Page 2 - © 2019 Seagate Technology LLC. All rights reserved.; Document Revision History; Revision
© 2019 Seagate Technology LLC. All rights reserved. Publication number: 100856098, Rev. A July 2019Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. IronWolf and SeaTools are either trade-marks or register...
Page 3 - Contents
Seagate IronWolf Product Manual, Rev. A 2 Contents Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - Figures; Figure 1
Seagate IronWolf Product Manual, Rev. A 4 Figures Figure 1 Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 2 Mounting dimensions (6TB models) . . . . . . . . . . . . . . ....
Page 6 - Seagate® Technology Support Services
Seagate IronWolf Product Manual, Rev. A 5 For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visi...
Page 7 - IronWolf models
Seagate IronWolf Product Manual, Rev. A 6 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate® IronWolf® and model drives: These drives provide the following key features: • 1M hour MTBF - designed for high write duty cycle across ...
Page 8 - Introduction; About the SATA interface; configuration options.
Seagate IronWolf Product Manual, Rev. A 7 www.seagate.com Introduction 1.1 About the SATA interface The Serial ATA (SATA) inter face provides several advantages over the traditional (parallel) ATA inter face. The primar yadvantages include: • Easy installation and configuration with true plug-and-pl...
Page 9 - Drive Specifications; the drive; Specification summary tables; The specifications listed in
Seagate IronWolf Product Manual, Rev. A 8 2.0 Drive Specifications Unless other wise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. Forconvenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model...
Page 11 - Drive Specifications; Formatted capacity; Default logical geometry
Seagate IronWolf Product Manual, Rev. A 10 www.seagate.com Drive Specifications 2.2 Formatted capacity *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA m...
Page 12 - Physical characteristics; Maximum height; TB models
Seagate IronWolf Product Manual, Rev. A 11 www.seagate.com Drive Specifications 2.5 Physical characteristics 2.6 Start/stop times The start/stop times are listed below. Time-to-ready may be longer than normal if the drive power is removed without going through normal OS powerdownprocedures. Maximum ...
Page 13 - Power specifications; Power dissipation; Note
Seagate IronWolf Product Manual, Rev. A 12 www.seagate.com Drive Specifications 2.7 Power specifications The drive receives DC power (+5V or +12V ) through a native SATA power connector. Refer to Figure 1 on page 22 . 2.7.1 Power consumption Power requirements for the drives are listed in Table 2 . ...
Page 15 - Environmental specifications; for base plate; Relative humidity; Operating
Seagate IronWolf Product Manual, Rev. A 14 www.seagate.com Drive Specifications 2.8 Environmental specifications This section provides the temperature, humidity, shock , and vibration specifications for IronWolf drives. Ambienttemperature is defined as the temperature of the environment immediately ...
Page 16 - Operating shock
Seagate IronWolf Product Manual, Rev. A 15 www.seagate.com Drive Specifications 2.8.4 Altitude 2.8.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mountingscrews. Shock may be applied in the X, Y or Z axis. 2.8.5.1 Operating shock ...
Page 17 - Acoustics; Seek; Test
Seagate IronWolf Product Manual, Rev. A 16 www.seagate.com Drive Specifications 2.9 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements areconsistent with ISO document 7779. Sound power measurements are taken under essentially fr...
Page 18 - Warranty
Seagate IronWolf Product Manual, Rev. A 17 www.seagate.com Drive Specifications 2.11 Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/support/warranty-and-replacements/ From this page, click on “Is my Drive under Warr...
Page 19 - South Korean KC Certification Mark
Seagate IronWolf Product Manual, Rev. A 18 www.seagate.com Drive Specifications 2.12.3 Australian RCM Compliance Mark If these models have the RCM marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR32 and meetthe Electromagnetic Compatibility (EMC) Framework requirements of the ...
Page 20 - Radio and television interference.; How to Identify and Resolve; Environmental protection; European Union Restriction of Hazardous Substance Law
Seagate IronWolf Product Manual, Rev. A 19 www.seagate.com Drive Specifications 2.12.8 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as anexternal device). As such, each drive is considered to be a subassembly even whe...
Page 21 - 部件名称; Part Name; 有害物质; HDD; 印刷电路板组装; PCBA
Seagate IronWolf Product Manual, Rev. A 20 2.13.1.2 Substances of Very High Concern (SVHC) The European Union REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC) 1907/2006 regulates chemicals shipped into and used in Europe. A number of parts and materials in...
Page 22 - Corrosive environment; Table 6 Taiwan - Restricted Substances
Seagate IronWolf Product Manual, Rev. A 21 www.seagate.com Drive Specifications 2.13.3 Taiwan Requirements — Taiwan RoHS Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substa...
Page 23 - Configuring and Mounting the Drive; Handling and static-discharge precautions; Caution; Configuring the drive; Table 7; Attaching SATA cabling
Seagate IronWolf Product Manual, Rev. A 22 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to pote...
Page 24 - Configuring and Mounting the Drive; Drive mounting
Seagate IronWolf Product Manual, Rev. A 23 www.seagate.com Configuring and Mounting the Drive 3.4 Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 2 for drive mounting dimensions. Fol...
Page 25 - Notes
Seagate IronWolf Product Manual, Rev. A 24 www.seagate.com SATA Interface 4.0 SATA Interface These drives use the industr y-standard Serial ATA (SATA) inter face that suppor ts FIS data transfers. It suppor ts ATAprogrammed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA m...
Page 26 - SATA Interface; Supported ATA commands; Command name
Seagate IronWolf Product Manual, Rev. A 25 www.seagate.com SATA Interface 4.3 Supported ATA commands The following table lists SATA standard commands that the drive supports.For a detailed description of the ATA commands, refer to the Serial ATA International Organization:Serial ATA Revision 3.2 ( h...
Page 28 - Word
Seagate IronWolf Product Manual, Rev. A 27 www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are ...
Page 34 - Code in features register
Seagate IronWolf Product Manual, Rev. A 33 www.seagate.com SATA Interface 4.3.3 S.M.A.R.T. commands S .M .A .R .T. prov id e s n e a r- te r m f a il u re p re d i c t i o n fo r d is k d r i ve s. W h e n S . M . A . R . T. i s e n a b l e d, t h e d r i ve m o n i t o r spredetermined drive attrib...
Page 35 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 Publication Number: 100856098 , Rev. A July 2019
