Schneider Electric 208 - Manual

3 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount Specifications Operating Conditions This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the UPS. Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the sp...

Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount 4 Operation Connect Equipment to the UPS Note: The UPS will charge to 90% capacity in the first three hours of normal operation. Do not expect full battery runtime capability during this initial charge period. 1. Connect equipment to the outlets on th...

5 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount Display Interface Overview Using the display interface Use the U P and D OWN buttons to scroll through the main menu options. Press E NTER to view the sub- menus under each main menu option. Press E SCAPE to exit a sub-menu and return to a main menu...

Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount 6 Advanced menus The Advanced menus provide additional options for the UPS and are available only if the display interface is configured to use the Advanced menus. About Display information about this unit:• Unit model number• Serial number• Battery i...

7 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount Configuration UPS Settings Start-up Settings Configure these settings at initial start-up, using the display interface or APC PowerChute ® software. Note: During start-up, use the display interface to configure these settings. If nothing is selected...

9 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount Main Outlet Group and the Switched Outlet Group Overview The Main Outlet Group and the Switched Outlet Group can be configured to independently turn off, turn on, shut down, and reboot connected equipment. (These features are not available on the 75...

Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount 10 Network Management Card Settings These settings are available only on units that have a Network Management Card (NMC) and are set in the factory. These settings can only be modified using an external interface, like the NMC web interface. • NMC IP ...

11 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount Emergency Power Off EPO Overview The Emergency Power Off (EPO) option is a safety feature that will immediately disconnect all connected equipment from utility power. The UPS will immediately shut down and will not switch to battery power. The UPS ...

Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount 12 Troubleshooting Problem and Possible Cause Solution The UPS will not turn on or there is no output The unit has not been turned on. Press the ON button once to turn on the UPS. The UPS is not connected to utility power. Ensure that the power cable ...

Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount 14 Service and Support Service If the unit requires service, do not return it to the dealer. Follow these steps: 1. Review the Troubleshooting section of the manual to eliminate common problems. 2. If the problem persists, contact APC Customer Support...

15 Smart-UPS 750-3000 VA 120/208/230 Vac Rack-mount APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests...

Smart-UPS Factory Warranty LIMITED WARRANTY American Power Conversion (APC) warrants its Smart-UPS (Products) to be free from defects in materials and workmanship for a period of three (3) years, excluding the batteries, which are warranted for two (2) years from date of purchase. APC's obligation u...