Page 2 - or; IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face o...
Page 3 - OPERATION MANUAL; Dear SHARP customer; Important; Trademarks; ENGLISH
1 OPERATION MANUAL ENGLISH The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.The examples used throughout this manual are based on the LC-46LE700E model.LC-32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E, LC-32LU700S,...
Page 4 - Important safety precautions; NOTE; Introduction
2 Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chem...
Page 5 - Remote control unit
3 Remote control unit B (Standby/On) (Page 12) Buttons for useful operations m (Teletext) ATV: Display analogue teletext (Page 15).DTV: Select MHEG-5 and teletext for DTV (Page 15). k (Reveal hidden teletext) (Page 15) [ (Subtitle) Switch subtitle languages on/off (Pages 15 and 32). 3 (Freeze/Hold) ...
Page 6 - WARNING
4 TV (front view) 2 3 4 5 6 1 7 8 9 10 Blue illumination LED B (Standby/On indicator) OPC indicatorRemote control sensorOPC sensor a (Power button) @ (Menu button) b (Input source button) :r/s (Programme [channel] buttons) i+/- (Volume buttons) 123456789 10 TV (rear view) 1 2 6 8 11 12 14 13 15 16 1...
Page 7 - Supplied accessories; Attaching the stand unit; CAUTION; Preparation
5 Supplied accessories Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1) Product shape varies in some countries. For 32 inch models For 40/46/52 inch models Pages 3 and 6 Page 8 Page 8 Page 5 Operation manual (this publication)“AAA” size zinc-carbon battery ( x 2) ... Pa...
Page 8 - Inserting the batteries; Open the battery cover.; Close the battery cover.; Using the remote control unit; Cautions regarding the remote control unit
6 Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover. Insert two supplied “A...
Page 9 - Initial installation overview; Language setting; Country setting; Start searching; Quick guide
7 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Preparation Connect an antenna cable to the antenna terminal (Page 8). If necessary, insert a CA card into the CI ...
Page 10 - Before turning on the power; Supplying power to the antenna
8 Before turning on the power 2 * 1 Cable clamp (bundle the cables with the clamp) Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable Turn on ( ; ) the MAIN POWER switch on the left side of the TV. AC cord (product shape varies in some countries) The AC cord is supplied either with a ferrite core...
Page 11 - Initial auto installation; Digital broadcast setting; Searching for terrestrial broadcasts
9 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power Is the antenna cable connected?Is the AC cord p...
Page 12 - Searching for cable broadcasts; Analogue broadcast setting
10 Quick guide Searching for cable broadcasts To change each item to the appropriate settings: Press a/b to select the menu, and then press ; . Scrambled stations [Yes] [Channel] [None] Search methodStart frequencyNetwork IDSymbol rate 1Symbol rate 2QAM modulation 1QAM modulation 2ResetSearch start ...
Page 13 - Checking signal strength; Channel strength of DVB-T; Inserting the CA card into the CI module; Checking CI module information
11 Quick guide Checking signal strength and channel strength (DVB-T/C) If you install a DVB-T/C antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. Go to “MENU” > “Setup” > “Antenna setup...
Page 14 - Daily operation; ) the MAIN POWER switch on the; To standby mode; Changing channels; DTV mode; ATV mode; Watching TV
12 Daily operation Switching on/off Turning on/off the power Turn on ( ; ) the MAIN POWER switch on the left side of the TV (Page 4). Press a on the TV. Switch it off by pressing a on the TV. When turning off the power using a on the TV, EPG data will be lost. Standby mode To standby mode If the TV ...
Page 15 - EPG; Basic operation; EPG display settings; Display range setup; Genre icon setup
13 Watching TV EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic operation Press @ and the “MENU” screen displays. Press...
Page 16 - Selecting a programme using EPG; Useful functions
14 Selecting a programme using EPG Basic operation The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG . E Select Enter Back Exit AM PM Programme info. Search by genre Search by date Select a programme Select the time span Press c/d to sele...
Page 17 - Teletext; Turning teletext on/off; Press
15 Teletext What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programm...
Page 18 - Video connections; Example of connectable devices; When using the HDMI 2 terminal; Connecting external devices
16 Before connecting ... Be sure to turn off the TV and any devices before making any connections.Firmly connect a cable to a terminal or terminals.Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality...
Page 19 - SCART connection; Decoder; Controlling devices with SCART using AV Link
17 SCART connection Example of connectable devices Decoder E Decoder SCART cable Example of connectable devices VCRDVD player/recorder EE If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using a fully wired SCART cable. VCR Decoder SCART cable NOTE In cases when the ...
Page 20 - Component connection; VIDEO connection; Audio connections; After connecting; Digital audio output setting
18 Y P B ( C B) P R ( C R) Component connection Example of connectable devices VCRDVD player/recorder EE You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device. Y P B (C B ) L R P R (C R ) COMPONENT AUDIO A...
Page 21 - Controlling HDMI devices using AQUOS LINK; What you can do with AQUOS LINK; REC; REC STOP; AQUOS LINK connection; AQUOS LINK
19 Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE AQUOS LINK-compatible AQUOS AUDI...
Page 22 - AQUOS AUDIO speaker system; AQUOS BD player/AQUOS recorder; AQUOS LINK setup
20 Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system HDMI-certified cable Optical audio cable Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS recorder AQUOS LINK setup Basic operation ...
Page 23 - Operating an AQUOS LINK device; FWD; AQUOS LINK menu; Displaying “AQUOS LINK menu”; PLAY
21 Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Open the remote control unit’s flip cover. Press PLAY I to start playback of a title. See the right column, section Top menu/Title list if you want to start playback using ...
Page 24 - Display the MENU; LCFONT embedded; Exit the MENU screen; Select an item; Selecting in the MENU; Selecting options; LCFONT; Operation without a remote control unit; Menu operation
22 What is the MENU? You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.The “MENU” enables various settings and adjustments. Basic operation Display the MENU screen Press @ and the “MENU” screen displays. LCFONT embedded Picture OPC [Off] BacklightC...
Page 25 - Picture settings; Picture adjustments; Adjustment items; Advanced; Basic adjustment
23 Picture settings Picture OPC [Off] BacklightContrastBrightnessColourTintSharpnessAdvancedReset DYNAMIC Picture OPC Automatically adjusts the brightness of the screen. Item Off The brightness is fixed at the value set in “Backlight”. On Automatically adjusts. On:Display Displays the OPC effect on ...
Page 26 - AV MODE
24 100 Hz “100 Hz” technology provides superior solutions for digital display picture quality removing motion blur. NOTE This effect is greater on fast moving images.“100 Hz” will have no effect in the following cases.1) The type of signal received is a PC signal.2) An OSD is being displayed.3) Tele...
Page 27 - Audio settings; Automatic volume adjustment; Setting audio input
25 Audio settings Audio Treble [Off] BassBalanceSurroundBass enhancerReset DYNAMIC L30 R30 Audio Audio adjustment You can adjust the sound quality to your preference with the following settings. Selectable items c (Cursor) d (Cursor) Treble For weaker treble For stronger treble Bass For weaker bass ...
Page 28 - Power save settings; ECO; “Energy save” status icons; ECO
26 Power save settings ECO Energy save [ Standard] ECO picture control [On] No signal off [Disable] No operation offSleep timer [Disable] ECO ECO picture control This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchang...
Page 29 - Auto installation; Digital; Analogue search; Analogue; Programme setup; Programme setup; Additional search
27 Channel settings Auto installation Setup Auto installation The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installati...
Page 30 - Buttons for “Manual adjust” operation; Cable setting; Searching for; Manual search; Manual adjust
28 Basic adjustment Manual adjust Configure various settings for each service using the colour ( R / G / B ) buttons. Service no. Lock Service name Lock CH skip Old LCN CH skip Sort Press a/b to select the desired service. Press the colour button on the remote control unit corresponding with the ite...
Page 31 - Sort
29 Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. Start searching channels after selecting the colour syste...
Page 32 - Child lock; Enter the four-digit number as a PIN using; Other basic adjustments; Option; Key lock; Cancelling the lock; Quick start; Blue illumination
30 Password/Parental lock settings Setup Child lock Allows you to use a PIN to protect certain settings from being accidentally changed. NOTE PIN input is required when executing “Child lock”. The default PIN is “1234”. To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING...
Page 33 - Selecting the picture size; WSS; WSS signal 4:3 screen; Useful viewing functions
31 Selecting the picture size Selecting the WSS picture size automatically Setup WSS The “WSS” allows the TV to switch automatically among the different picture size. NOTE Use “WIDE MODE” if an image does not switch to the appropriate picture size. When the broadcast signal contains no “WSS” informa...
Page 34 - Adjusting image position; Language settings; OSD language; Selectable items; Switching subtitle languages; Off; Set “For hearing impaired” to “Yes”; EXAMPLE; st language; Switching the multi audio languages
32 Selecting the recording picture size manually Digital setup REC picture size You can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV. Setting to “4:3 TV” Setting to “16:9 TV” NOTE This function must be set before recording. Selecting the HDMI p...
Page 35 - Time display in channel information; Time and title display; Time display; Game play time; Programme title display
33 Display settings Channel display You can display the channel information by pressing p on the remote control unit. DTV mode ATV mode Audio (ENG) STEREO Video SubtitleNew information STEREO SubtitleNew information Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countr...
Page 36 - Input source settings; Repeat until the label is fully spelt out.; Skipping specified inputs; Colour system settings; Additional features; Other useful features
34 Setting when using external devices Input source settings Option Input select For setting the signal type of external equipment. Item EXT 1 Y/C, CVBS, RGB EXT 2 Y/C, CVBS NOTE If no (colour) image displays, try changing to another signal type. Check the operation manual of the external equipment ...
Page 37 - Connecting a USB device; USB Photo viewer/Music player; Photo mode
35 Connecting a USB device Connect an USB device to the TV as shown below. The TV automatically switches to the USB mode when a USB device is inserted in the USB terminal.Depending on the USB device, the TV may not be able to recognise the contained data.Use only alphanumeric characters for naming f...
Page 38 - Selecting the BGM; Slide show; Music mode; USB device compatibility
36 Slide show Selecting the BGM File name Time Playing: Slide show BGM: Buttons for slide show BGM select operation Buttons Description ; When selecting the folder icon with the 6 mark: Go back to the parent directory.When selecting a folder icon: Enter this directory.When selecting a music file: Pl...
Page 39 - PC; PC; Connecting a PC
37 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 HDMI-certified cable PC HDMI 2* DVI/HDMI cable ø 3.5 mm stereo minijack cable When using the HDMI 2 terminal, you must select the proper item in the “PC audio select” menu depending on the type of HDMI cable connected (refer to page 25 fo...
Page 40 - Adjusting the PC image manually; PC compatibility chart
38 Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. Setup Auto sync. NOTE When “Auto sync.” is succ...
Page 41 - RS-232C port specifications
39 RS-232C port specifications PC control of the TV When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed ...
Page 43 - Troubleshooting; Cautions regarding use in high and low temperature environments; CLEARING THE PIN; Appendix
41 Troubleshooting Problem Possible solution No power. • Turn on ( ; ) the MAIN POWER switch on the left side of the TV (Page 4). Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B . Is the AC cord disconnected?Check if you pressed a on the TV. •• ••...
Page 44 - Updating your TV via DVB-T; Downloading the software; Follow the screen prompts.; Information; Reset; Identification
42 Updating your TV via DVB-T Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. Digital setup Download setup Searching for updates* All countries except UK, Sweden and Italy are set to “No” for this funct...
Page 45 - Updating your TV via USB; Software update; The TV starts updating the system; Information on the software license for this product
43 Appendix Updating your TV via USB Setup Software update This function allows you to update to the latest software using a USB device. You must update the software through the USB terminal. To check the software version for the TV, use the URL shown on the back cover. CAUTION This function is avai...
Page 46 - Specifications
44 Specifications Item LCD COLOUR TV (32 o ), LC- 32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E, LC-32LU700S, LC-32LE705E, LC-32LE705S, LC-32LX705E, LC-32LU705E, LC-32LU705S LCD COLOUR TV (40 o ), LC- 40LE700E, LC-40LE700S, LC-40LX700E, LC-40LU700E, LC-40LU700S, LC-40LE705E, LC-40LE705S, LC-40LX70...
Page 48 - Environmental specifications
46 Environmental specifications Item 32 inch models 40 inch models 46 inch models 52 inch models I On-Mode (W) (HOME MODE) 60 W 72 W 89 W 98 W J Energy-Save-Mode (W) Advanced 54 W 70 W 81 W 92 W K Standby-Mode (W) 0.20 W 0.20 W 0.20 W 0.20 W L Off Mode (W) Power button 0.19 W 0.19 W 0.19 W 0.19 W MA...
Page 50 - End of life disposal
48 End of life disposal Appendix LC-LE705E_GB.indd 48 LC-LE705E_GB.indd 48 2009/10/09 14:13:27 2009/10/09 14:13:27
Page 52 - SHARP CORPORATION; PIN; OPERA
LC-32LE700E LC-32LE700SLC-40LE700E LC-40LE700SLC-46LE700E LC-46LE700SLC-52LE700E LC-52LE700S LCD COLOUR TELEVISIONLCD-FARBFERNSEHGERÄTTÉLÉVISEUR COULEUR À ÉCRANCRISTAUX LIQUIDES (LCD)TELEVISORE A COLORI LCDLCD-KLEURENTELEVISIETELEVISIÓN EN COLOR LCDTELEVISOR DE CRISTAL LÍQUIDO OPERATION MANUALBEDIEN...
