Sharp LC-60LE636E - Manual

3 Introduction Caring for the front panel • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front pane...

4 Supplied accessories Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2) Pages 6 and 8 Page 6 Stand unit ( x 1) Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) Page 5 Page 60 Initial setup guide (printed document) USB memory (operation manual) Important safety precautions (printed ...

5 Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to foll...

6 Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) bat...

7 TV (front/side view) Illumination LED Remote control sensor (Page 6) OPC sensor (Page 32) TV (rear view) USB 3 ( WIRELESS LAN) port USB 2 (HDD) port ETHERNET (10/100) terminal Satellite antenna terminal (635 series only) Antenna terminal DIGITAL AUDIO OUTPUT terminal HDMI 2/PC AUDIO (L/R) jack* 1 ...

8 Remote control unit 6 7 5 4 3 8 9 10 12 13 14 11 2 1 16 15 17 18 1920 21 22 23 24 1 >a (Standby/On) (Page 19) 2 ATV Access conventional analogue TV mode. DTV Access digital TV mode. SAT Access satellite mode. RADIO DTV/SAT: Switch between radio and data mode. • When only data broadcasting (no r...

9 Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation - Connecting the TV p q o n • Place the TV close to the AC outlet, and keep the power plug within reach. • Product shape varies i...

10 3. Watch TV - Daily operation 1 Turn on/off the TV (Page 19) • You can turn on/off the power using both the remote control and the TV. 2 Switch between digital, satellite and analogue broadcast (Page 19) 3 Change channels (Page 19) • You can also select a channel from “Menu” > “CH list”. 4 Sel...

11 Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. 1 Carefully insert the CI module in the CI slot with the contact side forward. 2 The logo on the CI module must be fa...

12 Quick guide Using the Menu screen You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clear...

13 Using Software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Cancel SP Delete Clear Cursor Left Caps Char.Set Cursor Right 1 8 7 6 2 3 4 9 10 11 5 1 Char. Set Changes character set into the alphabet, numbers, symbols, etc. 2 Caps Changes characters to capital/...

14 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC ...

15 Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ; . Terrestrial Cable E Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. • To abort the initial au...

16 Searching for satellite broadcasts (635 series only) Press c/d to select “Yes”, and then press ; . Yes No • If you do not perform “Satellite search” setting, select “No”, and then press ; . • The current DVB-S/S2 setting screen is displayed. Next other Satellite LNB FrequencyLow High Satellite Sy...

18 Checking signal strength and channel strength (DVB-T/T2* 1 /C/S* 2 / S2* 2 ) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. I 636 series only J 635 seri...

19 Daily operation Turning on/standby the power Turning on the power Press < on the TV or >a on the remote control unit. Standby mode Press < on the TV or TV a on the remote control unit when TV is on. • The TV enters standby mode and the image on the screen disappears. • Weak electric powe...

20 Selecting a sound mode E DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) STEREO L/R L R LR CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed. Audio (EN...

21 EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations,...

22 Selecting a programme using EPG The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG . Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE • You can also display the EPG screen from “Menu” > “EPG...

23 Timer setup using EPG You can switch to a programme at a set time. 1 Press EPG . 2 Press a/b/c/d to select the programme you want to set, and then press ; . Back to EPG Watch No Programme info. Next 3 Press c/d to select “Watch”, and then press ; . • If you select “No”, the TV returns to the EPG ...

24 Introduction to connections The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or te...

25 Video connections HDMI connection Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted withou...

26 Connecting external devices SCART connection Y P B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recorder n  SCART cable (commercially available) NOTE • Regarding the external output: − You can record programmes viewed on the TV with an external recordi...

27 VIDEO connection Example of connectable devices E VCR E DVD player/recorder E Game console E Camcorder You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device. n  AV cable (commercially available) Audio connections Speaker/amplifier conn...

28 Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS ...

29 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS rec...

30 AQUOS LINK setup Basic operation Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mod...

32 Picture settings Go to “Menu” > “Setup” > “Picture”. Setup AV mode Picture OPC [Off] CH list :Back :Enter Menu Backlight Contrast Picture AV mode “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightne...

33 Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This function increases ...

35 Power save settings Go to “Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [On] ECO ECO picture control This function automatically detects the image source and decreases the power consumpt...

36 View settings Go to “Menu” > “Setup” > “View setting” Setup Quick start Auto installation View setting Channel settings CH list :Back :Enter Menu Individual setting View setting Auto installation The TV automatically detects and stores all available services in your area. This function also...

37 Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. The selected ...

38 Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour s...

39 TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “Menu” > “Setup” > “View setting” > “Quick start”. Item On The TV quickly starts up from standby. 14 W or more of power consumption is re...

40 Individual setting - Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio lan...

41 Optional features settings Go to “Menu” > “Setup” > “Option”. Option for view EPG setup AQUOS LINK setup Terminal setting Setup Option CH list :Back :Enter Menu Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies with the type...

42 Selecting the WSS picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal Normal range keeping 4:3 or 16:9 aspect ratio. Panorama Wide image withou...

44 Screen effect settings Option Channel selecting effect This function shows a screen effect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. Option Programme title display This function allows you to display programme...

45 Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “Menu” > “Setup” > “Option” > “Illumination”. Item Off The LED is not illuminated. Standby The LED is illuminated while the TV is in standby mode. Watch The LED is il...

46 Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage • Storage device for time shift • USB media to enjoy photos, music and videos Co...

47 Time shift This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. 1 Press READY . • The TV starts temporary recording of the real time broadcast in the background. 2 Press I . • The TV shows the programme from t...

48 Examples of time shift usage When you move away from the TV for a while (press READY when you move away from the TV) Without time shift Away You miss the scene while you are away. With time shift Away You can watch the missed scene when you come back. When you want to watch the same scene again (...

49 Option Device registration You need to perform this function to register the USB storage device for the time shift. Go to “Menu” > “Setup” > “Option” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 46) for registering a USB storage device. NOTE • Only on...

50 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network...

51 Viewing enlarged photos Buttons for enlarged photo display operation(When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory. 6 Return to the thumbnail selection screen. R button Rotate the photo by 90 degrees to the left. G button Rotate th...

52 Music mode * This screen image is for the USB media mode. It may be slightly different in the Home network mode. Buttons for music mode(When using USB media mode) Buttons Description ; When selecting a music file: Play music. a/b/c/d (Cursor) Select a desired item. 6 When music is stopped: Return...

53 View setting DivX® setup This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration You can find your registration code on this menu. You need to register the TV ...

54 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminal  HDMI-certified cable (commercially available) PC HDMI 2 terminal*  ø 3.5 mm stereo minijack cable (commercially available)  DVI/HDMI cable (commercially available) * When using the HDMI 2 terminal, you must select the proper item i...

55 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from...

56 PC compatibility chart Resolution Horizontal frequency Vertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔ ✔ ✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔ ✔ ✔ WXGA 1,360 x 768 47.7 kHz 60 Hz ✔ ✔ ✔ SXGA 1,280 x 1,024 64.0 kHz 60 ...

57 PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial...

58 Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (STANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) I A V D * _ _ _ EXT 1 _ 3 (1 _ 3), HDMI 1 _ 4 (4 _ 7), P...

59 Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOT...

60 Wireless installation Use the wireless LAN USB adapter supplied with the TV. E Wireless connection overview  PC  Wireless LAN router/access point  Wireless LAN USB adapter (supplied)  Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space ar...

61 What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie from a video store* and much more. Net TV provides varie...

62 Net TV E Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ; . E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 400 : Adjust END :Exit 1 Select “Zoom”, and then pre...

63 Disclaimers and software licences for Net TV DISCLAIMERS • • • • • • This product includes the Opera™ browser. • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be...

64 Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the TV after fir...

65 Updating your TV via DVB-T/T2* Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. * 636 series only View setting Download setup Go to “Menu” > “Setup” > “View setting” > “Individual setting” &g...

66 Information on the software licence for this product Information Software licence You can read the software licences in this menu. Go to “Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software co...

67 Warning regarding basic use Cautions regarding use in high and low temperature environments • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature retur...

68 Appendix Specifications Item LCD COLOUR TV (60 o /152 cm), LC-60LE635E LC-60LE635RULC-60LE636ELC-60LE636S LCD panel 152 cm (60 o ) X-Gen panel Resolution 1,920 x 1,080 x 3 dots Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV function TV- standard Analogue CCIR (B/G, I, D/K, L/L’) Digi...

69 Specifications (Wireless LAN USB adapter) Product name Dual Band 802.11n USB2.0 adapter Standard IEEE 802.11a/b/g/n Host interface USB2.0 Frequency band 2412 _ 2484 MHz 5150 _ 5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2...

70 Environmental specifications Item I On-Mode (W) (HOME MODE) 101 W J Energy-Save-Mode (W) Advanced 75 W K Standby-Mode (W) 0.1 W L Annual Energy Consumption (kWh) 147 kWh M Annual Energy Consumptioning Energy-Save-Mode (kWh) Advanced 110 kWh I Measured according to IEC 62087 Ed. 2 J For further in...

72 Appendix Dimensional drawings LC-60LE635ELC-60LE635RULC-60LE636ELC-60LE636S (1329.12) *1 (1329,12) *1 (872) (839) (1383) (747.63) *1 (747,63) *1 (536) (470) (400) (52) (215) (230) (400) (149) (333) (72.0) (72,0) (26.4) (26,4) *2 I Active area J Thinnest part NOTE • Dimensions do not include protr...

73 Appendix EU Energy Label for Televisions On 30 November, 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of televisions. The Regulation entered into force on 20 December 2010 and applies in all Member States. Manufacturers...