Page 2 - Table of contents; Before Using the Product
2 Table of contents Before Using the Product Copyright 5 Securing the Installation Space 6 Precautions for storage 6 Safety Precautions 6 Symbols 6Cleaning 7Electricity and Safety 7 Installation 8Operation 10 Correct posture to use the product 13 Preparations Checking the Components 14 Components 14...
Page 4 - Specifications; Appendix
4 Table of contents Specifications General 78 PowerSaver 80 Standard Signal Mode Table 81 Appendix Contact SAMSUNG WORLD WIDE 83 Responsibility for the Pay Service (Cost to Customers) 86 Not a product defect 86 A Product damage caused by customer's fault 86Others 86 Terminology 87
Page 5 - Copyright
5 Copyright The contents of this manual are subject to change without notice to improve quality. ⓒ 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. ...
Page 6 - Securing the Installation Space; Precautions for storage; Safety Precautions; Caution; RISK OF ELECTRIC SHOCK DO NOT OPEN; Symbols; Warning
6 Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ― The exterior may differ depending on the product. ...
Page 7 - Cleaning; Electricity and Safety
7 Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. ― The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Power off the product and computer. 2...
Page 8 - Installation
8 Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. • Damage to the cord may result in a fire or electric shock. Do not place the power cord or product near heat sources. • A fire or electric shock may result. ! Clean any dust around the pins...
Page 10 - Operation
10 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Center for repairs. ! To move the product, first disconnect all the cables from it, including the power...
Page 13 - Correct posture to use the product
13 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. • Adjust the angle so light doe...
Page 14 - Preparations; Checking the Components; Components
14 Preparations Chapter 02 Checking the Components - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components may differ from the images shown. - Using the HDMI cable that came with the package is recommended. - The optimal resolution may n...
Page 15 - Parts; Control Panel; Icons
15 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE LEFT Return JOG Button Function Key Guide RIGHT DOWN PRESS(ENTER) UP Icons Description JOG Button Mult...
Page 16 - Direct Key guide
16 Direct Key guide Brightness Volume Features Game Mode Off ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. UP/DOWN: Adjust Brightness , Contrast , Sharpness . LEFT/RIGHT: Adjus...
Page 19 - Reverse Side; Port
19 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE Port Description DC 14V Connects to the DC power adapter. HDMI IN 1 ...
Page 20 - Adjusting the Product Tilt and Height
20 Installation Adjusting the Product Tilt and Height ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2˚(±2˚) ~ 20˚(±2˚) 100.0 mm ± 2.0 mm • The monitor tilt and height can be adjusted. • To avoid damage to the pr...
Page 23 - Connecting and Using a Source Device; Before Connecting; Pre-connection Checkpoints; Connecting and Using a PC; Connection Using the HDMI Cable
23 Connecting and Using a Source Device Chapter 03 Before Connecting Check the following before you connect this product with other devices. Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may ...
Page 24 - Connection Using the DP Cable; Connecting to Headphones or Speakers
24 Connection Using the DP Cable ― Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE 1 Connect the DP cable to the DP IN port on the back of the product and the...
Page 25 - Connecting the Power; Power connection using detachable DC power adapter
25 Connecting the Power Power connection using detachable DC power adapter DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE 1 2 3 DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE 1 Connect the power cable to the DC power adapter. Then, connect the DC power adapter to the DC 14V port on the back of the product. 2 Ne...
Page 26 - Tidying Up the Connected Cables
26 1 To remove the COVER-CABLE, hold and pull the COVER-CABLE with your thumb and index finger in the arrow direction while holding the stand with the other hand. DC 14V HDMI IN 1 HDMI IN 2 DP IN SERVICE 2 Insert and fix the cables in the slot. 3 Hold the COVER-CABLE and fix the cables into the groo...
Page 27 - Driver Installation; Setting Optimum Resolution
27 Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― An installation driver is contained on the CD supplied with the product. ― If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and do...
Page 28 - Screen Setup; SAMSUNG MAGIC Bright; In; Configuring SAMSUNG MAGIC Bright
28 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 04 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. ― This m...
Page 30 - Configuring Brightness
30 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Eco Saving Plus is set . SAMSUNG M A G...
Page 31 - Configuring Contrast
31 Contrast Adjust the contrast between the objects and background. (Range: 0~100)A higher value will increase the contrast to make the object appear clearer. ― This option is not available when SAMSUNG M A G I C Bright is in Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mo...
Page 32 - Sharpness; Configuring Sharpness
32 Sharpness Make the outline of objects more clear or blurry. (Range: 0~100)A higher value will make the outline of objects clearer. ― This option is not available when SAMSUNG M A G I C Bright is in Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― Not avai...
Page 33 - Color; Configuring Color
33 Color Adjust the tint of the screen. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― Not available when PIP/PBP Mode is set to On . SAMSUNG M A G I CBright Return Picture Brightness Con...
Page 34 - HDMI Black Level; Configuring the HDMI Black Level Settings
34 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality.If this is th...
Page 35 - Configuring Eye Saver Mode
35 Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation.TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is ' On ', the blue light that wavelength is around 400nm will decrease, and...
Page 36 - Game Mode; Configuring Game Mode
36 Game Mode Configure the product screen settings for game mode.Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. ― Not available when PIP/PBP Mode is set to On . Return Picture Game Mode Response Time Picture Size Screen Adjustment Optim...
Page 37 - Response Time; Configuring the Response Time
37 Response Time Accelerate the panel response rate to make video appear more vivid and natural. ― It is best to set Response Time to Standard or Faster when you are not viewing a movie. ― This menu is not available when PIP/PBP Mode is set to On and the Size is set to / / (PIP Mode). Return Picture...
Page 38 - Picture Size; Changing the Picture Size
38 Picture Size Change the picture size. ― This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). In PC mode Picture Game Mode Response Time Picture Size Screen Adjustment Choose the size and aspect ratio of the picture displayed on screen. Auto Wide Off Return ...
Page 41 - Configuring the PIP/PBP Settings
41 Configuring the PIP/PBP Settings Chapter 05 PIP/PBP The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed on the main screen at the same time the another source device is displayed in inset windows.The PBP (Picture by Picture) function separates...
Page 42 - Configuring PIP/PBP Mode
42 Configuring PIP/PBP Mode PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Turn PIP/PBP Mode on or off. Off On Return - The displayed image may differ depending on the model. Enable or disable the PIP/PBP Mode function. 1 When the Function Key Guide appears, select by m...
Page 43 - Configuring Size
43 Configuring Size PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast 75/75 Select the size and aspect ratio of the sub-screen. Left: HDMI 1Right: HDMI 2 Return - The displayed image may differ depending on the model. Select the size and aspect ratio of the sub-screen. 1 W...
Page 44 - Configuring Position
44 Configuring Position PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Select the position of the sub-screen from the available options. On Main: HDMI 1Sub: HDMI 2 Return - The displayed image may differ depending on the model. Select the position of the sub-screen from...
Page 45 - Configuring Sound Source; PIP mode; PBP mode
45 Configuring Sound Source PIP mode PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Set which screen you want to hear the sound for. On 75 Main: HDMI 1Sub: HDMI 2 Return PBP mode PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Set which scre...
Page 46 - Configuring Source; PIP Mode
46 Configuring Source PIP Mode (available in PIP mode( Size / / )) PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Select the source for each screen. On DisplayPort HDMI 2 Return - The displayed image may differ depending on the model. Select the source for each screen. ...
Page 47 - PBP Mode
47 PBP Mode (available in PBP mode( Size )) PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast Select the source for each screen. On 75/75 Return Source HDMI 1 DisplayPort Apply Cancel - The displayed image may differ depending on the model. Select input sources for the dev...
Page 48 - Configuring Picture Size
48 Configuring Picture Size PIP Mode (available in PIP mode( Size / / )) In PC mode PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size Contrast On Auto Wide Select the image size for each screen. Return In AV mode PIP/PBP PIP/PBP Mode Size Position Sound Source Source Picture Size C...
Page 53 - Coordinating OSD; Transparency; Changing Transparency
53 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Chapter 06 Transparency Set the transparency for the menu windows. 한국어 OnScreen Display Transparency Language Display Time Configure the transparency of the menu windows. Off On Return - The d...
Page 54 - Language; Configuring Language
54 Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. ― It will not be applied to other functions on your PC. DeutschEnglishEspañolFrançaisItaliano OnScreen Display Transparency Language Display Time Set the menu language. Return - T...
Page 55 - Configuring Display Time
55 Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. OnScreen Display Transparency Language Display Time Set how long the me...
Page 56 - Setup and Reset; Configuring Volume
56 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Chapter 07 Sound Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Off 1.2 Auto Acceleration Return Sound Volume Sound Mode Select Sound 50 Sta...
Page 57 - Configuring Sound Mode
57 Configuring Sound Mode Sound Volume Sound Mode Select Sound Standard Music Movie Clear Voice Return - The displayed image may differ depending on the model. 1 When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button. 2 Move to System controlling the JOG ...
Page 58 - Configuring Select Sound
58 Configuring Select Sound Sound Volume Sound Mode Select Sound Stereo Left Channel Right Channel 50 Return - The displayed image may differ depending on the model. 1 When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button. 2 Move to System controlling th...
Page 59 - Eco Saving Plus; Configuring Eco Saving Plus
59 Eco Saving Plus Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Adjust the power consumption of the product to save energy. Return Acceleration Off Auto Low High - The displayed image may differ depending on the model. Configuring Eco Saving Plu...
Page 60 - Configuring Off Timer
60 Off Timer You can set the product to automatically turn off. Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Enable or disable the Off Timer. Off 1.2 Auto Acceleration Return 해제 동작 Off Timer Turn Off After Off Timer Enable or disable the Off Tim...
Page 61 - Configuring Turn Off After
61 Off Timer Turn Off After Off Timer Set the monitor to automatically turn off after a certain time period. On 4h Return - The displayed image may differ depending on the model. Configuring Turn Off After ― This option is only available when Off Timer is set to On . 1 When the Function Key Guide ap...
Page 62 - Configuring PC/AV Mode
62 PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie. Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Set to AV to enlarge the picture. Off 1.2 Auto Acceleration Return PC/AV Mode Displ...
Page 63 - Configuring DisplayPort Ver.
63 DisplayPort Ver. Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time 1.1 1.2 System Select your Displayport. Displayport 1.1 supports HBR 1, while 1.2 su...
Page 64 - Source Detection; Configuring Source Detection
64 Source Detection You can activate Source Detection . ― Not available when PIP/PBP Mode is set to On . Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Decide how input sources will be detected. Auto Manual Return Off - The displayed image may dif...
Page 65 - Key Repeat Time; Configuring Key Repeat Time
65 Key Repeat Time Control the response rate of a button when the button is pressed. 자동 Sound Eco Saving Plus Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time System Configure the response rate of a button when the button is pressed. Acceleration 1 sec 2 sec No Repeat Return Of...
Page 66 - Configuring Power LED On
66 Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. Power LED On Reset All System Set the status of the power LED. Return Working Stand-by - The displayed image may differ depending on the model. Configuring Power LED On 1 When the Func...
Page 67 - Reset All
67 Reset All Return all the settings for the product to the default factory settings. Power LED On Reset All System Return all the settings for the product to the default factory settings. Return Stand-by All the menu settings will be reset to default. Are you sure you want to reset? Yes No - The di...
Page 68 - Information Menu and Others; Displaying Information
68 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Chapter 08 Information View the current input source, frequency and resolution. Displaying Information 1 When the Function Key Guide appears, select by moving the JOG button UP. Nex...
Page 70 - Volume
70 Configuring Volume in the Initial Screen You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed. Volume Mute 50 - The displayed image may differ depending on the model. Volume 1 Adjust the Volume controlling the JOG button LEFT/RIGHT. ― If the audio quality of a...
Page 71 - Installing the Software; System Requirements; OS; Removing the Software
71 Installing the Software Chapter 09 Easy Setting Box Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the Easy Setting Box setup program. ― If the pop-up screen...
Page 72 - Troubleshooting Guide; Testing the Product; Checking the Resolution and Frequency
72 Troubleshooting Guide Chapter 10 Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating no...
Page 73 - Screen issue; Issues
73 Check the following. Installation issue (PC mode) Issues Solutions The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected...
Page 75 - Sound issue; Source device issue
75 Sound issue Issues Solutions There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software progra...
Page 78 - General; Model Name
78 Specifications Chapter 11 - Size - Display area H V - Dimensions ( W x H x D) W D H General Model Name S29E790C Panel Size 29 Class (28.7 Inches / 73 cm) Display area 672.768 mm (H) x 283.824 mm ( V )26.5 Inches (H) x 11.2 Inches ( V ) Pixel Pitch 0.2628 mm (H) x 0.2628 mm ( V )0.010346 Inches (H...
Page 80 - PowerSaver
80 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any k...
Page 83 - NORTH AMERICA
83 Appendix Chapter 12 Contact SAMSUNG WORLD WIDE ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us/support CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.c...
Page 84 - LATIN AMERICA
84 LATIN AMERICA COSTA RICA 0-800-507-726700-800-1-SAMSUNG (726-7864) http://www.samsung.com/latin/support (Spanish)http://www.samsung.com/latin_en/support (English) DOMINICAN REPUBLIC 1-800-751-2676 http://www.samsung.com/latin/support (Spanish)http://www.samsung.com/latin_en/support (English) ECUA...
Page 86 - Responsibility for the Pay Service; Others
86 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a s...
Page 87 - Terminology
87 Terminology OSD (On Screen Display) ____ On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB ____ HUB refers to a device th...
