Page 3 - Table of contents
2 GB Table of contents Important safety instructions ............................................... 3-4Introduction .............................................................................. 5Controls .............................................................................. 6-10Remote cont...
Page 4 - Important Safety Instructions
3 Important Safety Instructions 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions ...
Page 6 - Introduction
5 Introduction The Sangean WR-5 AM/FM-RDS/iPod Dock Wooden Table-topReceiver provides the following range of features: Radio for AM and FM (with RDS) broadcasts. 12 radio station presets (6 for AM, 6 for FM). Large LCD display with adjustable backlight. Two alarm timers with snooze feature to wake y...
Page 7 - Controls
6 GB 1.2. SpeakersLCD display Remote control sensor 3. Controls
Page 10 - Display icons
9 Display icons A.B.C.D.E.F.G.H. Battery capacity indicatorPM indicatorTime displaySleep timer iconAlarm 1 iconAlarm 2 iconFrequency / information for station displayRDS icon
Page 11 - Remote control
10 GB Remote control a.b.c.d.e.f.g.h.i.j.k.l.m.n.o.p.q.r. Back forwardRepeat one / allTuning upFolder up / preset upFolder down / preset downTuning downMuteSnooze / dimmerToneVolume downVolume upRepeat randomSelectFast forwardPlay / pauseSourceMenuStandby / Sleep timer
Page 13 - Using the radio for the first time; Using the AC power adaptor; Getting started with external accessories
12 GB Using the radio for the first time Using the AC power adaptor The AC power adaptor required for this unit should be 12 volts ACat 1.6A. Insert the adaptor plug into the AC socket on the rear of the radio.Plug the adaptor into a standard mains socket outlet. The AC adaptor should be disconnecte...
Page 14 - Operating your radio – Search tuning AM/FM
13 Operating your radio – Search tuning AM/FM 1. Press the Standby button to switch on your radio. 2. Press the Source button as needed until the AM or FM band is selected. 3. Press and release the Seek / Select button to carry out an auto-tune. Your radio will scan up the AM/FM band from the curren...
Page 15 - Manual tuning – AM/FM
14 GB Manual tuning – AM/FM 1. Press the Standby button to switch on your radio. 2. Press and release the Source button to select AM or FM radio mode. 3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 100kHz/50kHz and AM frequency will change in steps of 10k...
Page 16 - Setting up the tuning step increment
15 Setting up the tuning step increment 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until FM 50/100MHz or AM 9/10kHz appears on the display, and press and release the Seek / Select button to enter the step increment setting. 3. Rotate the Tuning con...
Page 17 - Display modes – FM
16 GB Display modes – FM Your radio has a range of display options for FM radio mode. 1. Repeatedly press and release the Info/menu button to view the RDS information of the station you are listening to. a. b. c. d. e. f. g. Displays the name of the station being listened to. Displays the type of st...
Page 19 - Presetting stations in AM/FM mode; Recalling a preset in AM/FM mode
18 GB Presetting stations in AM/FM mode There are 6 preset stations each for AM and FM radio. They are used inthe same way for each waveband. 1. Press the Standby button to switch on your radio. 2. Press the Source button to select the desired waveband. Tune to the required radio station as previous...
Page 21 - Charging your iPod
20 GB Charging your iPod 1. Place the iPod onto the Universal Dock Adjuster into the iPod docking compartment. Press the STANDBY button to switch on your radio. 2. Press SOURCE button until “iPod” shows on the display. Your radio is able to recharge your iPod’s internal battery when the source is Au...
Page 22 - Navigating your iPod
21 Navigating your iPod To navigate your iPod menus to make selections or to change settings,you should use your iPod controls. The radio controls can be used forMenu / Select, Previous / Next, Fast Rewind / Fast Forward andPlay / Pause functions. 1. Use the Menu button to navigate to higher level m...
Page 24 - Clock and Alarms; Setting the time format
23 Clock and Alarms Setting the time format The clock display used in stand-by mode and on the playing modescreens can be set to 12 or 24 hour format. The selected format isthen also used when setting the alarms. 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning ...
Page 25 - Setting the date format
24 GB Setting the date format 1. Press and hold the Info/menu button to access the menu setting. 2. Rotate the Tuning control until date format ex. “Jan-xx-2010” shows on the display. Press and release the Seek / Select button to enter the date format setting. 3. Rotate the Tuning control to select ...
Page 26 - Setting the clock time manually
25 Setting the clock time manually 1. Press the Standby button to switch on your radio. 2. Press and hold the Info/menu button. 3. Rotate the Tuning control until a clock symbol appears on the left side display, then press and release the Seek / Select button to enter the setting. Rotate the Tuning ...
Page 27 - Setting the clock time using RDS CT
26 GB Setting the clock time using RDS CT 1. When tuning to a station transmitting RDS data, press and hold the Info/menu button. 2. Rotate the Tuning control until a clock symbol appears on the display. Press and release the Seek / Select button to enter the setting. 3. Rotate the Tuning control un...
Page 28 - Setting the alarm clock
27 Setting the alarm clock Your WR-5 has two alarms which can each be set to wake you toAM/FM radio, buzzer alarm or iPod. The alarms may be set while theunit is in standby mode or while playing. 1. Before setting an alarm ensure that the clock time is set. Press and hold the Alarm 1 button to enter...
Page 31 - Snooze
30 GB Snooze 1. When the alarm sounds, press any button other than the Standby button will silence the alarm for 5 minutes. “SNOOZE’ will appear on the display. 2. To adjust the silence time for the snooze timer, press and hold the Info/menu button to enter the menu setting. 3. Rotate the Tuning con...
Page 32 - Sleep timer
31 Sleep timer Your radio can be set to turn off automatically after a preset timehas elapsed. The Sleep Timer setting can be adjusted between15, 30, 45, 60, 90 and 120 minutes. 1. Press and hold the Standby button to enter the Sleep Timer setting. “SLEEP XX” will show on the display. 2. Keep pressi...
Page 33 - Time zone setting; Daylight Saving Time
32 GB Time zone setting Your WR-5 can set up the time zone for its radio clock time. 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until TIME ZONE appears on the display. Press and release the Seek / Select button to enter the setting. 3. Rotate the T...
Page 34 - Display & Audio setup; Dimmer control; Tone control
33 Display & Audio setup Dimmer control The brightness of the display may be adjusted. If you use the unit inthe bedroom, you may prefer a higher brightness level than thestandard setting. 1. Press and release the Snooze/Dimmer button repeatedly to adjust the brightness level of the LCD display....
Page 35 - Loudness
34 GB Loudness You can get compensation on lower and higher frequency for your WR-5by adjusting the Loudness function. 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until LOUD ON/OFF appears on the display. Press and release the Seek / Select button t...
Page 36 - D surround sound expander
35 3D surround sound expander Your WR-5 allows you to get more spaciousness in the soundperformance with the 3D surround expander function. 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until 3D ON/OFF appears on the display. Press and release the See...
Page 38 - Software version
37 Software version The software display cannot be altered and is just for your reference. 1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until VER 1.XX appears on the display to view the software version of your radio. Note: Most of the remote control...
Page 39 - Specifications; Power Requirements; Circuit Features
38 GB If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not bedisposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recyclingadvice. (Waste Electrical and Elect...
