Samsung U32J590UQR - User Manual

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. • Disconnect the power cord f...

10 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide JOG Button DOWN PRESS(ENTER) LEFT Return Power LED UP RIGHT Icons Description JOG Button Multi direc...

11 Eye Saver Mode Volume Features Eye Saver Mode Off • UP/DOWN: Adjust Brightness , Contrast , Eye Saver Mode . • LEFT/RIGHT: Adjust Volume . • PRESS(ENTER): Display Function Key Guide. Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is ...

14 Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen Adjust the Brightness , Contrast and Eye Saver Mode by moving the JOG button. Eye Saver Mode Brightness Contrast Off ― The displayed image may differ depending on the model. ― The default brightness can vary depending on ...

15 Types of Ports ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. HDMI IN 1 HDMI IN 2 DP IN DC 19V Port Description HDMI...

16 Adjusting the Product Tilt ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2° (±2°) ~ 15° (±2°) • The monitor tilt can be adjusted. • Hold the lower part of the product and adjust the tilt carefully. Anti-theft...

17 Precautions for moving the monitor • Do not directly apply pressure on the screen. • Do not hold the screen when moving the monitor. • Do not hold the product upside down only by the stand. • Hold the lower corners or edges of the monitor when moving it.

18 Installing a Wall-mount Kit or Desktop Stand ― Power the product off and remove the power cable from the power socket. 1 2 4 5 3 C A Attach the wall-mount kit or desktop stand here. B Attach the INLAY to the position as shown in the figure. C Bracket (sold separately) Align the grooves and tightl...

19 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. 1 2 3 4 Insert the stand neck into the stand base in the direction shown in the figure....

20 Removing the Stand ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. 1 2 3 4 Place the protective Styrofoam (cushion) included in the package on the floor and place the prod...

21 Connecting and Using a Source Device Chapter 03 Read below before installing the monitor. 1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and positions of the matching ports on the monitor and external devices. 2 Before connecting signal cables, disc...

22 Connection Using the HDMI-DVI Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. HDMI IN 1, HDMI IN 2 ― The audio function is not supported if the source device is connected using the HDM...

23 Connecting the Power DC 19V 2 4 3 1 1 Connect the power plug to the AC/DC adapter. 2 Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor. ‒ Rated power consumption for adapters differs depending on the model. Use an adapter that meets the power consumption specification ...

24 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

25 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifica...

26 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Eco Saving Plus is enabled. ― This men...

27 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is t...

28 Picture Size Change the picture size. ― This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). ― This option is not available when FreeSync is enabled. In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display...

29 Configuring the PIP/PBP Settings A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change w...

30 Size Select the size and aspect ratio of the sub-screen. • : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 2160 (width x height). • : Select the icon image if you want to use PIP mode where the optimum resolutio...

31 Source Select the source for each screen. PIP Mode (available in PIP mode( Size / / )) ― The input source for the main screen changes. ― With the exception of the current input source, the other two input sources can be selected. ― The screen may flicker if the input signal is unstable. ― When th...

33 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject t...

34 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Chapter 07 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to ...

35 The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards:Make sure to install the latest official graphics drivers from AMD that support FreeSync . ― For additional AMD graphic...

36 Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. ― This option is not available when SAMSUNG M A G I C Bright is in Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― This menu is not available when Eye Saver Mode is ...

39 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung website at http://www. samsung.com. ― The software may not work properly if you...

40 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...

43 Specifications Chapter 10 General Model Name U32J590UQ* / U32J592UQ* Size 32 Class (31.5 Inches / 80.1 cm) Display area 698.4 mm (H) x 392.85 mm (V)27.5 Inches (H) x 15.5 Inches (V) Pixel Pitch 0.181 mm (H) x 0.181 mm (V)0.007126 Inches (H) x 0.007126 Inches (V) Maximum Pixel Clock 533.25 MHz (Di...

49 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...

50 WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should ...