X Bedienelemente Netz-Tasten(ON/OFF) Schaltet die Stromversorgung ein oder aus. Netz-Anzeige Leuchtet rot, wenn sich der Projektor im Bereitschaftsbetrieb befindet. Wenn die Stromversorgung eingeschaltet ist, leuchtet diese Anzeige grün. LAMP-Anzeige (Lampenaustausch) Bei vorschriftsmäßiger...
Page 55 - Abmessungen
55 XG-C50X Abmessungen 3 15 / 16 (100,5) 9 1 / 2 (241,5) 15 3 / 8 (390) 5 (126,5) 1 / 16 (1,5) 1 / 16 (1,5) 3 1 / 8 (80) ø 67,5 4 3 / 8 (111,75) 2 15 / 16 (75) 2 11 / 16 (67,5) 4 15 / 16 (124,5) 5 / 16 (7,5) 3 7 / 8 (98,8) 8 7 / 16 (213,8) 11 9 / 16 (294) 3 / 16 (5,2) 1 / 8 (4) 9 / 16 (15) 2 1 / 8 (...
Page 56 - AUSBAU WICHTIGER TEILE; Ausbau von Bodenfilter-Abdeckung und Lampeneinheit-Abdeckung; Oberplatte und Rückplatte entfernen
56 XG-C50X AUSBAU WICHTIGER TEILE 1. Ausbau von Bodenfilter-Abdeckung und Lampeneinheit-Abdeckung 1-1. Bodenfilter-Abdeckung abtrennen.1-2. Die Sperrschraube von der Lampeneinheit-Abdeckung lösen und die Lampeneinheit-Abdeckung abnehmen.1-3. Den Tragegriff herausziehen.1-4. Die mit * markierte Stell...
Page 57 - Entfernen der Leiterplatten
57 XG-C50X 3. Entfernen der Leiterplatten 3-1. Die zwei Sperrschrauben vom Lampenfassung-Winkel entfernen. Den Lampenfassung-Winkel abtrennen.3-2. Die Ballast-Einheit anheben. Den Steckverbinder abtrennen, und die Ballast-Einheit abtrennen.3-3. Die Sperrschraube von der Leiterplatten-Einheit-Abdecku...
Page 58 - RÜCKSTELLUNG DES LAMPEN-TIMERS
58 XG-C50X RÜCKSTELLUNG DES LAMPEN-TIMERS 1 Das Netzkabel anschließen. • Das Netzkabel am Netzanschluss desProjektors anschließen. 2 Den Lampen-Timer zurückstellen. • W ä h r e n d , u n d a u f d e m Projektor gleichzeitig gedrückt wird, ON auf dem Projektor drücken. • “LAMPE 100%” erscheint und ze...
Page 59 - KURZBESCHREIBUNG DER OPTIK-EINHEIT
59 XG-C50X KURZBESCHREIBUNG DER OPTIK-EINHEIT Layout für richtige Einrichtung der optischen Komponenten und Teile (Draufsicht) Projektionslinse Relaislinse 3 Relaislinse 2 Relaislinse 1 M5 Al-vergüteter Spiegel B M4 Al-vergüteter Spiegel R Fliegenauge-Objektiv (Ausgang) Reflektor B Reflektor G Refle...
Page 60 - Einstellen der Spiegel
60 XG-C50X Einstellen der Spiegel Diese Einstellung ist erforderlich, wenn optische Teile des Optik-Mechanismus ersetzt wurden.1. Die Flachkabel von allen LCD-Platten abtrennen.2. Die Lampe einschalten.3. Ein Weißlichtbild projizieren und prüfen, ob ein Farbstich in einer Richtung vorhanden ist. Fal...
Page 61 - Ersetzen der Prismen-Einheit
61 XG-C50X Ersetzen der Prismen-Einheit 1. Die vier Sperrschrauben entfernen, und die Prismen-Einheit aus der Optik-Einheit nehmen.2. Die Prismen-Einheit durch die neue ersetzen. Den obigen Schritt 1 in umgekehrter Reihenfolge ausführen. Hinweis: Auch wenn nur eine der LCD-Platten defekt ist, ist es...
Page 62 - Freigabe der Systemsperre
62 XG-C50X Freigabe der Systemsperre Das Gerät einschalten. Wenn die Systemsperre aktiviert wird, erscheint die System-Nullstellungsanzeige. Danach sind die folgenden Tasten in der vorgeschriebenen Reihenfolge zu betätigen. MENU → ENTER → ENTER → MENU → UNDO → UNDO → MENU Zuerst die MENU-Taste drück...
Page 63 - ELEKTRISCHE EINSTELLUNG
63 XG-C50X ELEKTRISCHE EINSTELLUNG 1 Initialisieren vonEEPROM 1. Die Betriebsstromversorgungeinschalten (die Lampeleuchtet auf), und dasSystem 15 Minuten langwarmlaufen lassen. Nr. Einstellgegenstände Einstellbedingungen Einstellverfahren 1. Die folgenden Einstellungen vornehmen. S2601 drücken, um a...
Page 68 - Einstellung der PC-Schnittstelleneinheit
68 XG-C50X Einstellung der PC-Schnittstelleneinheit 1. Initialisieren von EEPROM 1) SW2801 drücken, um auf Prozessmodus zu schalten. 2) S1 im SSS-Menü ausführen. (Mit S1 wird die Platine alleine initialisiert. Nicht S2 ausführen, oder alle Justierdaten, ausgenommen die für PC-Schnittstelle, werden i...
Page 72 - FEHLERSUCHTABELLE
72 XG-C50X FEHLERSUCHTABELLE Ja Ja Nein Nein Nein Ja Nein Nein Yes Ja Ja Die Lampe leuchtet nicht auf. Netzschalter einschalten. Ist ein Entladegeräusch von der Lampe hörbar? Die Lampe wieder in die Fassungbringen. Lampe wechseln. Läuft das Ballast-Kühlgebläse? Liegt DC 280 V/400 V Spannung zwischen...
Page 79 - FEHLERSUCHTABELLE für PC I/F EINHEIT
79 XG-C50X FEHLERSUCHTABELLE für PC I/F EINHEIT Nein Ja 0 Überprüfen der PC-Platine Wird das Benutzermenü angezeigt? Die Bildschirmanzeige überprüfen. Den RGB-Eingang überprüfen. Den Komponenteneingang überprüfen. Den Videoeingang überprüfen. Ende
Page 91 - BLOCK DIAGRAM/BLOCKCHALTBILD
93 XG-C50X 92 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H BLOCK DIAGRAM/BLOCKCHALTBILD
Page 92 - OVERALL WIRING DIAGRAM/GESAMTSCHALTPLAN
95 XG-C50X 94 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H OVERALL WIRING DIAGRAM/GESAMTSCHALTPLAN
Page 93 - VOLTAGE MEASUREMENT CONDITION:; IMPORTANT SAFETY NOTICE:; SICHERHEITSANMERKUNGEN:; WICHTIGE SICHERHEITSANMERKUNGEN:
96 XG-C50X DESCRIPTION OF SCHEMATICDIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 230V. Signals are fed by a colour barsignal generator for servicing purpose and the abovevoltages are measured with a 20k ohm/V tester. WAVEFORM MEASUREMENT C...
Page 105 - KEY UNIT / SCHLÜSSELEINHEIT
119 XG-C50X 118 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H Ë KEY UNIT / SCHLÜSSELEINHEIT
Page 125 - INPUT UNIT; ERSATZTEILLISTE; PARTS LIST
148 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY. RLCDPA007WJZZ – LCD Module Unit, Red — RLCDPA008WJZZ – LCD Module Unit, Green — RLCDPA009WJZZ – LCD Module Unit, Blue — NOTE: LCD PANEL ...
Page 127 - OUTPUT UNIT
150 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X DUNTKB170DE01 INPUT UNIT(Continued) DUNTKB171FE01 OUTPUT UNIT INTEGRATED CIRCUITS IC302 VHiLV4053AT-1Y J SN74LV4053APWR AE IC303 VHiBA3530FS-1Y J BA3530FS-E1 AM IC1101 VHiCXA7000R-1Q J CXA7000R AZ IC1102 VHiCXA7000...
Page 133 - KEY UNIT
156 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X DUNTKB171FE01 OUTPUT UNIT(Continued) R7068 VRS-CA1JF100JY J 10 1/16W Metal Oxide AA R7069 VRS-CB1JF100JY J 10 1/16W Metal Oxide AA R7070 VRS-CY1JF100JY J 10 1/16W Metal Oxide AA R7071 VRS-CY1JF103JY J 10k 1/16W Met...
Page 134 - AC INLET UNIT
157 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X DUNTKB173DE01 R/C RECEIVER UNIT CAPACITORS C5591 VCEASM0JW107MY J 100 6.3V Electrolytic AC C5592 VCKYCY1EF104ZY J 0.1 25V Ceramic AA RESISTORS R5591 VRS-CY1JF471JY J 470 1/16W Metal Oxide AA R5592 VRS-CY1JF220JY J ...
Page 135 - FAN UNIT
158 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X RUNTKA026WJZZ FAN UNIT INTEGRATED CIRCUITS IC381 VHiTDA7056A-1 J TDA7056A AP IC7201 VHiPQ20WZ11-1Y J PQ20WZ1U AF IC7202 VHiPQ20WZ11-1Y J PQ20WZ1U AF IC7203 VHiPQ20WZ11-1Y J PQ20WZ1U AF IC7204 VHiPQ20WZ11-1Y J PQ20W...
Page 136 - POWER UNIT
159 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X RDENCA011WJZZ POWER UNIT INTEGRATED CIRCUITS IC701 95KUCB0237AZ J MIP290 IC702 95KUCY0006AM J UPC1093T AG IC703 95KUCY0136AZ J FA5501N IC704 95KUCY0021AK J M5233FP AF IC705 95KUCC0013DZ J UPC78N12H AM IC706 95KUCY0...
Page 141 - CABINET AND MECHANICAL PARTS
6 5 4 3 2 1 A B C D E F G H 164 XG-C50X CABINET AND MECHANICAL PARTS D F 4-1 4 E 29 13 3-22 3-21 3-27 3-27 3-4 3-1-5 3-1-4 3-14 3-25 3-1-7 3-11 3-12 3-12 3-30 3-15 3-1-8 3-16 20 3-13 3-1-6 3-1-1 3-7 3-19 3-2 3-8 3-3 35 25 51 34 3-1-2 3-9 3-24 3-28 3-17 3-2-1 3-2-2 4-2 3-23 9 40 3-25 3-29 3-6 3-1 3-1...
Page 145 - OPTICAL MECHANISM PARTS
168 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X OPTICAL MECHANISM PARTS 5 CCHSKA001WJ01 J Optical Mechanism Unit FX 5-1 Not Available – Intake Duct Ass'y — 5-1-1 LANGKA009WJFW J IC Fan Angle AH 5-1-2 LHLDW1037CEZZ J Wire Holder, x1 AA 5-1-3 LHLDW1182CEZZ J Cable...
Page 146 - SUPPLIED ACCESSORIES
169 Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code XG-C50X SUPPLIED ACCESSORIES GCOVDA001WJZZ J Dust Cover AL PFiLDA005WJZZ J Extra Air Filter AF å QACCB5024CENA J Power Cord(XG-C50XK) AZ å QACCDA010WJPZ J Power Cord AR (for U.S., Canada, etc) å QACCDA012WJPZ J Power Cord(...
Page 147 - PACKING OF THE SET/VERPACKEN DES GERÄTS; Front; Packing Case
XG-C50X 170 PACKING OF THE SET/VERPACKEN DES GERÄTS Front Packing Case Polystyrene Cover Buffer Material Packing Case,for Accessories Remote Control Lens Cap Remote Control"AA" size Battery (2pcs)Power CordRGB CableUSB CableComputer Audio CableDIN-D-sub RS-232C AdaptorExtra Air FilterDust Co...
Page 149 - COPYRIGHT © 2002 BY SHARP CORPORATION
XG-C50X COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced,stored in a retrieval system, or transmitted inany form or by any means, electronic, mechanical,photocopying, recording, or otherwise, withoutprior written permission of the publisher. SH...