Seiki SC-1000AU7DS - User Manual

Page 3 - CONTENTS

General Safety 4 Product Overview 8 Getting Started 11 Water Connection 12 How to Connect Safety Supply Hose 13 Drain Hose Connection 13 Water Outlet and Drain Connection 13 Positioning the Appliance 14 Electrical Connection 15 Starting a Wash Program 16 Instructions Loading the Dishwasher Guide 17 ...

Page 4 - IMPORTANT INFORMATION; GENERAL SAFETY

4 Read this manual thoroughly before you start using the Dishwasher. The safety precautions instructions reduces the risk of fire, electric shock and injury when cor-rectly complied to. Please follow all instructions and take notice of all warnings. ELECTRICAL SAFETY • Voltage: Plug the appliance to...

Page 6 - USAGE CONDITIONS AND RESTRICTIONS

6 GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.• This appliance is not t...

Page 7 - CLEANING AND MAINTENANCE

7 GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so. All other servicing is to be done by a qualified technician, or contact our support centre on 1300 296 699 for advice. • ...

Page 8 - PRODUCT OVERVIEW; Strong Wash

8 PRODUCT OVERVIEW CONTROL PANEL 1. Power Press this button to turn on your dishwasher, the screen lights up. 2. Delay Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hour. 3. Child...

Page 11 - GETTING STARTED

11 Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. The minimum measurements needed for this dishwasher installation are as below: GETTING STARTED

Page 16 - STARTING A WASH PROGRAM; LOADING THE DISHWASHER

16 STARTING A WASH PROGRAM * This program was used for testing the appliance to the Australian Standard AS/NZS 2007.1 with 10 place settings, Rinse aid settings on 6 and the upper basket with the upper set of wheels on the rail support. NOTE: Open the door slightly (50mm) to assist in drying after e...

Page 17 - INSTRUCTIONS

17 LOADING THE DISHWASHER For best performance, follow bellow guidelines: ATTENTION: BEFORE LOADING BASKETS Its not necessary to rinse all dishes before putting into dishwasher, though we suggest you scrape off any large amounts of leftover food and soften remnants of burnt food in pots and pans to ...

Page 27 - FAQs

27 FAQs Problem Possible Cause The dishwasher does not run The fuse is blown or circuit breaker is activated Replace the fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher. The power supply is not turned on. Make sure the dishwasher is powered on ...

Page 28 - USEFUL INFORMATION

28 USEFUL INFORMATION CLEANING AND MAINTENANCE The filter prevents remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed. NOTE For the best performance of the dishwasher, the filters should be cleaned at least once a week...

Page 30 - ERROR CODES

Page 31 - SPECIFICATIONS

31 SPECIFICATIONS Height 845mm Width 448mm Depth 600mm Depth (door open) 1175mm Standard Cleaning Cycle ECO Noise Level 49 dB(A) Water Pressure 0.04-1.0 MPa Power Supply 220-240V ~ 50Hz Capacity 10 Place settings Rated Power 1760-2100W Heating Element 1800W Weights Net: 38 kg / Gross: 43 kg

Seiki SC-1000AU7DS - User Manual

Table of Contents:

Summary

Other Seiki Dishwashers Models