Rosewill RGS-1024 - Manuals

Page 2 - COPYRIGHT & TRADEMARKS

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -1- COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the speci...

Page 3 - FCC STATEMENT

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -2- FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when t...

Page 4 - CE Mark Warning; Safety Warning

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -3- CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Safety Warning • Place connecting cables carefully so that no on...

Page 6 - Package Contents

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -5- Package Contents The following contents should be found in your package: ¾ One RGS-1024 Switch ¾ One power cord ¾ This User Guide ¾ Rubber footpads for Desk-mount ¾ Rack-mount kit for installing the switch in a 19-inch rack ) Note: Make sure t...

Page 7 - Chapter 1. Introduction of the Product; Overview of the Product

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -6- Chapter 1. Introduction of the Product This chapter describes the features of the RGS-1024 24-port Gigabit Ethernet Switch. 1.1 Overview of the Product The RGS-1024 24-port Gigabit Ethernet Switch provides you with a high-performance, low-cost...

Page 10 - Chapter 2. Installation; Mounting the Switch on a Desk; Mounting the Switch in a Rack

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -9- Chapter 2. Installation 2.1 Mounting the Switch on a Desk Before place the Switch on a desk, attach four rubber footpads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be have as much as 5kg placed on top. No...

Page 12 - Chapter 3. Identifying External Components

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -11- Chapter 3. Identifying External Components This Chapter describes the front panel, rear panel and LED indicators of the Switch. 3.1 Front Panel The front panel of the RGS-1024 consists of switch LED indicators, 24 10/100/1000Mbps RJ-45 ports....

Page 14 - Appendix A: Specifications; General

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -13- Appendix A: Specifications General Standards IEEE802.3 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T Topology Star Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (...

Page 15 - Environmental and Physical

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -14- Transfer Method Store-and-Forward MAC Address Learning Automatically learning, automatically aging 10Base-T: 14881pps/Port 100Base-Tx: 148810pps/Port Frame Filter Rate 1000Base-T: 1488095pps/Port 10Base-T: 14881pps/Port 100Base-Tx: 148810pps/...

Page 16 - Appendix B: Troubleshooting; The Power LED is not lit; Rosewill Customer Service Support:

24-Port Gigabit Ethernet Switch RGS-1024 User Manual -15- Appendix B: Troubleshooting 1. The Power LED is not lit ¾ Make sure the AC power cord connected the Switch with power source properly. ¾ Make sure the power source is ON. 2. The Link/Act LED is not lit when a device is connected to the corres...