Rosewill RP500-2 - Manual

Rosewill RP500-2

Rosewill RP500-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 4 – Specification; POWER SUPPLY
  • Page 5 – Power Good Signal; Power Good Signal Characteristics; Over Voltage Protection; Nominal output voltage
  • Page 6 – Physical Environment; Operating Conditions; Temp. vs Load Condition; RH
  • Page 7 – Regulatory Compliance; Safety Requirement; The power supply ground leakage current shall be less than 3.5mA.; Ground Continuity; The power supply grounding continuity shall be less than 100m
  • Page 8 – Connectors
  • Page 9 – Installing Power Supply; Affix the power supply to the case with screws.; Installation; Take the 20 pin connector.
  • Page 10 – Take the 24 pin connector
  • Page 11 – pin SATA Connector
  • Page 12 – Before starting your system; NOT
Loading the manual

POWER SUPPLY

PERFORMANCE Series

USER Manual

RP500-2
RP500-2-S
RP550-2
RP550-2-S

P

PERFORMANCE

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 4 - Specification; POWER SUPPLY

1. AC Input RP500-2, RP500-2-S AC Input Voltage : 115V(100-120V) / 230V(200-240V)AC Input Frequency : 47 - 63 HZAC input Current : 10.0A(RMS) for 115VAC Input, 60Hz 5.5A(RMS) for 230VAC Input, 50Hz RP550-2, RP550-2-S AC Input Voltage : 115V(100-120V) / 230V(200-240V)AC Input Frequency : 47 - 63 HZAC...

Page 5 - Power Good Signal; Power Good Signal Characteristics; Over Voltage Protection; Nominal output voltage

2.2 Efficiency The power supply is a minimum of 72% efficient under typical load. The “Energy Star” efficiency of the power supply is a minimum of 50% when the AC input power is 60W. 2.3 Remote ON/OFF control The power supply DC outputs (with the exception of +5 VSB which is always available) are en...

Page 6 - Physical Environment; Operating Conditions; Temp. vs Load Condition; RH

3.2 Short Circuit Protection A short circuit on any DC output will cause the power to latch. The power supply will withstand a continuous short circuit to the output without damage or overseers to the unit. The +5VSB can be shorted indefinitely and will recover automatically when the short is remove...

Other Rosewill Models

All Rosewill Other