Sharp LC-60LE740E - Manual

3 Introduction Caring for the front panel • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front pane...

4 Supplied accessories Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2) Pages 6 and 8 Page 6 Stand unit ( x 1) Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) Page 5 Page 58 Initial setup guide (printed document) USB memory (operation manual) Important safety precautions (printed ...

5 Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to foll...

6 Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) bat...

7 TV (front/side view) Illumination LED* 1 Remote control sensor (Page 6) OPC sensor (Page 31) 3D infrared emitter* 2 a (Power) MENU (Menu) b (Input source) :r/s (Programme [Channel]) i+/- (Volume) I 3D mode: Blue illumination 2D mode: White illumination J This panel emits infrared signal towards th...

8 Remote control unit 4 5 3 6 78 10 11 12 9 2 1 14 13 15 16 1718 19 20 21 22 1 >a (Standby/On) (Page 18) 2 ATV Access conventional analogue TV mode. DTV Access digital TV mode. SAT Access satellite mode. RADIO DTV/SAT: Switch between radio and data mode. • When only data broadcasting (no radio br...

9 Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation — Connecting the TV p q o n • Place the TV close to the AC outlet, and keep the power plug within reach. • Product shape varies i...

11 Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. 1 Carefully insert the CI module in the CI slot with the contact side forward. 2 The logo on the CI module must be fa...

12 Quick guide Using the HOME screen You can easily launch this “HOME” screen to enjoy Internet connection and Home network functions and to perform settings for the TV. LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-r...

13 Using the Menu screen You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Display the Menu screen  Go to “HOME” > “TV Menu”. • You can also display the Menu screen with pressing the MENU bu...

14 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC ...

15 Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ; . Terrestrial Cable E Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. • To abort the initial au...

16 Searching for satellite broadcasts (740 series only) Press a/b to select “Satellite search”, and then press ; . Digital search Analogue search Satellite search • The antenna connection setting screen is displayed. Single satellite 2 satellites on toneburst switchbox Max. 4 satellites on DiSEqC mu...

17 Checking signal strength and channel strength (DVB-T/T2* 1 /C/S* 2 / S2* 2 ) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. I 741 series only J 740 seri...

18 Daily operation Turning on/standby the power Turning on the power Press a on the TV or >a on the remote control unit. Standby mode Press a on the TV or TV a on the remote control unit when TV is on. • The TV enters standby mode and the image on the screen disappears. • Weak electric power is s...

19 Selecting a sound mode E DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) STEREO L/R L R LR CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed. Audio (EN...

20 EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations,...

21 Selecting a programme using EPG The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG . Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE • You can also display the EPG screen from “HOME” > “TV ...

22 Timer setup using EPG The TV can be switched to a programme or start recording for time shift at the set time. 1 Press EPG . 2 Press a/b/c/d to select the programme you want to set, and then press ; . Back to EPG Watch No Time shift Next 3 Press c/d to select “Watch” or “Time shift”, and then pre...

23 Introduction to connections The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or te...

24 Video connections HDMI connection Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted withou...

25 Connecting external devices SCART connection Y P B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recorder n  SCART cable (commercially available) NOTE • Regarding the external output: − You can record programmes viewed on the TV with an external recordi...

26 VIDEO connection Example of connectable devices E VCR E DVD player/recorder E Game console E Camcorder You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device. n  AV cable (commercially available) Audio connections Speaker/amplifier conn...

27 Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS ...

28 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS rec...

29 AQUOS LINK setup Basic operation Go to “HOME” > “TV Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is...

31 Picture settings Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Setup AV mode Picture OPC [Off] CH list :Back :Enter Menu Backlight Contrast Picture AV mode “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors lik...

32 Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This func...

34 Power save settings Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [On] ECO ECO picture control This function automatically detects the image source and decreases the...

35 View settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. Setup Quick start Auto installation View setting Channel settings CH list :Back :Enter Menu Individual setting View setting Auto installation The TV automatically detects and stores all available services in your area. Th...

36 Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. The selected ...

37 Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour s...

38 TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Quick start”. Item On The TV quickly starts up from standby. Around 15 W or more of p...

39 Individual setting — Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the ...

40 Optional features settings Go to “HOME” > “TV Menu” > “Setup” > “Option”. Setup Option for view Option 3D setup CH list :Back :Enter Menu AQUOS LINK setup Terminal setting Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies...

41 Terminal setting Option Audio select When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”. When selecting “HDMI 2” from t...

43 Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Illumination”. Item Off The LED is not illuminated. Standby The LED is illuminated while the TV is in standby mode. Watc...

44 Time shift + You can enjoy DTV/SAT recording or playback by connecting a commercially available USB storage device to the TV. • Time shift + does not work for ATV, external inputs, data broadcasts, radio broadcasts or network applications. Connecting a USB storage device Connect a commercially av...

45 How to operate Time shift + This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. CAUTION • Do not unplug the AC cord during time shift timer setting or time shift recording. • When the AC cord is unplugged and...

46 Time shift recording You can record the programme you are watching to the registered USB storage device. Starting time shift recording Press REC E . • The TV starts time shift recording. NOTE • You can also operate from the control panel by pressing CONTROL . • You cannot switch the channel or th...

47 Display information regarding time shift Channel display Channel information displays by pressing p on the remote control unit. Audio (ENG) STEREO VideoSubtitle Off Time shift playback available >> New information  The recording icon shows up when REC E is pressed and the TV is recording t...

48 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network...

49 Viewing enlarged photos Buttons for enlarged photo display operation(When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory. 6 Return to the thumbnail selection screen. 3D Switch between 2D and 3D modes. R button Rotate the photo by 90 degr...

50 Video mode Buttons for file selecting operations(When using USB media mode) Buttons Description ; When selecting a folder icon: Enter this directory. When selecting a video file: Play the video. a/b/c/d (Cursor) Select a desired item. 6 All*: Return to the previous screen. Folder*: Return to the ...

51 View setting DivX® setup This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration You can find your registration code on this menu. You need to r...

52 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminal  HDMI-certified cable (commercially available) PC HDMI 2 terminal*  ø 3.5 mm stereo minijack cable (commercially available)  DVI/HDMI cable (commercially available) * When using the HDMI 2 terminal, you must select the proper item i...

53 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from...

54 PC compatibility chart Resolution Horizontal frequency Vertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔ ✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔ ✔ ✔ WXGA 1,360 x 768 47.7 kHz 60 Hz ✔ ✔ ✔ SXGA 1,280 x 1,024 64.0 kHz 60 ...

55 PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial...

56 Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (STANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) I A V D * _ _ _ EXT 1 _ 3 (1 _ 3), HDMI 1 _ 4 (4 _ 7), P...

57 Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOT...

58 Wireless installation Use the wireless LAN USB adapter supplied with the TV. E Wireless connection overview  PC  Wireless LAN router/access point  Wireless LAN USB adapter (supplied)  Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space ar...

59 What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie from a video store* and much more. Net TV provides varie...

60 Net TV E Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ; . E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 400 : Adjust END : Exit 1 Select “Zoom”, and then pr...

61 You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN- 3DG20), sold separately. To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. NOTE • Re...

62 Display format for 3D and 2D images Image for input signals Selectable mode Description 3D mode (using the 3D glasses) 2D s 3D • Converts normal 2D images into 3D images. Side by Side • Creates 3D images from 3D images displayed side by side. The image is split into a left and right image, and th...

63 Viewing 3D images NOTE • Refer to the operation manual of the 3D glasses for details regarding usage. • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be detected automaticall...

64 Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D . 2 Press c/d to select “2D s 3D”, and then press ; . 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen...

65 3D setup E Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected. Item Yes When a 3D signal is detected,...

66 Troubleshooting — 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “No”? Press 3D to switch to 3D mode (Page 63). • If “3D auto change” is set to “Yes” but no 3D images are displayed, check the display format of the content being viewed. Some 3D imag...

67 Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed a on the TV. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the TV after first ...

68 Updating your TV via DVB-T/T2* 1 / C/S* 2 /S2* 2 Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. I 741 series only J 740 series only View setting Download setup Go to “HOME” > “TV Menu” > “Setu...

69 Information on the software licence for this product Information Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of vari...

70 Warning regarding basic use Cautions regarding use in high and low temperature environments • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature retur...

71 Software licences for Net TV This product includes the Opera™ browser. • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. • ...

72 Appendix Specifications Item LCD COLOUR TV (70 o /177 cm), LC-70LE740E LC-70LE740RULC-70LE741ELC-70LE741S LCD COLOUR TV (60 o /152 cm), LC-60LE740E LC-60LE740RULC-60LE741ELC-60LE741S LCD panel 177 cm (70 o ) X-Gen panel 152 cm (60 o ) X-Gen panel Resolution 1,920 x 1,080 x 3 dots Video colour sys...

73 Specifications (Wireless LAN USB adapter) Product name Dual Band 802.11n USB2.0 adapter Standard IEEE 802.11a/b/g/n Host interface USB2.0 Frequency band 2412 _ 2484 MHz 5150 _ 5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2...

74 Environmental specifications Item 70 inch models 60 inch models I On-mode (W) (in home-mode) 135 W 100 W J Energy-Save-Mode (W) Advanced 96 W 75 W K Standby-Mode (W) 0.1 W 0.1 W L Annual Energy Consumption (kWh) 197 kWh 146 kWh L Annual Energy Consumption Energy-Save-Mode (kWh) Advanced 140 kWh 1...

76 Appendix Dimensional drawings LC-70LE740ELC-70LE740RULC-70LE741ELC-70LE741S (400) (190) (400) (536) (865.62)* 1 (865,62)* 1 (1538.88)* 1 (1538,88)* 1 (1613) (1008) (975) (538) (51.0) (51,0)* 2 (89.0) (89,0) (136) (114) (215) (333) I Active area J Thinnest part (except of terminal height) NOTE • D...

77 Appendix EU Energy Label for Televisions On 30 November, 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of televisions. The Regulation entered into force on 20 December 2010 and applies in all Member States. Manufacturers...