Ryobi BT3000- Manual
Ryobi BT3000– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INTRODUCTION
- Page 3 – LIST OF LOOSE PARTS
- Page 4 – ASSEMBLY; IMPORTANT; TO INSTALL REMAINING T-NUTS; ROUTER MOUNTING
- Page 5 – TO INSTALL DUST COVER AND PIVOT ASSEMBLY
- Page 7 – FINAL ASSEMBLY; PREPARING FOR OPERATION
- Page 8 – TO ASSEMBLE JIG SAW TO MOUNTING PLATE; JIG SAW MOUNTING; TO ADJUST JIG SAW ON MOUNTING PLATE
- Page 10 – CIRCLE CUTTING JIG; CIRCLE CUTTING
- Page 11 – TO PLACE WORKPIECE ON SAW TABLES; COMPLETED SET-UP FOR CIRCLE CUTTING
- Page 13 – DESCRIPTION
- Page 14 – RYOBI TECHNOLOGIES INC.
OPERATOR'S MANUAL
#4950300 ROUTER AND JIG SAW MOUNTING KIT
(FOR USE WITH THE BT3000 TABLE SAW)
Save This Manual For Future Reference
CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT.
Your new #4950300 Router and Jig Saw Mounting Kit has been designed for use with the RYOBI BT3000 Table Saw. It
has been engineered and manufactured to Ryobi’s high standards for dependability, ease of operation, and operator safety.
This kit gives you the capability of mounting a router or jig saw on the accessory table of your BT3000. It also includes a circle
cutting jig for cutting circular patterns in both large and small stock. Properly cared for, it will provide years of dependable,
trouble-free performance.
RULES FOR SAFE OPERATION
1.
READ THESE INSTRUCTIONS THOROUGHLY before assembling or using this router and jig saw mounting kit.
2.
READ THE INSTRUCTIONS FOR THE BT3000 TABLE SAW before operating your saw with this kit.
3.
KEEP ASSEMBLY AREA AND WORK AREA CLEAN. Cluttered areas and benches invite accidents.
4.
ALWAYS WEAR SAFETY GLASSES . Everyday eyeglasses have only impact-resistant lenses; they are NOT safety
glasses.
5.
DO NOT USE THIS PRODUCT WITH OTHER EQUIPMENT OR FOR OTHER PURPOSES.
6.
ALWAYS DISCONNECT SAW FROM POWER SUPPLY BEFORE ASSEMBLING THIS KIT. Make sure switch is off
when reconnecting saw to power supply.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi BT3000
Summary
Page 2 RULES FOR SAFE OPERATION (Continued) 7. DO NOT MAKE ADJUSTMENTS UNTIL CUTTER OR BLADE HAS COME TO A COMPLETE STOP AND TOOL HASBEEN DISCONNECTED FROM POWER SOURCE. 8. FEED WORKPIECE AGAINST ROTATION OF CUTTER. 9. DO NOT USE AWKWARD HAND POSITIONS. 10. KEEP FINGERS AWAY FROM REVOLVING CUTTER, U...
Page 3 DESCRIPTION QUANTITY Guide Fence with Guide Block ................................ 2Knob Bolt (#5/16-18 x 1/2 in.) ................................. 45/16" Washer ........................................................... 55/16" T-Nut (Special) ..........................................
Page 4 ASSEMBLY Read these instructions completely before beginning assembly of this kit. WARNING: The saw's motor cord must be disconnected from thereceptacle provided on the saw when using this kit witha Router or Jig Saw mounted to the accessory table.The power supply cord of the Router or Jig Sa...
