Sceptre X20WG-Naga - Manual

Page 5 - Rev.3; The LCD Monitor; Your New LCD Monitor; Your LCD Monitor has been designed to be versatile, ergonomic and; Unpacking; Before unpacking your LCD Monitor, prepare a suitable workspace

1 Rev.3 The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x350 VGA to 1680x1050 WSXGA+. The digital controls located on the front panel allow the user to easily adjust...

Page 6 - Rev.3; If you previously were using a CRT monitor instead of a LCD monitor,

2 Rev.3 Note: Using a computer for an extended period of time with a poor workstation set-up and incorrect working habits can cause health problems. The science of ergonomics studies the relationship between health and a suitable working environment. There is a section on ergonomics at the end of th...

Page 7 - Rev.3; Identifying Components; A. The LCD Monitor — Front View; Sceptre logo Indicator; Wide; LCD Monitor Control Panel; Refer to Chapter 2 for more details.

3 Rev.3 Identifying Components A. The LCD Monitor — Front View Figure 1-1: The LCD Monitor Front View 1. Sceptre logo Indicator This foursquare LED indicator blue lit when the power is on and red lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor is a 20...

Page 8 - Rev.3; Source D-Sub

4 Rev.3 B. "Hot Keys" for Quick Adjustment of Monitor Settings Figure 1-2: "Hot Keys" 1. Brightness adjustment " Hot Key ": Press this Z button to allow you to adjust the brightness of the LCD Monitor directly < > 50 2. Source select “ Hot Key : Press S button to allow ...

Page 9 - Rev.3; Adjusting the Tilting Angle; The LCD Monitor’s angle settings range from 0

5 Rev.3 Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 ° . 10 Figure 1-3: Tilting the Monitor 0 to 10

Page 10 - Rev.3; Power Management System

6 Rev.3 Connecting AC Power and PC Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. Figure 1-4: PC conenction Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-sav...

Page 11 - Rev.3; How to install the detacheable stand:; Please see the below drawing.

7 Rev.3 How to install the detacheable stand: Please see the below drawing.

Page 12 - Rev.3; The Display Controls; The LCD Monitor’s Control Panel; Hot key button; These buttons let you to adjustment volume and brightness; Menu: OSD Menu button

8 Rev.3 The Display Controls The LCD Monitor’s Control Panel Figure 2-1: The Control Panel 1. Hot key button Y & Z These buttons let you to adjustment volume and brightness of the LCD Monitor directly 2. Cursor Movement & Adjustment button - & + These buttons let you move vertical across...

Page 13 - Pressing the OSD Menu button causes the screen below to appear.; OSD Main SCREEN

9 Rev.3 Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the OSD Menu button causes the screen below to appear. 2. Use the - & + key to select the desired group, then press Menu key to the sub-menu 3. Repeat step 2 to select the changed item, then press - & + to change the value. 4....

Page 14 - 0 Rev.3; Auto Adjust Option

10 Rev.3 Auto Adjust Option The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. Note: it only apply for Analog RGB input Luminance -- Brightness and Contrast Adjustment. Brightness -- Adjusts the Brightness value Contrast ...

Page 15 - 1 Rev.3; Auto Color -- To adjust automatically the white balance display.

11 Rev.3 Color -- Color Temperature Adjustment Auto Color -- To adjust automatically the white balance display. 9300 -- Sets the color temperature to 9300K 6500 -- Sets the color temperature to 6500K 5800 -- Sets the color temperature to 5800K User Preset Red -- change Red gain for the color tempera...

Page 16 - 2 Rev.3; OSD – OSD Adjustment

12 Rev.3 OSD – OSD Adjustment H. Position -- Moves the OSD menu horizontally V. Position -- Moves the OSD menu vertically OSD Time -- Sets the OSD time ( 0 to 60 second ) Exit -- Return to the previous Menu Language -- The supported languages include English, French, German, Italian, Spanish, Japane...

Page 17 - 3 Rev.3

13 Rev.3 Miscellaneous Input selection -- To switch between analog and DVI port for PC signal input Sharpness -- The sharpness value can be set at 1. 2. 3. 4. 5. the factory default at 3. Display Information Exit -- Return to the previous Menu Exit – Exit the OSD screen

Page 18 - 4 Rev.3; ) No signal detected

14 Rev.3 Note: 1) No signal detected When the monitor is ON and there is no video signal received, the following message will be displayed No signal detected! 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 75HZ) the display will show the f...

Page 19 - 5 Rev.3; Appendix A; TFT LCD Monitor Specifications; Item Specification

15 Rev.3 Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 20.1" WSXGA+ Control Functions Power Software Power switch with LED indicator (ON/OFF) Main Menu Submenu Auto adjust Luminance Brightness/Contrast/ /Exit Geometry H.Position/V. Position/Pixel Clock/Phase/Exit Color A...

Page 20 - 6 Rev.3

16 Rev.3 Video Interface VGA Compatible Analog RGB DVI compatible signal Scanning Frequency H/V, Hz 31K-80K 60-75 Power Management Meets VESA DPMS Power Consumption (ON/OFF, W) 45W/1W Max. Dimensions WxHxD 18.72 x 16.14 x 6.89 in. (475.4 x 410 x 175mm) Net Weight (approx.) 16.256 lbs (6.4 Kg) Power ...

Page 21 - 7 Rev.3; Appendix B; Supported PC Timing; *Once a mode is optimized, there is no need to make any further

17 Rev.3 Appendix B Supported PC Timing Item Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 DOS 720x400 28.32 70.08 31.47 2 DOS 640x480 25.18 59.94 31.47 3 Macintosh 640x480 30.24 67.00 35.00 4 VESA 640x480 31.50 72.80 37.86 5 VESA 640x480...

Page 22 - 8 Rev.3; Supported Video mode

18 Rev.3 Supported Video mode Item Standards Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 720x480i 29.97 15.73 2 720x480P 59.94 31.46 3 1280x720P 60 45 4 1920x1080i 30 33.75 5 1920x1080P 60 67.5

Page 23 - 9 Rev.3; Appendix C; Troubleshooting; first apply the Auto Adjust option in the OSD menu.; PROBLEM: Display is unclear and unstable; If there is no display on the LCD, refer to the following:

19 Rev.3 Appendix C Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applying any of the foll...

Page 24 - 0 Rev.3; PROBLEM: The LCD displays “signal out of range” error message

20 Rev.3 PC’s VGA card may be out of the LCD’s synchronous range. Change to one of the alternate modes listed in Appendix B, or replace the VGA card and repeat steps 1 and 2. 4. If the power LED is not lit, check that the AC power connector is securely connected, and verify that the AC adapter LED i...

Sceptre X20WG-Naga - Manual

Table of Contents:

Summary

Other Sceptre Models