Rosewill RSV-R26 - Manual
Rosewill RSV-R26 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Server; A list of mounting parts; Slide rails x 2; Step 1; Take the sliding rail apart by sliding out the center slide.; Outer slide rail
- Page 3 – Step 2; Center slide rail x 2; Step 3; To pull it out of the cabinet
- Page 4 – Adjust the brackets according to the width of the cabinet.
- Page 5 – Step 5
Server
RSV-R26
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Server RSV-R26 User Manual A list of mounting parts Slide rails x 2 Latches x 4 M5 x 8L Screws x 18 M4 x 6L Screws x 18 “L” Brackets x 4 Installation manual X 1 Washers x 10 Round-cappedPhillips Screws x 10 M4 Screw cap x 10 Step 1 Take the sliding rail apart by sliding out the center slide. Outer s...
Server RSV-R26 User Manual Step 2 Install the center slide to both sides of the chassis, then secure the center slides with M4*6L screws. The rackmount chassis To pull it out of the cabinet Back-end Front-end Center slide rail x 2 M4 x 6L Screws Attention: 1. Put the center slide right next to the c...
Server RSV-R26 User Manual Step 4 (type1) Install the latches onto the front-side of the pillar of a rackmount cabinet. Use M5 x 8L screws to secure the L brackets onto the latches (4 places). Please align the screw holes on the pillar with the screw holes on the brackets. Attention: 1. Adjust the b...
