Seiki SC-1200AU6DS - Manuals

7 GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so. All other servicing is to be done by a qualified technician, or contact our support centre on 1300 296 699 for advice.

8 PRODUCT OVERVIEW 1. Upper Basked2. Inner Pipe3. Lower Basket4. Dispenser5. Cup Shelf6. Spray Arms7. Filter Assembly8. Inlet Pipe Connector9. Drain Pipe 1 2 3 4 8 9 5 6 7

10 WATER PRESSURE Minimum inlet water pressure is 0.04MPaMaximum inlet water pressure is 1.0MPa NOTE: The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. Before installing your appliance, read all safety instructions in this manual, especially th...

14 LOADING THE DISHWASHER For best performance, follow bellow guidelines: ATTENTION: BEFORE LOADING BASKETS Its not necessary to rinse all dishes before putting into dishwasher, though we suggest you scrape off any large amounts of leftover food and soften remnants of burnt food in pots and pans to ...

23 FAQs Problem Possible Cause The dishwasher does not run The fuse is blown or circuit breaker is activated Replace the fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher. The power supply is not turned on. Make sure the dishwasher is powered on ...

24 USEFUL INFORMATION ERROR CODES When some malfunctions occur, the appliance will display error codes to warn you: CLEANING AND MAINTENANCE The filter prevents remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed. NOTE ...

27 SPECIFICATIONS Height 845mm Width 598mm Depth 610mm Water Pressure 0.04-1.0 MPa Power Supply 220-240V ~ 50Hz Capacity 12 Place settings Rated Power 1760-2100W