Sceptre 2.1 - Manual

- 7 - Sound Bar 2.1 User Manual Sound Bar Remote & Extras This remote uses a lithium CR2025 battery. 1. POWER – Turns the Sound Bar on or off. 2. VOLUME (–) – Press this button to decrease the volume. 3. MOVIE – Press this button to switch to the MOVIE sound mode. 4. NEWS – Press this button to ...

- 9 - Sound Bar 2.1 User Manual Mounting the Sound Bar To mount the Sound Bar you need to have 400 mm of horizontal space on the wall. 1. Measure the length of 400mm on the wall. 2. With a pencil mark the two entry points where you are going to install the dry wall anchors and puncture the points wi...

- 11 - Sound Bar 2.1 User Manual Installing Batteries to the Remote Control Please insert one CR2025 lithium battery into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the batte...

- 12 - Sound Bar 2.1 User Manual Connection Suggestions If you have digital audio with your TV 1. Grab the included 3 head RCA audio cable and use the black colored RCA plug. 2. Find the SPDIF digital audio coax connection on the back of the TV and connect one end of the cable to it. 3. Connect the ...

- 13 - Sound Bar 2.1 User Manual If you have analog audio with your TV 1. Grab the included 3 head RCA audio cable and use the red and white colored RCA plug. 2. Find the analog audio out on the back of the TV and connect one end of the cable to it matching the colors red to red, and white to white....

- 14 - Sound Bar 2.1 User Manual If you have an audio device with your TV 1. Grab the included 3.5mm mini-jack cable. 2. Find the headphone jack connection on the audio device and connect one end of the cable to it. 3. Connect the other end of the cable to the back of the Sound Bar 2.1’s LINE IN con...

- 15 - Sound Bar 2.1 User Manual Operation TO SWITCH ON / OFF THE UNIT 1. Press the POWER button on the front panel or the RED button on the remote control to turn on the unit. If the unit is on you will see the display window show the source selected, volume level and sound mode. 2. Press the POWER...

- 16 - Sound Bar 2.1 User Manual How do I clean the Sound Bar? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the Sound Bar. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the Sound Bar. These types of chemicals might damage the housing . Cleani...

- 18 - Sound Bar 2.1 User Manual Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For mo...

- 19 - Sound Bar 2.1 User Manual Specification NAME UNITS Amplifier Power Output 2 x 15 W + 30 W (Subwoofer) @ 1% THD Frequency Response 20Hz – 20 KHz (+/-) 3dB Input sensitivity (mV) 500 mV rms Inputs SPDIF Coaxial (rear), Analog RCA (rear), 3.5 mm Mini-jack z H 0 6 / 0 5 , ~ V 0 4 2 – 0 1 1 e g a ...

- 20 - Sound Bar 2.1 User Manual LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available...

- 23 - Sound Bar 2.1 User Manual FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undes...