SEAGATE ST980313AS - Manuals

Momentus 5400.6 SATA Product Manual, Rev. E 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus ® 5400.6 SATA model drives: These drives provide the following key features: • 5,400-RPM spindle speed. • 8-Mbyte buffer. • ...

2 Momentus 5400.6 SATA Product Manual, Rev. E 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not n...

Momentus 5400.6 SATA Product Manual, Rev. E 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the Momentus 5400.6 S...

Momentus 5400.6 SATA Product Manual, Rev. E 5 Table 2: Drive specifications for 250 and 160 GB models Drive specification ST9250315AS ST9250315ASG ST9160314AS ST9160314ASG ST9160301AS Formatted Gbytes (512 bytes/sector)* 250 160 Guaranteed sectors 488,397,168 312,581,808 Bytes per sector 512 Physica...

Momentus 5400.6 SATA Product Manual, Rev. E 7 Table 3: Drive specifications for 120 and 80 GB models Drive specification ST9120315AS ST9120315ASG ST980313AS ST980313ASG Formatted Gbytes (512 bytes/sector)* 120 80 Guaranteed sectors 234,441,648 156,301,488 Bytes per sector 512 Physical read/write hea...

8 Momentus 5400.6 SATA Product Manual, Rev. E * One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specif...

Momentus 5400.6 SATA Product Manual, Rev. E 9 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above . See Section 4.3.1, "Identify Device command" (words 60-61 and 1...

10 Momentus 5400.6 SATA Product Manual, Rev. E 2.6 Physical characteristics Drive specification Height (mm) (inches) 9.5 +/-0.2 0.374 +/-0.0079 Width (mm) (inches) 69.85 +/-0.25 2.75 +/-0.0098 Length (mm) (inches) 100.35 +0.20 / -0.25 3.957 +0.0079 / -0.0098 Weight (max) ST9500325AS ST9500325ASG ST9...

Momentus 5400.6 SATA Product Manual, Rev. E 11 2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in the table on page 11. Typical power measurements are based on an average of drives ...

12 Momentus 5400.6 SATA Product Manual, Rev. E 2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus 5400.6 SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400.3 SATA B...

14 Momentus 5400.6 SATA Product Manual, Rev. E 2.10 Environmental specifications 2.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambien...

16 Momentus 5400.6 SATA Product Manual, Rev. E 2.11 Acoustics Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25 ° C). Emission levels are reported as the total A-weighted sound power levels for st...

Momentus 5400.6 SATA Product Manual, Rev. E 17 2.13 Reliability Measurement type Specification Nonrecoverable read errors 1 per 10 14 bits read, max. Annualized Failure Rate (AFR) <0.48% Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10%...

18 Momentus 5400.6 SATA Product Manual, Rev. E 2.14 Agency certification 2.14.1 Safety certification The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America. 2.14.2 Electromagnetic compatibility H...

Momentus 5400.6 SATA Product Manual, Rev. E 19 2.14.3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar-keted t...

20 Momentus 5400.6 SATA Product Manual, Rev. E 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.15.1 European Union Restriction of Hazardous Substances (RoHS) Seagate d...

Momentus 5400.6 SATA Product Manual, Rev. E 21 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to ...

22 Momentus 5400.6 SATA Product Manual, Rev. E 3.2 Configuring the drive Each drive on the Serial ATA interface connects in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationshi...

Momentus 5400.6 SATA Product Manual, Rev. E 23 3.4 Drive mounting You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mount-ing the drive: • Allo...

Momentus 5400.6 SATA Product Manual, Rev. E 25 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also suppo...

Momentus 5400.6 SATA Product Manual, Rev. E 27 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T. comma...

Momentus 5400.6 SATA Product Manual, Rev. E 29 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on page ...

Momentus 5400.6 SATA Product Manual, Rev. E 31 89 Security erase time 0000 H 90 Enhanced security erase time 0000 H 92 Master password revision code FFFE H 93 Hardware reset value (see description following this table) xxxx H 94 Auto acoustic management setting xxxx H 95–99 ATA-reserved 0000 H 100–1...

Momentus 5400.6 SATA Product Manual, Rev. E 35 5.0 Seagate Technology support services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Technical...

36 Momentus 5400.6 SATA Product Manual, Rev. E Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for warranty...

Momentus 5400.6 SATA Product Manual, Rev. E 37 Index A ACA 18 acoustics 4 , 6 , 8 , 16 Active mode 13 Address 27 AFR 17 Agency certification 18 Altitude 14 Altitude, nonoperating 4 , 6 , 7 Altitude, operating 4 , 5 , 7 Ambient temperature 4 , 5 , 7 , 14 ambient temperature 10 Annualized Failure Rate...