Page 3 - CONTENTS; GETTING STARTED; INSTALLATION
1 CONTENTS 1 GETTING STARTED INTRODUCTION 3 CAUTIONS 3 MAIN FEATURES 4 PART NAMES 6 OPERATION PANEL 7 2 INSTALLATION COPIER INSTALLATION 8 CAUTIONS ON HANDLING 9 CHECKING PACKED COMPONENTS AND ACCESSORIES 10 UNPACKING 10 REMOVING PROTECTIVE PACKING MATERIALS 11 INSTALLING THE TD CARTRIDGE 12 LOADING...
Page 4 - APPENDIX; INDEX
2 5 SUPPLIES AND USER MAINTENANCE TD CARTRIDGE REPLACEMENT 27 DRUM CARTRIDGE REPLACEMENT 28 USER MAINTENANCE 30 – Cabinet 30 – Original table and original cover 30 – Transfer charger 31 – When copier is not in use 32 6 COPIER TROUBLE? MISFEED REMOVAL 33 – A Misfeed in the paper feed area 34 – B Misf...
Page 5 - INTRODUCTION; CAUTIONS
3 1 Getting star ted 1 GETTING STARTED This chapter provides basic information for using the copier. INTRODUCTION This copier has been designed to provide intuitive operating ease while requiring a minimumamount of space. To get full use of all copier features, be sure to familiarize yourself with t...
Page 6 - SAFETY PRECAUTIONS; MAIN FEATURES; High-speed laser copying
4 1 Getting star ted CAUTIONS ● Place the copier on a firm, level surface. ● Do not install the copier in a humid or dusty location. ● When the copier is not used for long time, for example for consecutive holidays,turn the power switch off and remove the power cord from the outlet. ● When moving th...
Page 7 - Substantial copying functions; Scan once/ Print many; Environmentally friendly design
5 1 Getting star ted MAIN FEATURES Substantial copying functions ● Zoom copying from 50% to 200% in 1% increments can be performed. ● Continuous copying of maximum 99 sheets can also be performed. ● Automatic document feeding through the single pass feeder (SPF) can be performed. ● Toner save mode r...
Page 8 - PART NAMES
6 1 Getting star ted PART NAMES SPF exit area Original guides Feeding roller cover Documentfeeder tray Transfer charger TD cartridge lock release button TD cartridge Drum cartridge Drum cartridge handle Fusing unit release lever Charger cleaner Original table Operation panel Paper tray Front cover S...
Page 9 - OPERATION PANEL
7 1 Getting star ted OPERATION PANEL E x p o s u r e m o d e s e l e c t o r k e y a n dindicators Use to sequentially select the exposurem o d e s : AU TO, M A N UA L o r P H OTO.Selected mode is shown by a lit indicator.(p. 20) L i g h t a n d d a r k k ey s a n d ex p o s u r eindicators Use to a...
Page 10 - COPIER INSTALLATION; Do not install your copier in areas that are:
8 2 Installation 2 INSTALLATION Follow the installation procedure below to use the copier properly. COPIER INSTALLATION Improper installation may damage the copier. Please note the following during initial installationand whenever the copier is moved. If the copier is moved from a cool place to a wa...
Page 11 - CAUTIONS ON HANDLING; Do not touch the surface (green portion) of the drum cartridge.
9 2 Installation Be sure to allow the required space aroundthe machine for ser vicing and properventilation. A small amount of ozone is produced within the copier during operation. The emissionlevel is insufficient to cause any health hazard. NOTE: The present recommended long term exposure limit fo...
Page 12 - UNPACKING
10 2 Installation CHECKING PACKED COMPONENTS ANDACCESSORIES Open the car ton and check if the following components and accessories are included. Copier Power cord TD cartridge Drum cartridge (installed in copier) Operation manualPrinter driver (CD-ROM) Interface cable(IBM PC/AT or compatible compute...
Page 13 - REMOVING PROTECTIVE PACKING MATERIALS
11 2 Installation REMOVING PROTECTIVE PACKING MATERIALS 1 Remove all pieces of tape shown in the illustration below. Then open the original cover and remove protective materials , and . 2 Use a coin (or suitable object) to remove the screw. Store the screw in the paper tray because it will be used i...
Page 14 - INSTALLING THE TD CARTRIDGE
12 2 Installation INSTALLING THE TD CARTRIDGE 1 Open the side cover while pressing the side cover open button. 2 Remove the CAUTION tape from the front cover and remove the two protective pinsfrom the fusing unit by pulling the strings upward one at a time. Protective pins CAUTION tape 3 Push gently...
Page 15 - LOADING COPY PAPER (installing the paper tray)
13 2 Installation INSTALLING THE TD CARTRIDGE 5 Gently inser t the TD cartridge until it locks in place. 6 Close the front cover and then the side cover by pressing the round projections nearthe side cover open button. When closing the covers, be sure to close the front cover securely and thenclose ...
Page 17 - POWER TO COPIER
15 2 Installation LOADING COPY PAPER 6 Gently push the paper tray back into the copier. After loading copy paper, to cancel the blinking “P” without restar ting copying,press the clear ( ) key. The “P” in the display will go out and the ready ( ) indicator will light up. POWER TO COPIER 1 Ensure tha...
Page 18 - POWER ON; Initial settings of operation panel
16 2 Installation POWER ON Turn the power switch on the left side of the copier to the “ON” position. The ready ( ) indicator will light up and other indicators which show the initial settings of the operation panelwill also light up to indicate the ready condition. For the initial settings, see the...
Page 19 - MAKING COPIES; PAPER
17 3 Making copies 3 MAKING COPIES This chapter describes basic copying functions and some other copying functions using themanual bypass. PAPER For best results, use only paper recommended by SHARP. Type of paper Type of media Size Weight feeding Paper tray Standard paper Letter (8-1/2" x 11...
Page 20 - NORMAL COPYING
18 3 Making copies NORMAL COPYING This copier has two document input stations - a single pass feeder (SPF) for automatic documentfeeding and an original table for manual handling of documents. The SPF is designed to holdup to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14"...
Page 22 - Stream feeding mode; EXPOSURE ADJUSTMENT/PHOTO COPYING
20 3 Making copies NORMAL COPYING 5 Press the print ( ) key. ● To display the number of copies made in a continuous run, press the leftcopy quantity key. ● To stop copying in the middle of a run, press the clear ( ) key. Copying will stop and the number in the display will be reset to “0”. Stream fe...
Page 26 - SPECIAL FUNCTIONS; DESCRIPTION OF SPECIAL FUNCTIONS; Toner save mode; Auto clear; TONER SAVE MODE
24 4 Special functions SPECIAL FUNCTIONS DESCRIPTION OF SPECIAL FUNCTIONS This chapter describes the special functions of this copier. Use these functions as needed. Toner save mode (page 24) Reduces toner consumption by approximately 10%. Power save modes (page 25) The copier has two power save mod...
Page 28 - DISPLAYING TOTAL NUMBER OF COPIES
26 4 Special functions USER PROGRAMS 3 Press the print ( ) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of thedisplay. 4 Select the desired parameter using the right copy quantity ( ) key. The entered pa...
Page 29 - SUPPLIES AND USER MAINTENANCE; TD CARTRIDGE REPLACEMENT
27 5 Supplies and user maintenance 5 SUPPLIES AND USER MAINTENANCE This chapter describes how to replace the TD car tridge and the drum car tridge. Be sure to use only genuine SHARP par ts and supplies. TD CARTRIDGE REPLACEMENT The TD cartridge replacement required ( ) indicator will light up when t...
Page 30 - DRUM CARTRIDGE REPLACEMENT
28 5 Supplies and user maintenance TD CARTRIDGE REPLACEMENT 3 Install a new TD car tridge. To install the new car tridge, see page 12, INSTALLING THE TD CARTRIDGE . 4 Close the front cover and then the side cover by pressing the round projections nearthe side cover open button. The indicator will go...
Page 32 - USER MAINTENANCE; Cabinet; Original table and original cover
30 5 Supplies and user maintenance USER MAINTENANCE Proper care is essential in order to get clean, shar p copies. Be sure to take a few minutes toregularly clean the copier. Before cleaning, be sure to turn the power switch off and remove the powercord from the outlet. Do not use thinner, benzene o...
Page 33 - Transfer charger
31 5 Supplies and user maintenance USER MAINTENANCE Transfer charger If copies star t becoming streaky or blotchy, the transfer charger may be dirty. Clean the chargerusing the following procedure. 1 Turn the power switch off. 2 Open the side cover while pressing the side cover open button. 3 Take t...
Page 34 - When copier is not in use
32 5 Supplies and user maintenance When copier is not in use To prevent entry of dust and foreign matter, store the copier as follows. 1 Remove the power cord and secure the copier using tape (four locations). USER MAINTENANCE
Page 35 - MISFEED REMOVAL
33 6 Copier trouble? 6 COPIER TROUBLE? This chapter describes misfeed removal and troubleshooting. MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the copier will stop because of a misfeed.If a misfeed occurs when using the SPF, a number may appear in the display afte...
Page 36 - A Misfeed in the paper feed area; B Misfeed in the fusing area
34 6 Copier trouble? MISFEED REMOVAL A Misfeed in the paper feed area 1 Gently remove the misfed paper from the paper feed area as shown in the illustration.When blinks in the display and the misfed paper is not seen from the paper feed area, pull out the paper tray and remove the misfed paper. If t...
Page 38 - D Misfeed in the SPF
36 6 Copier trouble? 3 Rotate the feeding roller in the direction of the arrow and gently remove the misfedpaper from the exit area. Feeding roller 4 Raise the fusing unit release lever, close the front cover and then close the side coverby pressing the round projections near the side cover open but...
Page 40 - TROUBLESHOOTING
38 6 Copier trouble? TROUBLESHOOTING If any problem occurs, check the list below before contacting our Technical AssistanceDepartment. See page: 15 16 – – 18 24 24 40 20 30 20 Solution Copier does not operate. Blank copies Copier plugged in? Problem Possible cause Plug the copier into a grounded out...
Page 41 - STATUS INDICATORS
39 6 Copier trouble? STATUS INDICATORS When the following indicators light up or blink on the operation panel or the following alphanumericcodes appear in the display, solve the problem immediately referring to both the table belowand the relevant page. An original misfeed has occurred in the SPF. R...
Page 42 - AUTOMATIC EXPOSURE ADJUSTMENT
40 6 Copier trouble? AUTOMATIC EXPOSURE ADJUSTMENT The automatic exposure level can be adjusted to suit your copying needs. This level is set forcopying from the original table and copying from the SPF respectively. 1 When adjusting the automatic exposure level for copying from the SPF, place anorig...
Page 43 - SPECIFICATIONS
41 7 Appendix 7 APPENDIX SPECIFICATIONS Type Digital laser copier/printer, desk-top type Copy system Dry, electrostatic transfer Originals Sheets, bound documents Automatic original Up to 30 sheets feed (SPF) Original size Max. 10" x 14" (Max. 8-1/2" x 14" for SPF) Copy sizes 8-1/2&#...
Page 45 - SUPPLY PART NUMBERS AND STORAGE
43 7 Appendix SUPPLY PART NUMBERS AND STORAGE When ordering supplies, please use the correct par t numbers as listed below. Be sure to use only genuine SHARP par ts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies whichare designed, engineered, and tested to maximiz...
Page 46 - MOVING INSTRUCTIONS
44 7 Appendix MOVING INSTRUCTIONS When moving this copier, follow the procedure below. When moving this copier, be sure to remove the TD cartridge in advance. 1 Turn the power switch off and disconnect the power cord. 2 Open the side cover while pressing the side cover open button. Push gently on bo...
Page 49 - MEMO
Page 51 - For users in the USA
For users in the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WAR...
Page 52 - SHARP ELECTRONICS CORPORATION
PRINTED IN CHINA 2001J KS TINSE0677QSZZ SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135. www.sharp-usa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 SHARP CORPORATION
