Page 3 - Contents
Momentus 5400.6 SATA Product Manual, Rev. E i Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - ii
Page 5 - iii; List of Figures
Momentus 5400.6 SATA Product Manual, Rev. E iii List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Introduction
Momentus 5400.6 SATA Product Manual, Rev. E 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus ® 5400.6 SATA model drives: These drives provide the following key features: • 5,400-RPM spindle speed. • 8-Mbyte buffer. • ...
Page 8 - About the Serial ATA interface; any jumpers or other configuration options.
2 Momentus 5400.6 SATA Product Manual, Rev. E 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not n...
Page 9 - Drive specifications; the drive; Specification summary table
Momentus 5400.6 SATA Product Manual, Rev. E 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the Momentus 5400.6 S...
Page 11 - Drive specifications for 250 and 160 GB models
Momentus 5400.6 SATA Product Manual, Rev. E 5 Table 2: Drive specifications for 250 and 160 GB models Drive specification ST9250315AS ST9250315ASG ST9160314AS ST9160314ASG ST9160301AS Formatted Gbytes (512 bytes/sector)* 250 160 Guaranteed sectors 488,397,168 312,581,808 Bytes per sector 512 Physica...
Page 13 - Drive specifications for 120 and 80 GB models
Momentus 5400.6 SATA Product Manual, Rev. E 7 Table 3: Drive specifications for 120 and 80 GB models Drive specification ST9120315AS ST9120315ASG ST980313AS ST980313ASG Formatted Gbytes (512 bytes/sector)* 120 80 Guaranteed sectors 234,441,648 156,301,488 Bytes per sector 512 Physical read/write hea...
Page 14 - Formatted capacity; Model
8 Momentus 5400.6 SATA Product Manual, Rev. E * One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specif...
Page 15 - Default logical geometry; Cylinders; LBA mode; Physical organization; Drive model; Recording and interface technology; Interface
Momentus 5400.6 SATA Product Manual, Rev. E 9 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above . See Section 4.3.1, "Identify Device command" (words 60-61 and 1...
Page 16 - Physical characteristics; Height; Seek time; Typical seek times; Read; Average latency; Time to ready
10 Momentus 5400.6 SATA Product Manual, Rev. E 2.6 Physical characteristics Drive specification Height (mm) (inches) 9.5 +/-0.2 0.374 +/-0.0079 Width (mm) (inches) 69.85 +/-0.25 2.75 +/-0.0098 Length (mm) (inches) 100.35 +0.20 / -0.25 3.957 +0.0079 / -0.0098 Weight (max) ST9500325AS ST9500325ASG ST9...
Page 17 - Power specifications; Power dissipation; Seek
Momentus 5400.6 SATA Product Manual, Rev. E 11 2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 11. Typical power measurements are based on an average of drives ...
Page 18 - Typical current profile; Figure 1. Typical +5V only startup and operation current profile; Deferred spinup
12 Momentus 5400.6 SATA Product Manual, Rev. E 2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus 5400.6 SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400.3 SATA B...
Page 20 - Environmental specifications
14 Momentus 5400.6 SATA Product Manual, Rev. E 2.10 Environmental specifications 2.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambien...
Page 22 - Acoustics; Electromagnetic immunity; Performance seek; Radio frequency environments; Test
16 Momentus 5400.6 SATA Product Manual, Rev. E 2.11 Acoustics Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25 ° C). Emission levels are reported as the total A-weighted sound power levels for st...
Page 23 - Reliability; Measurement type; Nonrecoverable read errors; Free Fall Protection feature
Momentus 5400.6 SATA Product Manual, Rev. E 17 2.13 Reliability Measurement type Specification Nonrecoverable read errors 1 per 10 14 bits read, max. Annualized Failure Rate (AFR) <0.48% Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10%...
Page 24 - Agency certification; Safety certification; • Trade name or applicant: Seagate Technology LLC
18 Momentus 5400.6 SATA Product Manual, Rev. E 2.14 Agency certification 2.14.1 Safety certification The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America. 2.14.2 Electromagnetic compatibility H...
Page 25 - • Reorient the receiving antenna.
Momentus 5400.6 SATA Product Manual, Rev. E 19 2.14.3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar-keted t...
Page 26 - Environmental protection; European Union Restriction of Hazardous Substances (RoHS); Corrosive environment; 表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国; 表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国
20 Momentus 5400.6 SATA Product Manual, Rev. E 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.15.1 European Union Restriction of Hazardous Substances (RoHS) Seagate d...
Page 27 - Configuring and mounting the drive; Handling and static-discharge precautions; • Handle the drive only by its edges or frame.
Momentus 5400.6 SATA Product Manual, Rev. E 21 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to ...
Page 28 - Configuring the drive; Figure 2. Serial ATA connectors; Serial ATA cables and connectors; Figure 3. Attaching SATA cabling
22 Momentus 5400.6 SATA Product Manual, Rev. E 3.2 Configuring the drive Each drive on the Serial ATA interface connects in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationshi...
Page 29 - Drive mounting; • Use only M3 UNC mounting screws.; Non-operating with no hard errors
Momentus 5400.6 SATA Product Manual, Rev. E 23 3.4 Drive mounting You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mount-ing the drive: • Allo...
Page 31 - Serial ATA connector pin definitions; Segment; Key and spacing separate signal and power segments
Momentus 5400.6 SATA Product Manual, Rev. E 25 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also suppo...
Page 33 - Supported ATA commands; See
Momentus 5400.6 SATA Product Manual, Rev. E 27 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T. comma...
Page 35 - Identify Device command; The Identify Device command (command code EC
Momentus 5400.6 SATA Product Manual, Rev. E 29 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on page ...
Page 37 - Bit
Momentus 5400.6 SATA Product Manual, Rev. E 31 89 Security erase time 0000 H 90 Enhanced security erase time 0000 H 92 Master password revision code FFFE H 93 Hardware reset value (see description following this table) xxxx H 94 Auto acoustic management setting xxxx H 95–99 ATA-reserved 0000 H 100–1...
Page 41 - Seagate Technology support services; Internet; For information regarding Seagate products and services, visit; mySeagate; Global Customer Support; Presales Support
Momentus 5400.6 SATA Product Manual, Rev. E 35 5.0 Seagate Technology support services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Technical...
Page 42 - Customer Service Operations; Warranty Service; for the service center near you.; USA/Canada/Latin America support services; Direct dial; and Mexico; Europe, the Middle East and Africa Support Services
36 Momentus 5400.6 SATA Product Manual, Rev. E Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for warranty...
Page 43 - Index
Momentus 5400.6 SATA Product Manual, Rev. E 37 Index A ACA 18 acoustics 4 , 6 , 8 , 16 Active mode 13 Address 27 AFR 17 Agency certification 18 Altitude 14 Altitude, nonoperating 4 , 6 , 7 Altitude, operating 4 , 5 , 7 Ambient temperature 4 , 5 , 7 , 14 ambient temperature 10 Annualized Failure Rate...
