Sceptre E27 - Manual

Page4 SCEPTRE E27 Important Information Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on saf ety. However, improper use can result in...

SCEPTRE E27 Page5 Tips and Safety Precautions This product is designed and manuf actured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the f ollowing rules should be observed for the installation, use and maintena...

Page6 SCEPTRE E27  Do not overload power strips and extension cords. Overloading can result in fire or electric shock.  The wall socket should be installed near the equipment and should be easily accessible.  Only the marked power source can be used for the product. Any power source other than th...

SCEPTRE E27 Page7 Table of Contents Important Inf ormation .................................................................................................................................1 FCC Compliance Statement ........................................................................................

Page8 SCEPTRE E27 Dear SCEPTRE Customer, Congratulations on your new SCEPTRE E27 LED monitor purchase. Thank you f or your support. To ensure saf ety and many years of trouble free operation of your LED monitor, please read the manual caref ully bef ore making any adjustments, and keep them in a saf...

SCEPTRE E27 Page9 Opening the Package The SCEPTRE E27 LED monitor is packaged in a carton together with standard accessories. The weight of the LED display is approximately 12.61 lbs. Since the LED panel can be easily scratched or broken, please handle the product gently. Never place the unit on a s...

Page10 SCEPTRE E27 Setting Up Your Monitor The following are general short steps to setup and use the monitor with your PC under the Windows 7 operating system . 1. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and turn on the PC and the monitor. 2. Under...

SCEPTRE E27 Page11 2. Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. Look at the base where the two buckles are located. Pull / expand them outwards while pulling on the base and it will come off. 2. The monitor is ready f or mounting. Un...

Page12 SCEPTRE E27 Identifying Front and Rear Panel Front View POWER INDICATOR - If light is blue, the monitor is turned on. If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION - This monitor ’s clearest picture is produced under it...

SCEPTRE E27 Page13 Connections HDMI – HDMI stands for High Definition Multimedia Interf ace. This connection is f or A/V devices such as Blu-ray player, DVD player or game consoles such as Playstation®3. DVI – DVI stands f or Digital Video Interface. This connection is for computers to send video si...

Page14 SCEPTRE E27 Connecting the LED Monitor If You have DVI Connection on Your Video Card… 1. Make sure the power of E27 LED MONITOR is turned off. 2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your E27 LED MONITOR. 3. Turn on the power o...

SCEPTRE E27 Page15 If You have VGA Connection on Your Video Card… 1. Make sure the power of E27 LED MONITOR is turned off. 2. If you were previously using a CRT (bulky) monitor , please hook up your old monitor first and make sure your refresh rate is s et to 60 Hz frequency bef ore using the E27 LE...

Page16 SCEPTRE E27 If You have HDMI Connection on Your Cable or Satellite Box… 1. Make sure the power of the E27 LED MONITOR is turned off. 2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the cable or satellite box. 3. Turn on the power of both ...

SCEPTRE E27 Page17 On Screen Display (OSD) Menu The OSD menu of the monitor provides various adjustments f or the monitor such as color, brightness, contrast, and volume…..etc. W hen you press the MENU button on the monitor, the OSD screen will appear. Select each of the functions with the UP or DOW...

Page18 SCEPTRE E27 PICTURE SETTINGS This function adjusts the brightness and contrast of the LCD. 1. To use this function, press MENU to open the OSD then highlight PICTURE SETTINGS function by pressing the UP or DOWN button. 2. Press MENU again to enter the function. 3. Press UP or DOWN button to s...

SCEPTRE E27 Page19 COLOR ADJUST This function adjusts the overall balance of white colors in a picture in large increments. Color temperature consists of COOL, NORMAL, W ARM, and USER COLOR. 1. To use this function, press MENU to open the OSD then highlight COLOR ADJUST function by pressing the UP o...

Page20 SCEPTRE E27 IMAGE This function adjusts the image of the monitor. 1. Press MENU to open the OSD then highlight IMAGE by pressing the UP or DOWN buttons. 2. Press MENU to enter the function. 3. Press the UP or DOWN buttons to select the option you want to adjust and press MENU to enter the opt...

SCEPTRE E27 Page21 SIGNAL SOURCE This function selects the source of the monitor. 1. Press MENU to open the OSD then highlight SIGNAL SOURCE by pressing the UP or DOWN buttons. 2. Press MENU to enter the function. 3. Press the UP or DOWN buttons to select the source you want to change to.

Page22 SCEPTRE E27 OSD MENU This function allows you to change the language of the OSD and adjust the OSD options. 1. Press MENU to open the OSD then highlight SETUP MENU by pressing the UP or DOWN buttons. 2. Press MENU to enter the function. 3. Press the UP or DOWN buttons to select the option you...

SCEPTRE E27 Page23 MISC. This function changes various miscellaneous options. 1. Press MENU to open the OSD then highlight MISC. by pressing the UP or DOWN buttons. 2. Press MENU to enter the function. 3. Press the UP or DOWN buttons to select the option you want to change to and press MENU to begin...

Page24 SCEPTRE E27 Supported PC Resolution STD RESOLUTION & REFRESH RATE VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz VGA 640 x 480 @ 75Hz VGA 640 x 480 @ 72.8Hz SVGA 800 x 600 @ 60Hz SVGA 800 x 600 @ 72.2Hz SVGA 800 x 600 @ 75Hz XVGA 1024 x 768 @ 60Hz XVGA 1024 x 768 @ 70Hz XVGA 1024 x 768 @ 75Hz ...

SCEPTRE E27 Page25 Troubleshooting Problem Possible solutions DISPLAY IS UNCLEAR AND UNSTABLE To stabilize and clarif y your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 X 1080 at 60Hz, then AUTO ADJUST. THERE IS NO LED DISPLAY or SCREEN SAYS N...

Page26 SCEPTRE E27 Problem Possible solutions I CANNOT GET THE RESOLUTION 1920x1080 If you are using DVI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card’s DVI cannot support widescreen resolutions. Sometimes your video card will not read t...

SCEPTRE E27 Page27 Problem Possible solutions THE W ORDS ARE TOO SMALL AT 1920X1080 At the native resolution of 1920x1080, some people might feel that the words are too small to read. You c an change the size of the words in W indows O perating System via its display properties. For W indows XP 1. R...

Page28 SCEPTRE E27 How do I clean the LED Monitor? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the LED Monitor. 2. Do not use v olatile solv ent (alcohol, rosin, and toluene) to clean the LED Monitor. These types of chemicals might damage the housing and the LCD gl...

SCEPTRE E27 Page29 Specification Display panel Active Area / Screen Size Diagonal 27 inches Aspect Ratio W idescreen 16 : 9 (Def ault), 4:3 Resolution 1920x1080 Brightness 250 cd/m 2 Contrast 1000:1 (NATIVE) 5,000,000:1 (DCR) Response Time 5ms (Gray to Gray) Viewing Angle Typical 170/160 Degree (Hor...

Page30 SCEPTRE E27 Call Us If You Need Help! Products are often returned due to a technical problem rather than a defectiv e product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolv e the problem over the phone or email. For more informati...

SCEPTRE E27 Page31 LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska...

Page32 SCEPTRE E27 LIMITATIONS ON HOW LONG AN IMPLIED W ARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQU ENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from...

SCEPTRE E27 Page33 Disclaimer & Copyright Information Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries. This Monitor meets the ENERGY STAR® guidelines under the default setting. Changing this setting or enabling other options will inc...