Page 3 - CONTENTS
General Safety 4 Product Overview 8 Getting Started 11 Installation Area 12 Positioning the Appliance 13 Water Connection 14 How to Connect Safety Supply Hose 14 Drain Hose Connection 15 Water Outlet and Drain Connection 15 Electrical Connection 16 Starting a Wash Program 17 Instructions Loading the...
Page 4 - IMPORTANT INFORMATION; GENERAL SAFETY
4 Read this manual thoroughly before you start using the Dishwasher. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. ELECTRICAL SAFETY • Voltage: Plug the appliance to ...
Page 6 - USAGE CONDITIONS AND RESTRICTIONS
6 GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.• This appliance is not t...
Page 7 - CLEANING AND MAINTENANCE
7 GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so. All other servicing is to be done by a qualified technician, or contact our support centre on [email protected] for advic...
Page 8 - PRODUCT OVERVIEW
8 PRODUCT OVERVIEW CONTROL PANEL 1. Power Press this button to turn on your dishwasher, the screen lights up. 2. Program Select your desired washing program, the selected program indicator will be lit. 3. Half Load When you have half filled dishwasher of kitchen utensils, press this half load button...
Page 11 - GETTING STARTED
11 Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. The minimum measurements needed for this dishwasher installation are as below: GETTING STARTED
Page 17 - STARTING A WASH PROGRAM; Open the door slightly (50mm) to assist in drying after every wash.; LOADING THE DISHWASHER
17 STARTING A WASH PROGRAM * This program was used for testing the appliance to the Australian Standard AS/NZS 2007.1 with 15 place settings, Rinse aid settings on 6 and the upper basket with the upper set of wheels on the rail support. NOTE: Open the door slightly (50mm) to assist in drying after e...
Page 18 - INSTRUCTIONS
18 LOADING THE DISHWASHER For best performance, follow bellow guidelines: ATTENTION: BEFORE LOADING BASKETS Its not necessary to rinse all dishes before putting into dishwasher, though we suggest you scrape off any large amounts of leftover food and soften remnants of burnt food in pots and pans to ...
Page 28 - FAQs
28 FAQs Problem Possible Cause The dishwasher does not run The fuse is blown or circuit breaker is activated Replace the fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher. The power supply is not turned on. Make sure the dishwasher is powered on ...
Page 29 - USEFUL INFORMATION
29 USEFUL INFORMATION CLEANING AND MAINTENANCE The filter prevents remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed. NOTE For the best performance of the dishwasher, the filters should be cleaned at least once a week...
Page 31 - ERROR CODES
Page 32 - SPECIFICATIONS
32 SPECIFICATIONS Height 845mm Width 598mm Depth 600mm Depth (door open) 1175mm Standard Cleaning Cycle ECO Water Pressure 0.04-1.0 MPa Power Supply 220-240V ~ 50Hz Capacity 15 Place settings Rated Power 1760-2100W Weights Net: 40.5kg / Gross: 46kg