Samsung S24A314NHU - User Manual

5 Installation Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. ‒ Children may suffocate. • Do not install the product on an unstable or vibrating surface (i...

6 Operation Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Centre for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abn...

7 Caution • Leaving the screen fi xed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Disconnect the power cord from...

8 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light do...

Before assembling the product, place the product down on a flat and stable surface so that the screen is facing dow nwards. 9 Preparations Chapter 02 Installation Attaching the Stand ― 4 2 3 1 Stand assembly is complete. Place the protective Styrofoam (cushion) included in the package on the floor and...

10 ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. Removing the Stand 1 2 3 4 Push the key downward and hold. remove the stand base from the stand neck by pulling it in the arrow direction, as shown in the figure. Push the key d...

11 Precautions for moving the product • Hold the lower corners or edges of the product when moving it. • Do not directly apply pressure on the screen. • Do not hold the screen when moving the product. • Do not hold the product upside down only by the stand. • Do not press down on the product. There ...

Adjusting the Product Tilt 12 -5.0° (±2.0°) ~ +15.0° (±2.0°) Optional The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. The product tilt can be adjusted. Hold the lower part of the product and adjust the tilt carefully...

14 Control Panel ― The colour and shape of parts may differ from what is sho wn. Specifi cations are subject to change without notice to improve quality. Parts Description Menu Pops up the menu/Backs to the previous menu (in case of main menu, exits from the whole menu). Power Off Power switch, press...

15 Connecting and Using a Source Device Chapter 03 Read below before connecting the product. 1 Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before connecting the product, ma...

Connecting and Using a PC Connecting the Power Connection Using an HDMI-DVI Cable Connection Using the HDMI Cable Connection Using the D-SUB Cable (Analogue Type) 16 Select a connection method suitable for your PC. ― When connecting an HDMI cable, use the cable that came with the components of the p...

17 Menu Chapter 04 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is sho wn. Specifi cations are subject to change without notice to improve quality. You can adjust the general brightness of the picture. (Range: 0~100)A higher val...

18 2nd 3rd Description This menu provides an optimum picture quality suitable for the environment where the product will be used. • FPS : Increase the brightness of darker areas of the FPS (First-Person Shooter) game screen. This mode increases visibility of your enemies during a FPS (First-Person S...

19 2nd 3rd Description Warm Adjust the tint of the screen. Color Tone : Select a colour tone that best suits your viewing needs. Cool User Red : Adjust the red saturation level. Values closer to 100 mean greater intensity for the colour. Green : Adjust the green saturation level. Values closer to 10...

22 Adjust 2nd 3rd Description Auto adjust Automatically adjust the horizontal/vertical location, focusing and clock of pictures . (only for vga signals.) Auto color Adjust the white balance of pictures. (only for vga signals) Gamma Adjust the middle level of luminance. ― Gamma 1 / Gamma 2 Self Diagn...

2nd 3rd Description Off Timer Reset Coarse Inactivate the function of timed switch-off. Activate the function of timed switch-off. Other Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. ― It will not be applied to other functions o...

24 Installing the Software Chapter 05 Easy Setting Box Easy Setting Box enables users to use the product by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung website (http://www. samsung.com). ― The software may not work properly if you ...

25 Troubleshooting Guide Chapter 06 Requirements Before Contacting Samsung Customer Service Centre ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Product diagnosis (Screen issue) If a problem occurs wi...

26 Check that the cable is properly connected to the product.Check that the device connected to the product is powered on. The images on the screen look distorted. The screen is not clear. The screen is blurry. The screen is too bright. The screen is too dark. Screen colour is inconsistent. The colo...

28 Specifi cations Chapter 07 General Model Name S19A31* S22A31* S24A31* Size Class (18.5 19 Inches / 47.0 cm) 24 Class (23.8 Inches / 60.4 cm) Display area 409.8mm (H) x 230.4 mm (V) 527.04 mm (H) x 296.46 mm (V) Pixel Pitch 0.300 mm (H) x 0.300 mm (V) 0.2745 mm (H) x 0.2745 mm (V) Maximum Pixel Clo...

32 Appendix Chapter 08 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...