Page 2 - IMPORTANT INFORMATION; TO REDUCE THE RISK OF FIRE OR ELECTRIC; CAUTION; TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE; to operate this equipment.
2 IMPORTANT:To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT ...
Page 3 - Trademarks; and LC logo mark are registered trademarks of SHARP Corporation.
3 • Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. "Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code that pro...
Page 4 - DEAR SHARP CUSTOMER; IMPORTANT SAFETY INSTRUCTIONS
4 Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order t...
Page 6 - It Makes A Difference How and Where You Use Your Flat Panel Display
6 IMPORTANT SAFETY INSTRUCTIONS Caring for the Liquid Crystal panel • Turn off the main power and unplug the AC cord from the wall outlet before handling.• Gently wipe the surface of the display panel with a soft cloth (cotton, fl annel, etc.). To protect the display panel, do not use a dirty cloth,...
Page 7 - QUICK REFERENCE; Experiencing HD images; QUICK INSTALLATION TIPS; POWER
7 30º 30º 30º 30º 17´ (5 m) QUICK REFERENCE Experiencing HD images To enjoy HD images on the TV, prepare the following: • Over-the-air broadcasting via HD quality antenna• HD cable/satellite subscription• HD compatible external equipment • For information on updating to HD programming, ask your cabl...
Page 8 - Antennas; NOTICE; Installing Batteries in the Remote Control Unit; Preparation; Cable
8 300-ohm twin-lead cable 75-ohm coaxial cable (round) 75-ohm coaxial cable IN OUT 300-ohm twin-lead cable VHFANTENNA UHFANTENNA Combiner (commercially available) 300/75-ohm adapter (commercially available) 300-ohm twin-lead cable (flat) 75-ohm coaxial cable (round) Cable TV lead-In Coaxial cable(co...
Page 9 - Part Names
9 Part Names TV (Front) OPC indicator (See page 17.) OPC sensor * (See page 17.) POWER indicator (See page 11.) Remote control sensor TV (Rear/Side) POWER button MENU button INPUT button Channel buttons( CH U / V ) Volume buttons( VOL k / l ) RS-232C terminal DIGITAL AUDIOOUTPUT terminal INPUT 7 ter...
Page 10 - Connecting to External Equipment
10 Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 14.) For connecting the TV to external equipment, use commercially available cables. ...
Page 11 - Turning On/Off the Power; Watching TV; Initial Setup
11 Turning On/Off the Power Press POWER on the TV or on the remote control unit to turn the power on. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) • The initial setup starts when the TV powers on for the fi rst time. If the TV has been turned on before...
Page 12 - Direct Button Operation
12 Direct Button Operation Changing Volume You can change the volume by pressing VOL k / l on the TV or on the remote control unit. To increase the volume, press VOL k . To decrease the volume, press VOL l . 20 Audio status Output device Output Select Fixed Variable Speaker Variable sound Mute When ...
Page 13 - AV MODE; Operating On-Screen Display Menu; FREEZE
13 AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE . Current AV MODE displays. Press AV ...
Page 14 - DISPLAY
14 Direct Button Operation ⑬ INPUT To view external source images, select the input source using INPUT on the remote control unit or on the TV. 1 Press INPUT . A list of selectable sources appears. 2 Press INPUT again or press a / b to select the input source. An image from the selected source autom...
Page 16 - On-Screen Display Menu Operation; On-Screen Display Menu; LCFONT embedded
16 ENTER : Select : Enter MENU : Exit RETURN : Back The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen. 1 Item displayed in yellow • This indicates the item currently selected.• Press ENTER to go to the adjustment screen for ...
Page 17 - Picture Menu; OPC Setting; Advanced Picture Setting
17 On-Screen Display Menu Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: White with bluish tone Mid-High:Middle:Mid-Low:Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color tempera...
Page 18 - Audio Menu; Surround; Power Control Menu; Power Saving
18 On-Screen Display Menu Digital Noise Reduction Produces a clearer video image. Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: Select a desired level for viewing a clearer video image. Off: No adjustment. "Digital Noise Reduction" is not available during PC form...
Page 19 - Setup Menu
19 On-Screen Display Menu No Operation Off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute."Disable" is the factory preset...
Page 20 - Position; Language
20 On-Screen Display Menu Auto Sync.(for Analog PC Input Mode Only) For automatically adjusting the PC image. Yes: Auto Sync. starts and "Now adjusting the image." displays. No: This function does not work. When "Auto Sync." is successful, "Completed" displays. If not, "A...
Page 23 - Option Menu
23 On-Screen Display Menu Option Menu Audio Only When listening to music from a music program, you can turn the screen off and enjoy audio only. On: Audio is output without screen image. Off: Both screen images and audio are output. The screen image will return to normal when a button (except those ...
Page 24 - Digital Setup
24 Channel Selecting Effect You can select whether to use transition effects when changing channels. Yes: A transition effect is used when the channel is changed. No: No function. Demo Mode You can select the image from several types of demo mode. 120Hz Demo 1/120Hz Demo 2/10 bit Demo/Feature Demo/A...
Page 26 - Appendix; Removing the Stand; Setting the TV on the Wall
26 Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to ...
Page 27 - Troubleshooting
27 Troubleshooting Problem Possible Solution • No power • Check if you pressed POWER on the remote control unit. Page 11 If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? Page 7 • Has the power been turned on? Page 11 • Unit cannot be operated. • Ext...
Page 29 - RS-232C Port Specifi cations
29 Appendix ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication se...
Page 30 - Optional Accessory; Specifi cations
30 Item Model: LC-C6077UN Model: LC-C6577UM LCD panel Size 60 o Class (60 1 / 32 o Diagonal) 65 o Class (64 33 / 64 o Diagonal) Resolution 2,073,600 pixels (1,920 g 1,080) TV Function TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-13...
Page 31 - The secret number is; PC Compatibility Chart; Information on the Software License for This Product
31 • As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. The secret number is . CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 Select an item from the list bel...
Page 32 - SHARP ELECTRONICS CORPORATION
32 For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP. Calling for Service LIMITED WARRANTY SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION CONSUME...
