Rosewill RCX-Z4 - Manuals

Stick the protective insulated film onto the back of the heatsink retention brackets. 3 4 O Apply the proper amount of thermal compound on the CPU surface, a thin film is ideal, extra thermal compound will not improve performance.Make sure the CPU surface is perfectly clean. FOR AMD K8 Place the RCX-...

Place the RCX-Z4 on the top of theCPU, align two holes ( shown in red as the picture below ) of heatsink retention bracket with theMotherboard holes.Using the K8 screws with spring inserted, screwing downinto the motherboard backplate. See page 10-11 for the backplate fancontroller and fan Installat...

Remove the fan from the sink byunscrewing the four black screws. Take off the pre-attached pair ofK8-AM2 heatsink retention bracket; keep the four screws for the next 6 user manual COOLER RCX-Z4 E INTEL P4 LGA775 Installation 1 2 Attach both of the LGA775 heatsink retention bracketsto the heatsink b...

Place the cooler onto the four screws, secure the cooler with four more collars . 9 user manual COOLER RCX-Z4 Screw the fan onto the heatsink using the four black screws. Apply the proper amount of thermal compound on the CPU surface, a thin film is ideal, extra thermal compound will not improve per...

Connect the fan cable with 3 pinconnector to the Fan ControllerCable. 10 user manual COOLER RCX-Z4 Connect the 3-pin connector of the Y fan cable assigned with a yellow and a black cable to the CPU fan motherboard connector. Remove a PCI slot backplate andinstall the fan control unit. 1 2 3 For the ...