Rosewill RSV-Z4000 - Manual

Page 2 - INDEX

SERVER RSV-Z4000 User Manual INDEX Introduction Specifications Top Cover Disassembly 5.25" Device Installation 3.5" Device Installation Fan Filter Replacement Fan Replacement Installation Motherboard Installation Power Supply Installation USB cable Instructions Accessory Kit Index LED Indica...

Page 3 - RSV-Z4000 RACKMOUNT CHASSIS

SERVER RSV-Z4000 User Manual Introduction: Specifications: RSV-Z4000 RACKMOUNT CHASSIS The RSV-Z4000 is a 19" rackmount industrial grade server PC, which is designed for extended ATX form factor server board and can be equipped with PS2 power supply or mini-redundant power supply. In addition, t...

Page 4 - Top Cover Disassembly

SERVER RSV-Z4000 User Manual 3 Top Cover Disassembly 5.25” Device installation (A) 5.25” cage disassemblly (B) Dismount the front cover plate 1.Release the thumb screws of the top cover 1.Release the screws of the cage 2.Lift up the cage 2.Slide back the lop cover and lift up 1.Release the screws of...

Page 5 - Place the disk cage back to the case

4 SERVER RSV-Z4000 User Manual (C) CD-ROM installation (D) Other device installation 1.Place CD-ROM in the disk cage 3.Place the disk cage back to the case 2.Affix the CD-ROM to the disk cage with screws 1.Place D340 in the disk cage 2.Affix the D340 to the disk cage with screws 2 1 3 1 2

Page 7 - ” Device installation

1 2 6 SERVER RSV-Z4000 User Manual 3.5” Device installation (A) 3.5” cage Dismount (B) Metal cover plate dismount (C) 3.5” device installation 1.Release the screws from 3.5” cage 2.Pull out and dismount the 3.5” cage 1.Release the screws of metal cover plate 2.Dismount the cover plate from 45 0 angl...

Page 8 - Fan filter replacement

7 SERVER RSV-Z4000 User Manual Fan filter replacement Fan replacement installation (A) 12cm fan replacement (B) 8cm fan replacement 1.Pull out the filter bracket and remove the used filter 2.Replace with new fan filter 3.Mount the filter bracket 1.Remove the 8cm fan from fan holder 2.Replace with th...

Page 9 - Motherboard installation; Release the screws from bracket

8 SERVER RSV-Z4000 User Manual Motherboard installation (A) Interface card bracket installation (B) Motherboard installation 1.Release the screws from bracket 2.Remove the bracket from 45 0 angle 3 1.Affix the standoffs on the M/B base 2.Place the motherboard on the standoffs and affix with #6-32 sc...

Page 10 - Plug the interface card to the motherboard slot

9 SERVER RSV-Z4000 User Manual (C) Interface installation 1.Plug the interface card to the motherboard slot 1 2.Affix the interface card bracket to the case by screw 3.Loose the thumb screws to adjust the hold down clamp to the interface card 1 3 2 Note : Do Not take the screws out

Page 11 - Power supply installation; Affix the hold sown clamp with thumb screws

10 SERVER RSV-Z4000 User Manual Power supply installation 4.Affix the hold sown clamp with thumb screws 2 1.Place the power supply into the case 2.Affix the power supply with screws 1 2

Page 12 - USB cable instructions:; Pin-Connection of USB cable; Accessory kit index

SERVER RSV-Z4000 User Manual 11 USB cable instructions: We cannot give any quarantee when the components damaged by yourself. Pin-Connection of USB cable 1. Please check before installation, you can use the USB-Station on your Motherboard. Please take a look on the manual of your Motherboard and sea...

Rosewill RSV-Z4000 - Manual

Table of Contents:

Summary

Other Rosewill Models