Rosewill RC-209 - Manual
Rosewill RC-209 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Content; RAID introduction; User Manual
- Page 3 – Feature Highlights; Pentium-class computer with one available PCI slot
- Page 4 – Magic Switch introduction and jumper setting
- Page 5 – *Jumper setting for pin and 2 pin close
- Page 7 – Hardware Installation
- Page 8 – Important message for user; This RAID array to be used on; New/Blank hard drives. Striping will destroy all existing data; on the original hard drive.; Manual Configuration is offered.
- Page 9 – The default chunk size is; 4k when selecting Auto configuration.; . As the BIOS boots press; Ctrl+S or F4 when prompted to enter the RAID BIOS.; At the next screen select
- Page 11 – SATA 4 Port PCI Adaptor with RAID RC209
- Page 12 – Creating a SPARE Drive
- Page 14 – CONCATENATION
- Page 15 – Deleting RAID Arrays; Select the RAID set then press; Resolving Conflicts; connection information, will be written to the replacement disk.; Low Level Format
- Page 16 – BIOS will show up and indicate the devices attached to it.; Driver Installation
- Page 17 – Choose the correct OS for your future system.
- Page 19 – Detail guide
- Page 20 – For New Installation
- Page 21 – complete the Windows installation.; For Windows® 98SE
- Page 22 – file’s location. Press; For Windows® Me
- Page 23 – To Verify Windows® 98SE/Me Installation; Thank you for purchasing a quality Rosewill Product.
SATA 4 Port PCI Adaptor with RAID RC209
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Content • Feature highlights .............................................................................. • Package contents .............................................................................. • System requirement ............................................................................
User Manual SATA 4 Port PCI Adaptor with RAID RC209 SiI 3114 SATA PCI Card Feature Highlights • Silicon Image SiI34 SATA controller chip• Compliant with PCI Specification, Rev. 2.3, 32bit, 33/66Mhz• Compliant with Serial ATA .0 specification• Provides four independent channels to support up to four ...
2 User Manual SATA 4 Port PCI Adaptor with RAID RC209 Magic Switch introduction and jumper setting Before installing the SiI 34 SATA PCI Card, please see the photo below which shows all the ports & jumpers on this PCI Card. A SATA Connector (internal) B SATA Connector 2 (internal) C SATA Connect...
