Page 2 - © 2019 Seagate Technology LLC. All rights reserved.; Document Revision History; Revision; : Updated Table 2 DC power requirements Operating &* footnote
© 2019 Seagate Technology LLC. All rights reserved. Publication number: 100844776, Rev. B May 2019Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SkyHawk, PowerChoice and SeaTools are either trademarks o...
Page 3 - Seagate SkyHawk Serial ATA Product Manual, Rev. B; Contents
Seagate SkyHawk Serial ATA Product Manual, Rev. B 2 Contents Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - For information regarding online support and services, visit:; Seagate® Technology Support Services
Seagate SkyHawk Serial ATA Product Manual, Rev. B 4 For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery serv...
Page 6 - Introduction; Seagate® SkyHawkTM Serial ATA model drives::; About the Serial ATA interface; applications to work as normal.; xxE Standard models; Note
Seagate SkyHawk Serial ATA Product Manual, Rev. B 5 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following: Seagate® SkyHawk™ Serial ATA model drives:: These drives provide the following key features:• 7200 RPM spindle speed.• Full-track mult...
Page 7 - Drive specifications; phrases; Specification summary tables; appropriate section of this manual.; Table 1 Drive specifications summary; Drive specification
Seagate SkyHawk Serial ATA Product Manual, Rev. B 6 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following d...
Page 8 - Formatted capacity; LBA mode; ST models
Seagate SkyHawk Serial ATA Product Manual, Rev. B 7 # One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * See Section 2.11, "Reliability" for rated MTBF device operating condition requirement...
Page 9 - See Figure 2 on page 21; Interface; Power Dissipation
Seagate SkyHawk Serial ATA Product Manual, Rev. B 8 2.3 Recording and interface technology 2.4 Start/stop times 2.5 Power specifications The drive receives DC power (+5V or +12V ) through a native SATA power connector. See Figure 2 on page 21 . 2.5.1 Power consumption Power requirements for the driv...
Page 10 - Typical current profiles; • Using 5V power, the drive is expected to operate with a maximum of; Voltage tolerance
Seagate SkyHawk Serial ATA Product Manual, Rev. B 9 2.5.1.1 Typical current profiles Figure 1. Typical 12V startup and operation current profile 2.5.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 V line or an equ...
Page 11 - Extended Power Conditions - PowerChoice; power consumption and performance requirements.; PowerChoice is invoked using one of two methods; Reduced electronics
Seagate SkyHawk Serial ATA Product Manual, Rev. B 10 2.5.4 Extended Power Conditions - PowerChoice ™ Utilizing the load/unload architecture a programmable power management inter face is provided to tailor systems for reduced power consumption and performance requirements. The table below lists the s...
Page 13 - Environmental limits; See; Humidity
Seagate SkyHawk Serial ATA Product Manual, Rev. B 12 2.6 Environmental limits Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C)...
Page 14 - Shock and Vibration; mounting point locations.; Shock; maximum duration of 2ms.; Vibration; a. Linear Random Operating Vibration
Seagate SkyHawk Serial ATA Product Manual, Rev. B 13 2.7 Shock and Vibration Shock and vibration measurements specified in this document are made directly on the drive itself and applied in the X, Y, and Z axis at the drive mounting point locations. 2.7.1 Shock a. Operating The drive will operate wi...
Page 15 - Acoustics; Table 3; Performance seek; Table 4; Test
Seagate SkyHawk Serial ATA Product Manual, Rev. B 14 2.8 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a...
Page 16 - Reliability; Nonrecoverable read errors
Seagate SkyHawk Serial ATA Product Manual, Rev. B 15 2.11 Reliability 2.11.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The production disk drive shall achieve an annualized failure-rate of 0.87% (MTBF of 1,000,000 hours) over a 5 year service life when used in Surveillance ...
Page 17 - Agency and Safety Certifications; Regulatory Model Numbers:; South Korean KC Certification Mark
Seagate SkyHawk Serial ATA Product Manual, Rev. B 16 2.12 Agency and Safety Certifications Each Hard Drive and Solid State Drive ("drives") has a product label that includes certifications that are applicable to that specific drive. The following information provides an overview of requireme...
Page 18 - Radio and television interference.; How to Identify and Resolve Radio-Television
Seagate SkyHawk Serial ATA Product Manual, Rev. B 17 2.12.7 Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the O...
Page 19 - Environmental protection; European Union Restriction of Hazardous Substance Law; Table 5 China - Hazardous Substances; 部件名称; Part Name; 有害物质; HDD; 印刷电路板组装; PCBA
Seagate SkyHawk Serial ATA Product Manual, Rev. B 18 2.13 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.13.1 European Union Restriction of Hazardous Substance Law 2.13.1....
Page 20 - Corrosive environment; cannot duplicate every potential application environment.; Top Cover
Seagate SkyHawk Serial ATA Product Manual, Rev. B 19 2.13.3 Taiwan Requirements — Taiwan RoHS Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and elec...
Page 21 - Reference documents; Specification for Acoustic Test Requirement and Procedures; Product warranty; Shipping
Seagate SkyHawk Serial ATA Product Manual, Rev. B 20 2.14 Reference documents Supported standards Serial ATA Revision 3.3 specification ANSI Documents SFF-8301 3.5” Drive Form Factor with Serial Connector INCITS 522-2014 SCSI Protocol Layer-4 (SPL-4) Rev. 08 Specification for Acoustic Test Requireme...
Page 22 - Configuring and mounting the drive; Handling and static-discharge precautions; Table 7; Attaching SATA cabling; Drive mounting; Figure 3; • Handle the drive by its edges or frame
Seagate SkyHawk Serial ATA Product Manual, Rev. B 21 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be expos...
Page 23 - Mechanical specifications; Refer to
Seagate SkyHawk Serial ATA Product Manual, Rev. B 22 3.4.1 Mechanical specifications Refer to Figure 3 for detailed mounting configuration dimensions. See Section 3.4, "Drive mounting" Figure 3. Mounting configuration dimensions 8TB models Weight: 8TB models 1.579 lb 716g Note These dimensio...
Page 24 - Hot-Plug compatibility; The drive motor must come to a complete stop; (Ready to spindle stop time indicated in
Seagate SkyHawk Serial ATA Product Manual, Rev. B 23 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed i...
Page 25 - Supported ATA commands; for details and; Table 8; Command name
Seagate SkyHawk Serial ATA Product Manual, Rev. B 24 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R.T....
Page 27 - Identify Device command; The Identify Device command (command code EC; See Section 2.0 on page 6; for default; Word; xxxx
Seagate SkyHawk Serial ATA Product Manual, Rev. B 26 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 8 on p...
Page 30 - Set Features command; Table 9
Seagate SkyHawk Serial ATA Product Manual, Rev. B 29 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt...
Page 32 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 Publication Number: 100844776, Rev. B May 2019
