Samsung S24A336NHU - User Manual

5 Installation Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. ‒ Children may suffocate. • Do not install the product on an unstable or vibrating surface (i...

6 Operation Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Centre for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abn...

7 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Disconnect the power cord from...

8 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light do...

9 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards . ― The exterior may differ depending on the product. 1 2 3 Put the stand base onto the stand neck as the direction shown in the figure. Chec...

10 Removing the Stand ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. 1 22 Place a soft cloth over the table to protect the product and place the product onto the cloth so th...

11 Precautions for moving the product • Hold the lower corners or edges of the product when moving it. • Do not directly apply pressure on the screen. • Do not hold the screen when moving the product. • Do not hold the product upside down only by the stand. • Do not press down on the product. There ...

12 Adjusting the Product Tilt ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -5.0° (±2.0°) ~ +21.0° (±2.0°) • You can adjust the product tilt. • Hold the lower part of the product and adjust the tilt carefully. A...

14 Control Panel ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Return LEFT JOG Button Function Key Guide RIGHT DOWN PRESS(ENTER) UP Power LED Parts Description JOG Button Multi directional button that helps navi...

15 Direct Key guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Brightness Auto Adjustment Features Eye Saver Mode Off • UP/DOWN: Adjust Brightness , Contrast , Sharpness . • LEFT/RIGHT: Adjust Auto Adjust...

16 Connecting and Using a Source Device Chapter 03 Read below before connecting the product. 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before installing the product, ma...

17 Connecting and Using a PC Select a connection method suitable for your PC. Connection Using the D-SUB Cable (Analogue Type) PC Connection Using the HDMI Cable HDMI ― When connecting an HDMI cable, use the cable that came with the components of the product. If you use an HDMI cable other than prov...

18 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.Select a language on information message and change the resolution on your PC to the optimum setting. ― If the optimum resolution is not sel...

19 Menu Function Key Guide → Chapter 04 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture 2nd 3rd Description SAMSUNG MAGIC Bright This menu p...

23 OnScreen Display 2nd 3rd Description Transparency Set the transparency for the menu windows. Position • H-Position : Move the menu position to the left or right. • V-Position : Move the menu position up or down. Language Set the menu language. ― A change to the language setting will only be appli...

24 System 2nd 3rd Description Self Diagnosis Perform this test when you experience a problem with your monitor's picture. ― Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing. Eco Saving Plus Reduce energy consumption compared to con...

27 Installing the Software Chapter 05 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung website (http://www. samsung.com). ― The software may not work properly if you ...

28 Troubleshooting Guide Chapter 06 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Product diagnosis (Screen issue) If a problem occurs wi...

29 The message Check Signal Cable appears. Check that the cable is properly connected to the product.Check that the device connected to the product is powered on.Check the PC/AV Mode status. ( → System → PC/AV Mode → HDMI : PC or AV .) Not Optimum Mode is displayed. This message appears when the sig...

31 Specifications Chapter 07 General Model Name S19A330NH*/S19A332NH*/S19A334NH*/S19A336NH*/S19A338NH* S22A330NH*/S22A332NH*/S22A334NH*/S22A336NH*/S22A338NH* Size 19 Class (18.5 Inches / 47.0 cm) 22 Class (21.5 Inches / 54.5 cm) Display area 409.8 mm (H) x 230.4 mm (V) 478.656 mm (H) x 260.28 mm (V)...

34 Appendix Chapter 08 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...