Sceptre SCEPTRE X22 - Manuals

Page6 SCEPTRE X22 After unpacking your LCD monitor, make sure the following items are included in the box and are in good condition: Package Contents Your SCEPTRE X22 package includes: Monitor Display x 1 User manual x 1 Warranty Card x 1 Power Cord x 1 VGA Cable x 1 DVI Cable x 1 3.5 mm Jack Audio ...

SCEPTRE X22 Page7 Specifications Display panel Item Illustration Active Area / Screen Size 473.76 mm x 296.1 mm Display Area (diagonal 22 inches) Aspect Ratio Widescreen 16:10 Max.of Pixels (Resolution) WXSGA+ – 1680*1050 Brightness 300 nits (Typical) Contrast 1200:1 (Typical) Response Time 5ms (Typ...

Page10 SCEPTRE X22 Opening the Package The SCEPTRE X22 is packaged in a carton together with other standard accessories. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective p...

SCEPTRE X22 Page11 Important Safety Guidelines This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenan...

Page14 SCEPTRE X22 Identifying Components The LCD Monitor － － － － Front View 1. Sceptre logo This is a silk screened “SCEPTRE” logo. 2. Monitor Stand 3. LCD Screen The LCD monitor is a 22 inch TFT 1680 x 1050 Wide WSXGA+ screen. 4. LED light Note: Power indicator: If light is blue, the monitor is tu...

SCEPTRE X22 Page15 How to install the detachable stand: Please see the drawing below.

Page16 SCEPTRE X22 Rear View 5. Connection To Device Port Includes two USB ports (USB 2.0) / Headset port (can be used by a headset or act as line out for external speakers) / Microphone port (by model) Refer to page 22 6. LCD Monitor Control Panel Refer to page 19 for more details. 7. Connection To...

SCEPTRE X22 Page17 Note: wall-mounted Wall-mount Illustration 1. Unplug all the cables and cords from the LCD monitor. 2. Place the LCD monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the display. 3. Remove 4 screws on the left and right hinge bracke...

SCEPTRE X22 Page19 Side View About control keys Power On/Off and LED LED – non : No A/C Power Plug-in LED – Blue : A/C power Plug in , and operating mode LED – Blue blinking: system under power saving mode Press VOL buttons to adjust the audio volume. Press this button to display the OSD (On-Screen ...

Page20 SCEPTRE X22 Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator starts blinking. Video Source Explained HDMI HD...

SCEPTRE X22 Page21 I/O Connector Definitions AC Power This connection is for providing power to the monitor. This connection uses a standard computer power cord. HDMI (High Definition Capable) This connection port receives audio and high definition signal through one single cable. It also doubles as...

SCEPTRE X22 Page23 Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 ° . 0 o to 10 o

Page24 SCEPTRE X22 Connecting AC Power and PC / VIDEO Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer.

Page26 SCEPTRE X22 3. HEADSET/LINE OUT (for Active Speakers) (By Model) You also can connect a set of active speakers (speakers which with built-in amplifier) for better sound effect when using HDMI port for viewing DVD. Connecting HDMI Port HDMI is for connecting HD Satellite, HD Digital Cable Set-...

Page28 SCEPTRE X22 OSD (On Screen Display Menu) The OSD Menu varies based on different input signal sources. The OSD menus provide different control functions, which allow users to optimize the picture/audio performances for each of the input signal sources. How to operate the OSD Menu: 1. Press the...

Page30 SCEPTRE X22 OSD screen instruction: Group icon descriptions: 1. GEOMETRY / VIDEO 2. PICTURE / ADVANCED 3. SYSTEM

SCEPTRE X22 Page31 VGA-PC input When VGA-PC is selected, the following OSD menu will be displayed when the MENU button is pressed. 1. GEOMETRY AUTO Auto fine tunes picture clock and position. H-POSITION Adjusts the display position left or right. Normally use Auto Adjust. V-POSITION Adjusts the disp...

Page32 SCEPTRE X22 2. PICTURE CONTRAST Adjusts the contrast between bright / dark graphics and text. BLACK LEVEL Adjusts brightness (DC Level) of the screen. COLOR TEMP. Selects color temperature among High, Middle, Low, or User modes. R GAIN Under User mode, adjusts how much red color is in the dis...

SCEPTRE X22 Page33 ASPECT This button selects the available screen aspect ratio to display. － － － － Native, Full Note: Native -- The picture is displayed with the original size, resolution and aspect ratio of the PC timing mode. Full -- Full screen of the picture is displayed with the maximum defaul...

SCEPTRE X22 Page35 Note: Native -- The picture is displayed with the original size, resolution and aspect ratio of the PC timing mode. Full -- Full screen of the picture is displayed with the maximum default size of 1680x1050 pixel. VOLUME Adjust the speaker volume level. INFORMATION This function d...

Page38 SCEPTRE X22 Appendix A － － － － Supported PC Timing Item Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 NEC PC98 640x400 21.05 56.42 24.83 2 MAC 13" mode 640x480 30.24 66.67 35.00 3 MAC 17" mode 1024x768 80.00 75.02 60.24 4 V...

Page40 SCEPTRE X22 Appendix B － － － － Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applyi...

Page42 SCEPTRE X22 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that my cause un...