Samsung UD55D - Manual

6 Before Using the Product Chapter 01 Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of...

7 Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPENCaution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)THERE ARE NO USER SERVICEABLE PARTS INSIDE.REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.It is dangerou...

9 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power s...

11 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Center for repairs. ! Before moving the product, turn off the power switch and disconnect the power cab...

14 Preparations Chapter 02 Checking the Contents Removing the Packaging ― The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Remove the protective packaging from the box. 2 Cut the strap and open the box. UP UP 3 Separate the box from the...

15 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. To install a stand, you can purchase one separately. Components ― Component...

16 Items sold separately - The following items can be purchased at your nearest retailer. Wall-mount Kit Stand RS232C cable ( P.54 ) DVI cable ( P.42 ) HDMI-DVI cable ( P.43 ) D-SUB cable ( P.42 ) HDMI cable ( P.43 ) Video cable ( P.46 ) Stereo cable ( P.23 ) Component cable ( P.46 ) RCA stereo cabl...

17 Parts External sensor KIT ― The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a wall, you can move the External sensor KIT to the side of the display. ― The color and shape of parts may differ from what is shown. Specification...

18 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. IR OUT CONTROL IN DP IN HDMI IN 1 HDMI IN 2 DVI IN (MAGICINFO) AV / COMPONENT AUDIO OUT IN RJ 45 RS232C OUT RS232C OUTRS232C OUTRS232C OUTRS232C OUTRS...

19 Attaching the holders ― Fix the holders into on the back of the product using the screws. ― When displays are connected to form a video wall, the holders will make the gap between displays uniform on all four sides. Anti-theft Lock ― An anti-theft lock allows you to use the product securely even ...

20 - Remote control button functions may differ for different products. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not ...

21 TOOLS INFO Magicinfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting.Confirm a menu selection. Exit the current menu. Manually select a connected input source from PC , DVI ,...

22 Adjusting the OSD with the Remote Control Buttons Description 1 Open the OSD menu. 2 Select from Picture , Network , System or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 Finish setting. 5 Close the onscreen display (OSD) menu. Remote Control Reception Range 30 ˚ 30 ...

23 Connection Using an IR Stereo Cable (sold separately) ― Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device. Controlling more than one display product using your remote control • Connect the IR OUT port on the product to the IR / AMBIENT SENSOR...

24 Before Installing the Product (Installation Guide) 15 ˚ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause pers...

25 A B C E Figure 1.3 Top view D D Figure 1.2 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Center for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an ind...

26 Installing the Wall Mount 1 Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring( 1 ). Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall.For detailed information on installing the...

28 Remote Control (RS232C) Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect dat...

29 • RS232C cableConnector: 9-Pin D-SubCable: Cross cable 1 5 1 5 9 6 9 6 -P1- -P2- -P1- -P1- -P2- -P2- Female RxTxGnd 235 --------><------------------ 325 TxRxGnd Female LAN Cable • Pin assignment 1 2 3 4 5 6 7 8 Pin No Standard Color Signal 1 White and orange TX+ 2 Orange TX- 3 White and gre...

31 Connection • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 MDC RJ45 MDC • Connection 3 RJ45 RS232C OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT

32 Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volu...

33 Power control • FunctionA product can be powered on and off using a PC. • Viewing power state (Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Pow...

34 Input source control • FunctionThe input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 &...

35 Screen mode control • FunctionThe screen mode of a product can be changed using a PC.Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command ID Data lengt...

36 PIP On/Off control • FunctionThe PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if Video Wall is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON...

37 Video Wall Mode Control • Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Vi...

39 5x5 Video Wall Model 1 2 3 4 5 Off 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 2 0x21 0x22 0x23 0x24 0x25 3 0x31 0x32 0x33 0x34 0x35 4 0x41 0x42 0x43 0x44 0x45 5 0x51 0x52 0x53 0x54 0x55 10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00...

41 Connecting and Using a Source Device Chapter 03 Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ― Befor...

42 Connecting to a PC • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • A PC can be connected to the product in a variety of ways.Select a connection method suitable for your PC. ― Connecting parts may di...

43 Connection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN 1, HDMI IN 2 AUDIO IN DVI OUT AUDIO OUT Connection Using an HDMI Cable HDMI IN 1, HDMI IN 2 HDMI OUT Connection Us...

44 Changing the Resolution ― Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. ― The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings , and...

45 Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution , and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution , and change the resolution.

46 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...

47 Connection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HD...

48 Connecting to an Audio System ― Connecting parts may differ in different products. AUDIO OUT AUDIO IN Connecting an External Monitor ― Connecting parts may differ in different products. DP OUT DP IN

49 Connecting the network box (Sold separately) ― For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. MagicInfo To use MagicInfo , a network box (sold separately) must be connected to the product. ― To change the MagicInfo settings,...

51 Changing the Input source Source MENU m : T Support Contents Home Source ENTER ---- ---- ---- ---- ---- ---- ---- Source HDMI1 HDMI2 AV Component DisplayPort PC DVI Tools Return - The displayed image may differ depending on the model. Source allows you to select a variety of sources and change so...

52 Using MDC Chapter 04 Configuring Settings for Multi Control MENU m → System → Multi Control → ENTER E Assign an individual ID to your product. Configuring settings for Multi Control • ID Setup Assign an ID to a set. (Range: 0~99)Press ▲ / ▼ to select a number, and press E . • ID Input Enter the I...

53 MDC Program Installation/Uninstallation Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. 3 Select a language for installation. Next, click " OK ". 4 When the " Welcome to the InstallShield Wizard for MDC_Unified " scree...

54 What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports ...

55 Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 port on the product and the LAN por...

56 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT port on the product. RS232C OUT RJ45 MDC Monitor 2 Monitor 1 Computer

57 Connection Management Connection management includes the Connection list and Connection list modification options . Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID Range , and ...

58 User Login Launching the program displays the user login window.The initial login ID ( Username : admin ) and password ( password : admin ) are set to admin . ― After logging in for the first time, make sure to change the password to ensure security. ― To change the password, go to Home > User...

61 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value ...

62 Getting Started with MDC 1 To start the program, click Start Programs Samsung MDC Unified . The login window appears after the MDC program is launched.Enter the user ID and password. • The default user ID and password are admin . • Make sure to change the password after the first login. 2 Click A...

63 Main Screen Layout 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Category View a list of connected display devices or device groups. 3 Schedule Category View a list of schedules for display devices. 4 Set List Select the display device you...

65 User Login User Settings • Add, delete or edit login information. Logout • Log out from the current user account as follows. • Click Logout . The message " Do you want to log admin out? " is displayed • Click Yes . The user login window appears. • If you do not want to log in, click Close...

66 Color - Color and Tint (G/R) are not available if the input source is PC . - Color , Tint (G/R) , Color Tone and Color Temp. are not available if both PC Source and Video Source are selected. Color • Adjust the colors for the selected display device. Tint (G/R) • Adjust the tint for the selected ...

68 Advanced features 3D Control 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. 3D 2D Displays the image for the left eye only. 3D Auto View If you set 3D Auto View to Message Notice , a pop up message window appears when the product receives a 3D signal. 3D Optim...

69 Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary color intensity. RGB Only Mode Displays the Red , Green and Blue color for making fine adjustments to the hue and saturation. Flesh Tone Emphasize pink “Flesh Tone.” Motion Lighting Reduces power consu...

70 Sound Adjustment - The Bass or Treble item will be disabled if the item is not supported by the selected set. You can change the sound settings.Choose display devices from the list of sets, and select the Sound tab. Bass • Adjust the bass for the selected display. Treble • Adjust the treble for t...

71 Format • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row. ― A maximum of 6 can be assigned to V if 15 is assigned to H . V • Select the number of vertical display devices. • A maxi...

72 General User Auto Color • Automatically adjust the screen colors. ― Available only in PC mode. Auto Power • Set the product to automatically power on. Standby Control • Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required to de...

73 Security Safety Lock • Lock the on-screen menus. ― To unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the display device. ― To unlock the buttons, set Button Lock to Off . OSD Display Source OSD • Select whether to display a message when the Source is changed. Not Opt...

74 Time Clock Set Change the current time on the selected display device according to the time set on a PC.If the time is not set on the display device, null values will be displayed. Timer On Timer • Repeat : Specify the period for which you want to repeat the selected Timer . Once , EveryDay , Mon...

75 Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu. • Add : You can specify holidays. Click the Add button in th...

76 Screen Saver ― Period (Hour) and Time (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configured when Interval is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer : Y...

78 Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the screen. Timer Set the Start Time and End Time to display a message ( Message ). Position Select an orientation to displa...

79 Tool Settings Security • Panel Control : Turn on or off the screen of a display device. • Remote Control : Enable or disable the remote control. • Virtual Romete Control : Control a device from a PC using the virtual remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound...

80 Edit Column Options Configure the settings for the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language. • Command Retry Count : Specify the number of retry ...

81 Monitor Window A window appears showing details for data transfer between the computer and display devices. • Filter View the program information. Information

82 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear.Move the arrow to customize the size of the program window.

83 Group Management Creating Groups Create groups and manage the list of sets on a group basis. ― Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side of the program window. - The Add on the same level button is enabled only if...

84 • Add on the sub level : Create a sub-group under the selected group. 3 Enter the group name. Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted.

85 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new group name. Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule Lis...

87 Troubleshooting Guide - This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. Issue Solution The display you want to control does not appear on the system information chart. 1 Check the con...

88 How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for I...

89 Screen Adjustment Configure the Picture settings ( Backlight , Color Tone , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 Picture Mode MENU m : T Picture Picture Mode ENTER Select a picture mode ( Picture Mode ) suitable for the environment where th...

90 Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU m : T Picture ENTER · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Color Tint (G/R) Information 60 70 45 50 50 R 50 G 50 - The displayed image may differ depending on the model. Your product has seve...

92 Picture Sizes available by Input Source. Input Source Picture Size AV , Component (480i, 480p) 16:9 , Zoom1 , Zoom2 , 4:3 , Custom Component (1080i, 1080p) 16:9 , 4:3 , Wide Fit , Screen Fit , Custom HDMI1 , HDMI2 (720p, 1080i, 1080p) 16:9 , 4:3 , Smart View 1 , Smart View 2 , Custom , Wide Fit ,...

93 Position · Screen Adjustment Picture Size Position Zoom1 PC Screen Adjustment Resolution Select Off - The displayed image may differ depending on the model. Adjusts the picture position. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , Screen Fit or Custom . ― To us...

94 PC Screen Adjustment · Screen Adjustment Picture Size Zoom/Position Custom Off PC Screen Adjustment Resolution Select - Available in PC mode only. - The displayed image may differ depending on the model. • Coarse / Fine Removes or reduces picture noise.If the noise is not removed by Fine-tuning a...

95 Auto Adjustment MENU m : T Picture Auto Adjustment ENTER Picture Auto Adjustment - Available in PC mode only. - The displayed image may differ depending on the model. Adjust frequency values/positions and fine tune the settings automatically. Rotation MENU m : T Picture Rotation ENTER · Picture R...

96 Aspect Ratio MENU m : T Picture Aspect Ratio ENTER · Picture Rotation Aspect Ratio Landscape Full Screen - The displayed image may differ depending on the model. Set the rotated screen to be either full screen or original. • Full Screen : Display the rotated screen in full screen. • Original : Di...

97 Advanced Settings MENU m : T Picture Advanced Settings ENTER Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Color Space White Balance 10p White Balance Medium Off 0 Off Native Off - The displayed image may differ depending on the model. Input Source Picture Mode Advanced S...

99 Advanced Settings White Balance 10p White Balance Gamma Expert Pattern Motion Lighting Off 0 Off Off - The displayed image may differ depending on the model. White Balance Adjust the color temperature for a more natural picture. • R-Offset / G-Offset / B-Offset : Adjust each color’s (red, green, ...

100 Advanced Settings White Balance 10p White Balance Gamma Expert Pattern Motion Lighting Off 0 Off Off - The displayed image may differ depending on the model. Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu ...

101 Picture Options MENU m : T Picture Picture Options ENTER Picture Options Color Tone Color Temp. Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode Calibrated Value Standard 10000K Off Off Normal Off Off - The displayed image may differ depending on the model. Select an option usin...

103 Picture Options Film Mode Calibrated Value Dynamic Backlight Off Don't Apply Off - The displayed image may differ depending on the model. Film Mode This mode is suitable to view movies.Sets the product to automatically sense and process film signals from all sources and adjust the picture for op...

104 Network Chapter 06 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. • You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.See the diagram below. The Modem Port on t...

105 • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewher...

106 How to set up manually 1 Go to the Network Settings screen. Select Start , press , and then press again. 2 The network test screen appears and the verification process starts. Press Stop . The verification process stops. 3 Select IP Settings on network connection screen. The IP Settings screen a...

107 ― The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product. Wireless Network Setting Automatic Network Setup Most wireless networks have an optional security system that ...

109 Network Status MENU m : T Network Network Status ENTER You can check the current network and Internet status. ***.***.***.***. ***.***.***.***. ***.***.***.***. ***.***.***.***. 00 : 12 : fb : df : 29 : 76 Network Status Your wireless network and Internet connection are setup and ready to use. M...

110 Soft AP MENU m : T Network Soft AP ENTER Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct . Set the options for connection of Wi-Fi device. • Soft AP Turns on or off the Soft AP . When Soft AP is set to On , your mobile de...

111 System Chapter 07 Multi Control MENU m : T System Multi Control ENTER -- Multi Control ID Setup ID Input MDC Connection DisplayPort Daisy Chain 00 RS232C MDC Clone - The displayed image may differ depending on the model. Configuring settings for Multi Control • ID Setup Assign an ID to a set. (R...

112 Time MENU m : T System Time ENTER 끄기 Time Clock Set Sleep Timer On Timer Off Timer Holiday Management Off - The displayed image may differ depending on the model. You can configure Clock Set or Sleep Timer . You can also set the product to automatically turn on or off at a specified time using t...

114 Time On Timer Off Timer Holiday Management - The displayed image may differ depending on the model. Off Timer Set the off timer ( Off Timer ) by making a selection from one of the seven options. ( Off Timer1 ~ Off Timer7 ) ― You must set the clock before you can use Off Timer . • Setup : Select ...

115 Menu Language MENU m : T System Menu Language ENTER System Time Menu Language Rotate Menu Eco Solution Caption English Landscape Off ― The displayed image may differ depending on the model. Rotate Menu MENU m : T System Rotate Menu ENTER System Time Menu Language Rotate Menu Eco Solution Caption...

116 Eco Solution MENU m : T System Eco Solution ENTER Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off Off Off Off Off - The displayed image may differ depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness.Selecting Picture Off ...

117 Caption MENU m : T System Caption ENTER Caption Caption Caption Mode Digital Caption Options Off - The displayed image may differ depending on the model. Caption You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. • Off / On ― T...

118 Security MENU m : T System Security ENTER Security Safety Lock Button Lock Change PIN Off Off - The displayed image may differ depending on the model. Every time you access the Security functions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0...

119 PIP MENU m : T System PIP ENTER System PIP Auto Protection Time Screen Burn Protection Ticker Video Wall Off Off Off - The displayed image may differ depending on the model. - For PIP sound, refer to the Sound Select instructions. - If you turn the product off while watching in the PIP mode, PIP...

120 Auto Protection Time MENU m : T System Auto Protection Time ENTER System Auto Protection Time Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings Off Off - The displayed image may differ depending on the model. If the screen displays a still image for a certain period of time you...

121 Screen Burn Protection MENU m : T System Screen Burn Protection ENTER Screen Burn Protection Pixel Shift Timer Immediate Display Side Gray Off Off Off Off - The displayed image may differ depending on the model. To reduce the possibility of screen burn, this unit is equipped with Pixel Shift scr...

123 Screen Burn Protection Pixel Shift Timer Immediate Display Side Gray Off Off Off Off - The displayed image may differ depending on the model. Ticker MENU m : T System Ticker ENTER System Auto Protection Time Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings Off Off - The displa...

124 Video Wall MENU m : T System Video Wall ENTER · · · · Video Wall Video Wall On Format Horizontal Vertical Screen Position Full 1 1 - The displayed image may differ depending on the model. - The Video Wall option is only enabled when PIP is set to Off . - If more than four displays are connected ...

125 · · · · Video Wall Video Wall On Format Horizontal Vertical Screen Position Full 1 1 - The displayed image may differ depending on the model. Vertical This function automatically divides the screen according to the specified number of vertical displays.Enter the number of vertically arranged dis...

126 Source AutoSwitch Settings MENU m : T System Source AutoSwitch Settings ENTER · · · Source AutoSwitch Settings Source AutoSwitch Primary Source Recovery Primary Source Secondary Source On Off PC All - The displayed image may differ depending on the model. Turning on the display with Source AutoS...

127 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. • Off / On ― Available only PC , DVI , HDMI1 , HDMI2 , DisplayPort mode. Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a ...

128 General Sound Feedback Auto Power Standby Control Lamp Schedule OSD Display Power On Adjustment Temperature Control Low Off Auto 0 sec Off - The displayed image may differ depending on the model. Sound Feedback Your product gives sound feedback when you use product. Sound Feedback is enabled by ...

129 General Sound Feedback Auto Power Standby Control Lamp Schedule OSD Display Power On Adjustment Temperature Control Low Off Auto 0 sec Off - The displayed image may differ depending on the model. Lamp Schedule Enables the lamp value to be adjusted to a user-specified value at a specified time in...

130 Anynet+ (HDMI-CEC) MENU m : T System Anynet+ (HDMI-CEC) ENTER Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto Turn Off Receiver On Yes Off - The displayed image may differ depending on the model. - The Anynet+ functions do not operate with other manufacturers’ products. - For instructions explaining ...

131 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto Turn Off Receiver On Yes Off - The displayed image may differ depending on the model. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. • Yes / No ― If Auto Turn Off is set to Yes , running external device...

132 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connectio...

134 DivX ® Video On Demand MENU m : T System DivX ® Video On Demand ENTER System DivX ® Video On Demand - The displayed image may differ depending on the model. Shows the registration code authorized for the product. If you connect to the DivX Ⓡ web site and register using that code, you can downloa...

135 Magic Clone MENU m : T System Magic Clone ENTER Magic Clone Clone to USB Clone From USB - The displayed image may differ depending on the model. Export the product settings to a USB device or load the settings via a USB device.This option is useful when assigning the same settings to several pro...

136 Reset All MENU m : T System Reset All ENTER System Reset All - The displayed image may differ depending on the model. This option returns all the current settings for a display to the default factory settings. PC Module Power MENU m : T System PC Module Power ENTER System PC Module Power - The d...

137 Support Chapter 08 Software Update MENU m : T Support Software Update ENTER The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing...

138 Contact Samsung MENU m : T Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software.You can find information regarding our call centers and how to download products and software. ― Contact Samsung and find the product M...

139 Contents Home MENU m : T Support Contents Home ENTER Support Contents Home - The displayed image may differ depending on the model. MagicInfo Lite MENU m : T Support Contents Home MagicInfo Lite ENTER ― MagicInfo Lite can also be accessed by pressing MagicInfo Lite/S on the remote control. ― To ...

140 - The input source can also be changed by using the SOURCE button on the remote control. AllShare Play MENU m : T Support Contents Home AllShare Play ENTER Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. ― Refer to P.141 for details about the AllShare Play menu....

141 AllShare Play Chapter 09 What is AllShare Play? Play photo, video or music files saved on a storage device. Wirelessly connect a smartphone to a PC using a wireless network.Play various content using one of the following methods in AllShare Play : • Using internal memory and a USB device: Play v...

142 Compatible devices with AllShare Play • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. • AllShare Play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices in...

143 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly. Select type of conte...

144 Connecting to a PC over a network Play photo, video and music files saved on a PC through a network connection in AllShare Play mode.. • For details on how to configure a network, refer to the section Network Settings . • To view content saved on the PC, connect the product and PC to the same wi...

145 Using the AllShare Play features If you connect the product and a source device such as a cell phone or PC to the same network, you can play media content saved on the device such as videos, photos and music. Visit http://www.samsung.com or contact the Samsung Electronics Customer Center for mor...

146 Using the Basic AllShare Play Features MENU m → Support → Contents Home → AllShare Play → ENTER E AllShare Play / My List/ My List Videos Photos Music Recently Played What's New Playlist Recently played files will be displayed here. Updated files will be displayed here. No playlists have been cr...

147 Playing Selected Files 1 Select files from the list of Videos , Photos , or Music files. 2 Press TOOLS on the remote control and select Selection Play . ― The option does not appear if a folder is highlighted by the cursor. 3 Select files and press Play . ― c appears for selected files. ― To sel...

148 My List MENU m → Support → Contents Home → AllShare Play → My List → ENTER E Access desired content more conveniently and quickly.To play files, select files or a Playlist and press E . • Recently Played : Display video, photo or music files that were recently played. This mode is suitable when ...

149 Videos MENU m → Support → Contents Home → AllShare Play → Videos → ENTER E Playing a Video 1 Select the internal memory or a USB device. Select files from the list of files. 2 Press the E button or ∂ (Play) button. • The file name appears on the top with its playing time. • If video time informa...

150 Photos MENU m → Support → Contents Home → AllShare Play → Photos → ENTER E Viewing a Photo (or Slide Show) 1 Select the internal memory or a USB device. Select a file from the list of files. 2 Press the E button. • To view files manually, one at a time, press the left or right arrow buttons. • T...

151 Music MENU m → Support → Contents Home → AllShare Play → Music → ENTER E Playing Music 1 Select the internal memory or a USB device. Select files from the list of files. 2 Press the E button or ∂ (Play) button. • When the music is playing, you can search using the π (REW ) and µ (FF) button. ― I...

154 Supported Subtitle and AllShare Play file formats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.srt) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Powerdivx (.psb) • XsubContainer: AVI • SubStation A...

155 Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek (jump) function is not supported.Supports up to 2 channel Supported Video Formats • Video content will not play, or not play correctly, if...

157 MagicInfo Lite Chapter 10 File Formats Compatible with MagicInfo Lite Player Read before using MagicInfo Lite Player • Supported file systems include FAT32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.Check the vertical and hori...

158 Contents File Extension Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec *.avi*.mkv*.asf*.wmv*.mp4*.mov*.3gp*.vro*.mpg*.mpeg*.ts*.tp*.trp*.flv*.vob*.svi*.m2ts*.mts*.divx AVIMKVASFMP43GPVROVOBPSTS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3LPCMAACHE-AACWMADD+MPE...

163 7 Enter the information required to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group. • Location : Enter the current location of the device. ― Pressing the INFO button on the remote when a network schedule is running will display the details...

164 MagicInfo Lite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― To launch MagicInfo Lite , select MagicInfo Lite for the Player Mode on the System . ― Press the MagicInfo Lite/S button on the remote control. MagicInfo Lite Player Network Schedule You can view whether the server is c...

165 Local Schedule MagicInfo Lite Player Network Schedule Local Schedule Internal AutoPlay USB AutoPlay Mode Local Schedule Server Connected USB Connected Return Close Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run → Run 1 Select Local Schedule...

166 USB AutoPlay MagicInfo Lite Player Network Schedule Local Schedule Internal AutoPlay USB AutoPlay Mode Local Schedule Server Connected USB Connected Return Close ― To enable and use the option, ensure at least one content file is saved in the " MagicInfoSlide " folder on the USB device. ...

167 Local Schedule Manager Configure the settings for playback from Local Schedule . Alternatively, select and play content from internal or USB memory according to the customized playback sequence. Registering a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. Magic...

169 6 Select Save . Select the memory space you want to save the content to. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Content Time Content --:-- am~ --:-- pm No Item ave ancel --:-- am~ --:-- pm Tim Con Return Delete Internal USB Cancel W...

170 3 Change the details of the local schedule. Next, select Save . Menu1.jpg Menu2 Edit Time Content Time Content --:-- am~ --:-- pm No Item Save Cancel 12:00 am~ 12:00 pm Time Content Return Delete --:-- am~ --:-- pm No Item Deleting a Local Schedule ― Ensure at least one Local Schedule is registe...

171 Running a Local Schedule ― Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 S...

172 Viewing the details of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to ...

173 Copying a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule file...

174 Content Manager Copying content 1 Select Content Manager in the MagicInfo Lite menu screen. MagicInfo Lite Player MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 Select the content you want to copy. Menu2.jpg...

175 Deleting content 1 Select Content Manager in the MagicInfo Lite menu screen. MagicInfo Lite Player MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 Select the content you want to delete. Next, select Delete . ...

176 Settings Settings Server Network Settings Content Default DurationContent RatioImage EffectDefault ContentContent LayoutSchedule NameSafely Remove USB Return Close Random None Landscape YYYYMMDD - The displayed image may differ depending on the model. Server Network Settings To run MagicInfo Lit...

178 When Content is Running Viewing the details of the content that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-LUBXGDSP-0100.18 : Monitor : FF-FF-FF-FF-FF-FF : Local Schedule : Disconnected : Connected : No Schedule to download - The di...

179 Changing the settings for the content that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Tools Standard Standard Off Off Return - The displayed image may differ depending on the model. Press the TOOLS button on the remote control. You can chan...

180 MagicInfo Premium S Chapter 11 A license needs to be purchased to use MagicInfo Premium S . To download the software, go to the Samsung homepage at http://www.samsunglfd.com.To purchase a license, contact a Customer Server Center. File Formats Compatible with MagicInfo Premium S Player Read befo...

184 Network Schedule Multiframe Playback restrictions • A maximum of two video files ( Videos ) can be played simultaneously. • In portrait playback mode, only one video file can be played at a time. • If PIP mode is enabled, more than one video ( Videos ) file cannot be played. • More than one Flas...

185 Playback restrictions • A maximum of two video ( Videos ) files can be played. • If PIP mode is enabled, more than one video ( Videos ) file cannot be played. • More than one Flash file cannot be played. • For Office files (PPT and Word files) and PDF files, only one file type is supported at a ...

198 Template Manager Registering a Template 1 Select Template Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Content Manager Settings Mode Local Schedule Server Connected USB Connected Return Close 2 Select Creat...

199 4 Organize a template by inserting text, video, photo, or PDF files as desired. Create Select the position and background. Use background image Preview Previous Next Cancel - To load a file or manually enter text, select Input Text . Message Message Message Scroll Alignment Color None None Cente...

207 MagicInfo Videowall S Chapter 12 A license needs to be purchased to use MagicInfo Videowall S . To download the software, go to the Samsung homepage at http://www.samsunglfd.com.To purchase a license , contact a Customer Server Center. File Formats Compatible with MagicInfo Videowall S Player Re...

212 Troubleshooting Guide Chapter 13 Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating n...

213 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product ...

217 Other issue Audio or video cuts out intermittently. Check the cable connection and connect it again if required. Using a very hard or thick cable may corrupt audio and video files.Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it is recommended ...

221 Specifications Chapter 14 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name UD55D Panel Size 55 Class (54.6 Inches / 138 cm) Display area (H x V) 1209.6 x 680.4 mm / 47.6 x 26.8 Inches Dimensions (W x H x D) 1213.5 x 684.3 x 96.6 mm / 47.8 x 26.9 x 3.8 Inches Weight (w...

224 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any ...

225 Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select...

227 Appendix Chapter 15 Contact SAMSUNG WORLD WIDE ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (...

228 LATIN AMERICA COSTA RICA 0-800-507-7267 http://www.samsung.com/latin (Spanish)http://www.samsung.com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung.com/latin (Spanish)http://www.samsung.com/latin_en (English) ECUADOR 1-800-10-7267 http://www.samsung.com/latin (Spanish)http://www.s...

230 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ...

231 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. -...

232 Prevention of Afterimage Burn-in Black Matrix Source Drain Data Bus-Line TFT Gate Pixel Electrode (ITO) Storage Capaccitor (Cs) Color-Filter Common Electrode (ITO) What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to...

234 License Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol aretrademarks of Dolby Laboratories. Ⓡ Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS...

235 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method. - Scanning Scanning...