Page 2 - Page2 SCEPTRE E246; FCC Compliance Statement; Reorient or relocate the receiving antenna.; always use the signal cord and power cord supplied with this
Page2 SCEPTRE E246 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation...
Page 4 - Page4 SCEPTRE E246; Important Information
Page4 SCEPTRE E246 Important Information Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in...
Page 5 - Tips and Safety Precautions
SCEPTRE E246 Page5 Tips and Safety Precautions This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenan...
Page 6 - Page6 SCEPTRE E246
Page6 SCEPTRE E246 • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • The wall socket should be installed near the equipment and should be easily accessible. • Only the marked power source can be used for the product. Any power source other than t...
Page 7 - Table of Contents
SCEPTRE E246 Page7 Table of Contents Important Information ......................................................................................................................... 1 FCC Compliance Statement ...............................................................................................
Page 8 - Page8 SCEPTRE E246
Page8 SCEPTRE E246 Dear SCEPTRE Customer, Congratulations on your new LED backlit SCEPTRE monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LCD monitor, please read the manual carefully before making any adjustments, and keep them in a sa...
Page 10 - Page10 SCEPTRE E246; Setting Up Your Monitor
Page10 SCEPTRE E246 Setting Up Your Monitor The following are general short steps to setup and use the monitor with your PC under the Microsoft Windows XP operating system. 1. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and turn on the PC and the monito...
Page 11 - Identifying Front and Rear Panel; Rear View Connections
SCEPTRE E246 Page11 Identifying Front and Rear Panel Front View POWER INDICATOR : If light is blue, the monitor is turned on. If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION : This monitor’s clearest picture is produced under it...
Page 12 - Page12 SCEPTRE E246; Control Buttons; Understanding Your Cables & Connections; Cable Picture
Page12 SCEPTRE E246 Control Buttons This monitor features touch sensors instead of buttons. 1. [1] – This button turns the On Screen Display (OSD) on or off. 2. ▼ – While in the OSD this button acts as a navigation button moving your selection to the next one. If you entered the function this button...
Page 13 - Connecting the LCD; If You Have DVI Connection on Your Video Card...
SCEPTRE E246 Page13 Connecting the LCD If You Have DVI Connection on Your Video Card… 1. Make sure the power of E246 LCD MONITOR is turned off. 2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your E246 LCD MONITOR. 3. Turn on the power of bot...
Page 15 - If You Have HDMI Connection on Your Cable or Satellite Box...
SCEPTRE E246 Page15 If You Have HDMI Connection on Your Cable or Satellite Box… 1. Make sure the power of the E246 LCD MONITOR is turned off. 2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the cable or satellite box. 3. Turn on the power of bot...
Page 16 - Page16 SCEPTRE E246; AUTO IMAGE ADJUST
Page16 SCEPTRE E246 On Screen Display (OSD) Menu The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast, screen settings…..etc. When you press the [1] button on the monitor, the OSD screen will appear. Select each of the functions with the ▲ or ▼...
Page 17 - CONTRAST / BRIGHTNESS
SCEPTRE E246 Page17 CONTRAST / BRIGHTNESS This function adjusts the brightness and contrast of the LCD. 1. To use this function, press [1] to open the OSD then highlight CONTRAST / BRIGHTNESS function by pressing the ▲ or ▼ button. 2. Press [2] to enter the function. 3. Press ▲ or ▼ button to select...
Page 18 - AUDIO ADJUST
Page18 SCEPTRE E246 INPUT SELECT This function selects the source of the monitor. 1. Press [1] to open the OSD then highlight INPUT SELECT by pressing the ▲ or ▼ buttons. 2. Press [2] to enter the function. 3. Press the ▲ or ▼ buttons to select the source you want to change to. Please Note: • AUTO i...
Page 19 - COLOR ADJUST; INFORMATION
SCEPTRE E246 Page19 COLOR ADJUST This function adjusts the overall balance of white colors in a picture in large increments. Color temperature consists of 5400K, 6500K, 9300K, and USER COLOR. 1. Press [1] to open the OSD then highlight COLOR ADJUST by pressing the ▲ or ▼ buttons. 2. Press [2] to ent...
Page 21 - SETUP MENU; MEMORY RECALL
SCEPTRE E246 Page21 SETUP MENU This function allows you to change the language of the OSD and adjust the OSD options. 1. Press [1] to open the OSD then highlight SETUP MENU by pressing the ▲ or ▼ buttons. 2. Press [2] to enter the function. 3. Press the ▲ or ▼ buttons to select the option you want t...
Page 22 - Page22 SCEPTRE E246; Supported PC Resolution; STD; Supported Video Resolution; VIDEO RESOLUTION
Page22 SCEPTRE E246 Supported PC Resolution STD RESOLUTION & REFRESH RATE VGA 720 x 400 @ 70Hz VESA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VES...
Page 23 - Troubleshooting; Problem
SCEPTRE E246 Page23 Troubleshooting Problem Possible solutions DISPLAY IS UNCLEAR AND UNSTABLE To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 X 1080 at 60Hz, then AUTO ADJUST. THERE IS NO LCD DISPLAY or SCREEN SAYS N...
Page 26 - Page26 SCEPTRE E246; How do I clean the LCD?; The power cable has to be removed from the socket before cleaning
Page26 SCEPTRE E246 How do I clean the LCD? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the TV. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LCD glass. Cleaning the bezel 1. ...
Page 27 - Specification
SCEPTRE E246 Page27 Specification Display panel Item Illustration Active Area / Screen Size diagonal 23.6 inches 521.3mm x 293.2mm Aspect Ratio Widescreen 16 : 9 Pixel Pitch 0.27 (h) x 0.27 (v) mm Resolution Native: 1920x1080 Brightness 250 nits Contrast 1000:1 (NATIVE) 5,000,000:1 (DCR) Response Ti...
Page 28 - Page28 SCEPTRE E246; Call Us If You Need Help!; Customer Service Email :
Page28 SCEPTRE E246 Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more informatio...
Page 30 - Page30 SCEPTRE E246
Page30 SCEPTRE E246 LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from ...
Page 31 - Disclaimer & Copyright Information
SCEPTRE E246 Page31 Disclaimer & Copyright Information Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. HDCP ...
