Page 3 - IMPORTANT INFORMATION; RISK OF ELECTRIC; CAUTION
3 E IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFI...
Page 4 - SAFETY PRECAUTIONS; DEAR SHARP CUSTOMER
4 E Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause pe...
Page 6 - TIPS AND SAFETY INSTRUCTIONS
6 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness....
Page 7 - Supplied Components; System Requirements; Touch Panel; Contents
7 E For information on the Pen Software, see the Pen Software Operation Manual. Supplied Components If any component should be missing, please contact your dealer. Liquid Crystal Display Monitor: 1 Power cord: 1 CD-ROM (Utility Disk): 1 Setup Manual: 1 Touch pen: 1 * SHARP Corporation hold...
Page 8 - Front view; Part Names; Rear view
8 E n Front view 1 1. Power LED (See page 13.) Part Names n Rear view 3 4 2 1 4 78 9 10 11 5 12 6 1. Flap (See page 12.) 2. VESA holes (See page 24.) 3. Anti-theft hole ( ) Allows the monitor to be secured using a commercially available anti-theft lock. The anti-theft hole is compatible with Kensing...
Page 9 - Connecting Peripheral Equipment; Connection with a PC; Inputting video and audio; Binding Cables
9 E Connecting Peripheral Equipment Caution • Be sure to turn off the power and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Do not forcibly bend or apply force to cables. Doing so may result in wire break...
Page 10 - Using the touch panel; Connecting the monitor to a power source
10 E n Using the touch panel To use the touch panel, connect the monitor to a USB port on a PC using the supplied USB cable. Micro-USB terminal Supplied USB cable To USB port on PC Check the orientation of the connector and insert it horizontally as far as it will go. Connecting Peripheral Equipment...
Page 11 - Installation; Standing position; Assembling the stand
11 E Installation The monitor can be installed in three different ways. Standing position Place the monitor on the supplied stand. Caution • The stand is for use in landscape orientation. It cannot be used for portrait orientation. n Assembling the stand 1. Insert the back into the front. Align the ...
Page 12 - Disassembling the stand; Pen writing position; Horizontal position
12 E n Disassembling the stand 1. Remove the bottom cover. Push the tabs in towards the center and pull. Bottom cover Tabs 2. Remove the back from the front. Depress the button on the front and slide the back across, then pull the back up. Front Back Button Pen writing position Place the monitor at ...
Page 13 - Turning on the power; Turning off the power
13 E Turning on the power 1. Press the POWER button. Power LED Press POWER button The power LED turns on. 2. Turn on the PC. The screen appears. Status Status of the monitor Green lit Signal input Orange lit No signal input Caution • When switching the POWER button off and back on, always wait for a...
Page 14 - Touch Action; Touch action modes; Common finger and touch pen actions
14 E Touch Action Touch action modes There are three touch action modes: finger/pen mode, pen- only mode, and finger-only mode. These modes can be changed on the menu screen. The monitor is set to finger/pen mode when shipped. Finger/pen mode In this mode, the screen can be touched with your finger ...
Page 15 - Finger actions
15 E Drag-and-drop Touch the screen with your finger/pen and move without lifting. When you have finished the movement, lift your finger/touch pen. Slide to pan With your finger/touch pen touching the screen, move it up and down to scroll the screen. Flicks Move your finger/touch pen in a flicking m...
Page 17 - Monitor Settings; Menu operations; Example of operation
17 E Monitor Settings Menu operations The monitor settings are configured by displaying the menu screen. The operations on this page are the basic operations. Caution • Do not turn off the power while the menu screen is displayed. Doing so may initialize the settings. • While the menu screen is disp...
Page 18 - Menu functions
18 E Monitor Settings Touch mode selection These icons switch the touch action mode. A ( ) mark is displayed at the top of the icon for the selected mode. The mode can be checked with the touch mark located at the upper-right portion of the screen. (See pages 19, 21) Finger/pen mode This icon switch...
Page 19 - SETUP Menu Details
19 E Monitor Settings SETUP Menu Details Position Position When the monitor is used in portrait orientation (power/menu button on the top), this icon moves the display position of the menu screen to the bottom of the screen. Mode Mode Normal This mode is suited to normal PC screen display. Pen Writi...
Page 20 - Locking operation
20 E Monitor Settings Prohibiting operations (operation lock) This function makes it possible to prohibit operations to turn the power off and to prohibit touch action on the screen. If an operation is attempted when the monitor is locked, a key mark is displayed for around 5 seconds. (See page 21) ...
Page 21 - Monitor status indicators
21 E Monitor Settings n Disabling operation lock 1. Press the MENU button. The menu screen is displayed. Press MENU button 2. While touching [Volume], touch [Finger-only mode] for at least 1 second. Operation lock is disabled. Monitor status indicators Monitor status is displayed at the top right of...
Page 22 - Troubleshooting
22 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord connected correctly? (See page 10.) • Is the power on? (See page 13.) There is a...
Page 23 - Product Specifications
23 E Specifications n Product Specifications Model LL-S201A LCD component 20" Class [19-1/2 inch (49.5cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 16.77 million colors Pixel pitch 0.225 mm (H) × 0.225 mm (V) Viewing angle 178° right/left/up/down (contrast ratio ...
Page 25 - DisplayPort input terminal pins; Supported frequency
25 E Specifications n HDMI input terminal pins (HDMI TM Connector) No. Function No. Function 1 TMDS data 2+ 11 TMDS clock shield 2 TMDS data 2 shield 12 TMDS clock- 3 TMDS data 2- 13 CEC 4 TMDS data 1+ 14 N.C. 5 TMDS data 1 shield 15 SCL 6 TMDS data 1- 16 SDA 7 TMDS data 0+ 17 DDC/CEC GND 8 TMDS dat...
