Page 2 - Manual Scope; Contents; Specifications
2 E This guide contains instructions regarding operation, settings, and similar details.For instructions regarding connection and installation, refer to the included Operation Manual. Manual Scope - Microsoft, Windows and Internet Explorer are registered trademarks of Microsoft Corporation. - HDMI, ...
Page 3 - Front view; Part Names; Rear view; is attached
3 E n Front view 2 3 4 5 1 1. LCD panel2. Remote control sensor3. Input switch (See page 5.) 4. Power switch5. Power LED TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. Part Names n Rear view When the PN-ZB01 (optional) is attached 1 18 17 16 15 19 7 ...
Page 5 - Basic Operation
5 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video Audio PC D-SUB PC D-sub input terminal Audio input termi...
Page 6 - WIDE; NORMAL; Dot by Dot
E 6 Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC...
Page 7 - Menu Items; Displaying the menu screen; Example of operation; Menu screen display
7 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 10 to 13 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being disp...
Page 8 - List of menu items; Menu
E 8 Menu Items List of menu items The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached. ○: Item is available, -: Item is not available. Menu Item PN-ZB01 (optional) Not attached Attached SCREEN AUTO ○ ○ CLOCK ○ ○ PHASE ○ ○ H-POS ○ ○ V-POS ○ ○ H-SIZE ○ ○ V-SIZE...
Page 10 - Menu item details; SCREEN
E 10 Menu item details The menu will differ depending on the input mode. n SCREEN AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to dis...
Page 11 - AUDIO; SETUP
E 11 n AUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. Select “ON” and then press . n SETUP OSD H-P...
Page 13 - Dual screen display
E 13 Menu Items n PIP/PbyP PIP MODES Sets the display method.OFF .........Displays one screen.PIP ...........Displays a sub screen inside a main screen.PbyP ........Displays a main screen and a sub screen in a line.PbyP2 ......Displays a main screen which measures 1280 pixels in the longest directio...
Page 14 - In horizontal orientation; ZOOM2 SPECIAL SETTING
E 14 Menu Items n Enlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 moni...
Page 15 - or
E 15 n SCHEDULE You can set the time to switch the monitor on and off. Set this function with “SCHEDULE” in the OPTION menu. (See page 12.) SCHEDULE No. POWER DAY OF THE WEEK TIME INPUT XXXX/XX/XX XXX XX:XX:XX (2) OK…[MENU] 1 9 2 0 x 1 0 8 0 V: 60 Hz H: 67.5 kHz (1) (3) (4) (5) PC D-SUB 1. Press or ...
Page 16 - Adjustments for PC screen display; Automatic adjustment; Screen display for adjustment
E 16 n ADVANCED items (AV input) (See page 10 for additional Menu item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images on video.Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital c...
Page 18 - PC connection; Daisy chain connection...; Advanced operation; Communication conditions; Command format
18 E Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC.You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 19), you can make input mode selection/adjustment or can ...
Page 19 - Response code format; When a command has been executed correctly; When a command has not been executed; If execution of the command is taking some time; Communication interval; ID numbers
E 19 Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. * If an ID number has been assigned O K SPC 0 0 1 ID number of responding monitor Space (20 H ) Return...
Page 20 - Commands for ID control; IDST; IDSL; IDCK
E 20 Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST ......... A monitor receiving this command sets its own ID number in the p...
Page 21 - Repeater control; Setting of the GAMMA user data; To transfer the GAMMA user data; Saving the GAMMA user data
E 21 Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Examp...
Page 22 - RS-232C command table; How to read the command table; Power control/Input mode selection
E 22 RS-232C command table How to read the command table Command: Command field (See page 18.) Direction: W When the “Parameter” is set in the parameter field (see page 18), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obta...
Page 23 - PICTURE menu; AUDIO menu
E 23 PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 When the input mode is PC D-SUB, PC RGB. - ○ ○ CONTRAST CONT WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. ○ BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. TINT TINT WR 0-60 0-60 CO...
Page 24 - SETUP menu
E 24 SETUP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) OSD H-POSITION OSDH WR 0-100 0-100 ○ ○ ○ OSD V-POSITION OSDV WR 0-100 0-100 MONITOR (for PN-E421 only) STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT ○ MONAURAL AUDIO MONO WR 0-1 0-1 0: OFF, 1: ON ○ LANGUAG...
Page 25 - OPTION menu
E 25 OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DATE/TIME SETTING DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Time, EE: Minute ○ ○ ○ SCHEDULE SC01-SC08 WR ABCDEFFGGH ABCDEFFGGH Schedule of a specified number A: Schedule 0= Not e...
Page 27 - Initialization/Functional Restriction Setting (FUNCTION) menu
E 27 PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 ○ ○ ○ PIP SIZE MPSZ WR 1-12 1-12 ○ PIP POS THE LONGEST DIRECTION MHPS W 0-100 ○ R 0-100 ○ THE SHORTEST DIRECTION MVPS W 0-100 ○ R 0-100 ○ ...
Page 28 - Others; Commands for setting of the GAMMA user data
E 28 Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 ○ ○ ○ SCREEN SIZE (AV) WIDE WR 1-5 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot ○ VOLUME VOLM WR 0-31 0-3...
Page 29 - Initializing personal information; Settings to connect to a LAN; ■ To set on the monitor; DHCP CLIENT
29 E When the PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category ...
Page 30 - ■ To set from a PC; Set up process; (3) Configuring the monitor’s LAN settings
30 E 30 ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC(2) Specify the PC’s IP address (3) Configure the monitor’s LAN settings (1) Connecting your monitor to a PC Connect a commercially available crosso...
Page 31 - Controlling with a PC; ■ Basic operation
31 E 31 5. Click on “LAN SETUP” under NETWORK. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set ...
Page 32 - ■ INFORMATION; ■ CONTROL; ■ ADJUSTMENT
32 E 32 ■ INFORMATION Information about this monitor appears. ■ CONTROL You can control the operations corresponding to the buttons ( ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of...
Page 35 - DAY OF THE WEEK; TIME
35 E 35 ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notification e-mail to. CONDITION Specify the conditions to send mails. When you check P...
Page 36 - ■ SNMP; ■ SERVICE & SUPPORT
36 E 36 Controlling the Monitor with a PC (LAN) ■ SNMP You can configure settings related to SNMP. SNMP SETTING Set whether to enable or disable SNMP. VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Set the name of the community required for the access. USER 1 to 3 Set the...
Page 37 - Troubleshooting; Power LED flashes red.
37 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED il...
Page 38 - Product Specifications
38 E Specifications n Product Specifications Model PN-E471 PN-E421 LCD component 47" Class [46-15/16 inch (119.3cm) diagonal] TFT LCD 42" Class [42-1/16 inch (106.7cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.542 mm (H) × 0....
Page 42 - RS-232C input terminal pins
42 E Specifications n PC/AV DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot-plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.C. 20 N.C. ...
